Pfsense on WatchGuard XTM 1050 hardware

_Adrian_

Network interfaces
• 14x GbE Copper RJ45, 1000Base-T, 100Base-TX, or 10 Base-T (10/100/1000Mbps)
• Includes 10x fixed ports, 4x on removable module
• Interfaces 12 and 13 are labeled Management Ethernet

Fiber Option
(replaces 4 of the 14 RJ-45 ports)
• 4 GbE SFP Module replaces standard 4x Copper module
• Includes 4x 1000BaseSX Optical Transceivers
– 850 nm Vertical Cavity Surface Emitting Laser (VCSEL)
– LC-Duplex Fiber Connector

10 Gb Interface Module
(replaces 4 of the 14 RJ-45 ports)
• 10 Gb Interface Module replaces standard 4x Copper module
• Includes 2x 10Base-SR 850nm Multimode SFP+ transceivers
– Each interface operates at 10Gb only

I/O interfaces
• 2x USB
• 1x Serial RS232 RJ45

I'm interested in this as well!
They are fairly "cheap" for dedicated Firewall / IDS Appliance than can possibly run pfSense.

Question is now :

Are the network chips and cards recognized in FreeBSD ?

Pro's in my book :

10GBE Support
Gigabit FC Ethernet support
All ports on front of unit
Rack Mountable
Dual Quad Core and lots of Memory/CPU for intensive plug-ins as Squid / Snort / Antivirus

Cons:

Power Usage but then again almost everything that's rack mounted wasn't really designed in mind for a "home" user

genic

@_Adrian_:

Network interfaces
• 14x GbE Copper RJ45, 1000Base-T, 100Base-TX, or 10 Base-T (10/100/1000Mbps)
• Includes 10x fixed ports, 4x on removable module
• Interfaces 12 and 13 are labeled Management Ethernet

Fiber Option
(replaces 4 of the 14 RJ-45 ports)
• 4 GbE SFP Module replaces standard 4x Copper module
• Includes 4x 1000BaseSX Optical Transceivers
– 850 nm Vertical Cavity Surface Emitting Laser (VCSEL)
– LC-Duplex Fiber Connector

10 Gb Interface Module
(replaces 4 of the 14 RJ-45 ports)
• 10 Gb Interface Module replaces standard 4x Copper module
• Includes 2x 10Base-SR 850nm Multimode SFP+ transceivers
– Each interface operates at 10Gb only

I/O interfaces
• 2x USB
• 1x Serial RS232 RJ45

I'm interested in this as well!
They are fairly "cheap" for dedicated Firewall / IDS Appliance than can possibly run pfSense.

Question is now :

Are the network chips and cards recognized in FreeBSD ?

Pro's in my book :

10GBE Support

Gigabit FC Ethernet support

All ports on front of unit

Rack Mountable

Dual Quad Core and lots of Memory/CPU for intensive plug-ins as Squid / Snort / Antivirus

Cons:

Power Usage but then again almost everything that's rack mounted wasn't really designed in mind for a "home" user

correct, i am currently trying to get pfsensenano installed on it, but i cant get the stupid console port to work. i have tried a plain ol' cisco rj45-to-serial connection, but i am getting nothing.

i do however get the management ports showing up as connected, but i cant figure out which IP they might be on.

i am still trying to bang this thing out. i modded all the fans (even the power unit fans) so it is muuuuch more quiet. (quiet enough to talk over at a normal voice)

i will update with what i can/cant get to work.

:D

*** update ***

got nano version to install..i will attach the output dump shortly. 13gb interfaces..much more room to play with. along with 8 cpu's. not bad for under 200$ (not including the ram upgrade to be done shortly)

*** update ***

stephenw10

It could be similar to the XTM8 that has 2 on-board serial ports but the front console port is in fact com2. This is a problem because the Nano images are hard coded to use com1 as the serial console and, on the XTM8 at least, the other serial port is not populated. However the BIOS is still accessible via the console port at 115200bps, hit 'TAB' to enter it, so you might try that to prove the cable.
Cisco often had 'odd' cables that were different to those of other manufacturers. Not sure about their RJ45 cables though.

Looking at the photos in the docs the console port appears to be on the end of a header cable. Perhaps you can swap that for a standard DB9 header instead.

Steve

Edit: Took too long typing. ::) What was the trick?

genic

here is the jist so far..more below

i installed the following release: pfSense-2.1.1-RELEASE-4g-i386-nanobsd.img.gz
(should i use amd64 to utilize all the ram currently installed? i am going to up the amount to at least 32gb in the near future)

connecting to the console port with a normal serial->rj45 cable works. you do not have to change the speed from 9600…..
it is pretty straight forward just like installing a nano version on a watchguard firebox x700 ...the following links helped me learn a LOT about the internals and options..tks!
http://xtmbox.ru/docs/xtm_1050.pdf
http://www.watchguard.com/docs/corporate/wg_xtm10De-MFR_instructions.pdf
http://www.portwell.com/pdf/CA/NAR-7090.pdf
https://www.watchguard.com/docs/datasheet/wg_ngfw_ds.pdf

here is the bootup output dump. i have included some questions within the bootup output dump notated by <–


1  pfSense
2  pfSense

F6 PXE
Boot:  1
/boot/config: -h

FreeBSD/x86 boot
Default: 0:ad(0,a)/boot/loader
boot:
Consoles: serial port
BIOS drive C: is disk0
BIOS 639kB/3668864kB available memory

FreeBSD/x86 bootstrap loader, Revision 1.1
(root@snapshots-8_3-i386.builders.pfsense.org, Wed Sep 11 18:59:49 EDT 2013)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x9162bc data=0x51d734+0x9e0c4 syms=[0x4+0x9aa90+0x4+0x                                                                                d51ab]
-
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
4718592K of memory above 4GB ignored	<-- i have 8gb of ram installed, why is it ignoring the full 8gb.. non-64bit?
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p11 #0: Wed Sep 11 19:13:36 EDT 2013
    root@snapshots-8_3-i386.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc                                                                                /src/sys/pfSense_wrap.8.i386 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz (2327.52-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Family = 6  Model = 17  Stepping = 6
  Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,c   ="" mov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe="">Features2=0xce3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca,   ="" sse4.1="">AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
real memory  = 8589934592 (8192 MB)
avail memory = 3664801792 (3495 MB)     <-- i have 8gb of ram installed, why is it ignoring the full 8gb.. non-64bit?
ACPI APIC Table: <100608 APIC1630>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <version 2.0="">irqs 0-23 on motherboard
ioapic1 <version 2.0="">irqs 24-47 on motherboard
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /bo                                                                                ot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07330f0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /b                                                                                oot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0733190, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw                                                                                /.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in                                                                                 /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0733230, 0) error 1
wlan: mac acl policy registered
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <100608 XSDT1630> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <acpi cpu="">on acpi0
cpu1: <acpi cpu="">on acpi0
cpu2: <acpi cpu="">on acpi0
cpu3: <acpi cpu="">on acpi0
cpu4: <acpi cpu="">on acpi0
cpu5: <acpi cpu="">on acpi0
cpu6: <acpi cpu="">on acpi0
cpu7: <acpi cpu="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
pcib1: <acpi pci-pci="" bridge="">at device 2.0 on pci0
pci8: <acpi pci="" bus="">on pcib1
pcib2: <acpi pci-pci="" bridge="">irq 16 at device 0.0 on pci8
pci10: <acpi pci="" bus="">on pcib2
pcib3: <acpi pci-pci="" bridge="">at device 0.0 on pci10
pci13: <acpi pci="" bus="">on pcib3
em0: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xdf00-0xdf1f mem 0xfde80                                                                                000-0xfde9ffff,0xfde60000-0xfde7ffff irq 16 at device 0.0 on pci13
em0: Using an MSI interrupt
em0: [FILTER]
em1: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xdf80-0xdf9f mem 0xfdee0                                                                                000-0xfdefffff,0xfdec0000-0xfdedffff irq 17 at device 0.1 on pci13
em1: Using an MSI interrupt
em1: [FILTER]
pcib4: <acpi pci-pci="" bridge="">at device 1.0 on pci10
pci12: <acpi pci="" bus="">on pcib4
em2: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xcf00-0xcf1f mem 0xfdc80                                                                                000-0xfdc9ffff,0xfdc60000-0xfdc7ffff irq 17 at device 0.0 on pci12
em2: Using an MSI interrupt
em2: [FILTER]
em3: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xcf80-0xcf9f mem 0xfdce0                                                                                000-0xfdcfffff,0xfdcc0000-0xfdcdffff irq 18 at device 0.1 on pci12
em3: Using an MSI interrupt
em3: [FILTER]
pcib5: <acpi pci-pci="" bridge="">at device 2.0 on pci10
pci11: <acpi pci="" bus="">on pcib5
em4: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xbf00-0xbf1f mem 0xfdac0                                                                                000-0xfdadffff irq 18 at device 0.0 on pci11
em4: Using an MSI interrupt
em4: [FILTER]
em5: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xbf80-0xbf9f mem 0xfdae0                                                                                000-0xfdafffff irq 19 at device 0.1 on pci11
em5: Using an MSI interrupt
em5: [FILTER]
pcib6: <acpi pci-pci="" bridge="">at device 0.3 on pci8
pci9: <acpi pci="" bus="">on pcib6
pcib7: <acpi pci-pci="" bridge="">at device 3.0 on pci0
pci7: <acpi pci="" bus="">on pcib7
pcib8: <acpi pci-pci="" bridge="">at device 4.0 on pci0
pci6: <acpi pci="" bus="">on pcib8
em6: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xaf00-0xaf1f mem 0xfd980                                                                                000-0xfd99ffff,0xfd960000-0xfd97ffff irq 16 at device 0.0 on pci6
em6: Using an MSI interrupt
em6: [FILTER]
em7: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0xaf80-0xaf9f mem 0xfd9e0                                                                                000-0xfd9fffff,0xfd9c0000-0xfd9dffff irq 17 at device 0.1 on pci6
em7: Using an MSI interrupt
em7: [FILTER]
pcib9: <acpi pci-pci="" bridge="">at device 5.0 on pci0
pci5: <acpi pci="" bus="">on pcib9
em8: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0x9f00-0x9f1f mem 0xfd780                                                                                000-0xfd79ffff,0xfd760000-0xfd77ffff irq 16 at device 0.0 on pci5
em8: Using an MSI interrupt
em8: [FILTER]
em9: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0x9f80-0x9f9f mem 0xfd7e0                                                                                000-0xfd7fffff,0xfd7c0000-0xfd7dffff irq 17 at device 0.1 on pci5
em9: Using an MSI interrupt
em9: [FILTER]
pcib10: <acpi pci-pci="" bridge="">at device 6.0 on pci0
pci4: <acpi pci="" bus="">on pcib10
em10: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0x8f00-0x8f1f mem 0xfd58                                                                                0000-0xfd59ffff,0xfd560000-0xfd57ffff irq 16 at device 0.0 on pci4
em10: Using an MSI interrupt
em10: [FILTER]
em11: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0x8f80-0x8f9f mem 0xfd5e                                                                                0000-0xfd5fffff,0xfd5c0000-0xfd5dffff irq 17 at device 0.1 on pci4
em11: Using an MSI interrupt
em11: [FILTER]
pcib11: <acpi pci-pci="" bridge="">at device 7.0 on pci0
pci3: <acpi pci="" bus="">on pcib11
em12: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0x7f00-0x7f1f mem 0xfd38                                                                                0000-0xfd39ffff,0xfd360000-0xfd37ffff irq 16 at device 0.0 on pci3
em12: Using an MSI interrupt
em12: [FILTER]
em13: <intel(r) 1000="" pro="" network="" connection="" 7.3.2="">port 0x7f80-0x7f9f mem 0xfd3e                                                                                0000-0xfd3fffff,0xfd3c0000-0xfd3dffff irq 17 at device 0.1 on pci3
em13: Using an MSI interrupt
em13: [FILTER]
pcib12: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
pci2: <acpi pci="" bus="">on pcib12
pci2: <encrypt decrypt,="" network="" computer="" crypto="">at device 0.0 (no driver attached)
uhci0: <intel 3100="" 631xesb="" 632xesb="" usb="" controller="" usb-1="">port 0xef00-0xef1f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <intel 3100="" 631xesb="" 632xesb="" usb="" controller="" usb-1="">on uhci0
uhci1: <intel 3100="" 631xesb="" 632xesb="" usb="" controller="" usb-2="">port 0xef80-0xef9f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <intel 3100="" 631xesb="" 632xesb="" usb="" controller="" usb-2="">on uhci1
ehci0: <intel 63xxesb="" usb="" 2.0="" controller="">mem 0xfdfffc00-0xfdffffff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <intel 63xxesb="" usb="" 2.0="" controller="">on ehci0
pcib13: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci1: <acpi pci="" bus="">on pcib13
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel 63xxesb2="" sata300="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376 at device 31.2 on pci0
ata0: <ata channel="">at channel 0 on atapci0
ata0: [ITHREAD]
ata1: <ata channel="">at channel 1 on atapci0
ata1: [ITHREAD]
pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
acpi_button0: <power button="">on acpi0
atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <parallel port="" bus="">on ppc0
ppi0: <parallel i="" o="">on ppbus0
acpi_throttle0: <acpi cpu="" throttling="">on cpu0
acpi_throttle1: <acpi cpu="" throttling="">on cpu1
acpi_throttle1: failed to attach P_CNT	<-- what failed here?
device_attach: acpi_throttle1 attach returned 6
acpi_throttle2: <acpi cpu="" throttling="">on cpu2
acpi_throttle2: failed to attach P_CNT	<-- what failed here?
device_attach: acpi_throttle2 attach returned 6
acpi_throttle3: <acpi cpu="" throttling="">on cpu3
acpi_throttle3: failed to attach P_CNT	<-- what failed here?
device_attach: acpi_throttle3 attach returned 6
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <intel>at usbus0
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen1.1: <intel>at usbus1
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
usbus2: 480Mbps High Speed USB v2.0
ad0: 3823MB <transcend 20080820="">at ata0-master PIO4
ugen2.1: <intel>at usbus2
uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
SMP: AP CPU #6 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus2
Root mount waiting for: usbus2
uhub2: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ufs/pfsense0
WARNING: / was not properly dismounted
Configuring crash dumps...
Mounting filesystems...
mount: /dev/ufs/pfsense0 R/W mount of / denied. Filesystem is not clean - run fsck.: Operation not permitted
** /dev/ufs/pfsense0
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
7746 files, 630390 used, 3149638 free (1598 frags, 393505 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
** /dev/ufs/cf
** Last Mounted on /cf
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
28 files, 3851 used, 97204 free (36 frags, 12146 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
Setting up memory disks... done.
Disabling APM on /dev/ad0

     ___
 ___/ f \
/ p \___/ Sense
\___/   \
    \___/

Welcome to pfSense 2.1-RELEASE  ...

Creating symlinks......done.
External config loader 1.0 is now starting... ad0s3
Launching the init system... done.
Initializing............................. done.
Starting device manager (devd)...done.
Loading configuration......done.

Default interfaces not found -- Running interface assignment option.

Valid interfaces are:    
*all interfaces are noted as 'up', but i only plugged in my wan connection into port '0' - interface em4 .. why would it show the interfaces as being 'up' without a live link?*

em0   00:90:7f:80:00:78   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em1   00:90:7f:80:00:79   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em2   00:90:7f:80:00:7a   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em3   00:90:7f:80:00:7b   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em4   00:90:7f:80:00:7c   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em5   00:90:7f:80:00:7d   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em6   00:90:7f:80:00:70   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em7   00:90:7f:80:00:71   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em8   00:90:7f:80:00:72   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em9   00:90:7f:80:00:73   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em10  00:90:7f:80:00:74   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em11  00:90:7f:80:00:75   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em12  00:90:7f:80:00:76   (up) Intel(R) PRO/1000 Network Connection 7.3.2
em13  00:90:7f:80:00:77   (up) Intel(R) PRO/1000 Network Connection 7.3.2

Do you want to set up VLANs first?

If you are not going to use VLANs, or only for optional interfaces, you should
say no here and use the webConfigurator to configure VLANs later, em4: link state changed to UP
if required.

Do you want to set up VLANs now [y|n]? n

*NOTE*  pfSense requires *AT LEAST* 1 assigned interface(s) to function.
        If you do not have *AT LEAST* 1 interfaces you CANNOT continue.

        If you do not have at least 1 *REAL* network interface card(s)
        or one interface with multiple VLANs then pfSense
        *WILL NOT* function correctly.

If you do not know the names of your interfaces, you may choose to use
auto-detection. In that case, disconnect all interfaces now before
hitting 'a' to initiate auto detection.

Enter the WAN interface name or 'a' for auto-detection: em4</intel></intel></transcend></intel></intel></intel></intel></acpi></acpi></acpi></acpi></parallel></parallel></parallel></at></power></serial></ata></ata></intel></isa></pci-isa></acpi></acpi></intel></intel></intel></intel></intel></intel></encrypt></acpi></acpi></intel(r)></intel(r)></acpi></acpi></intel(r)></intel(r)></acpi></acpi></intel(r)></intel(r)></acpi></acpi></intel(r)></intel(r)></acpi></acpi></acpi></acpi></acpi></acpi></intel(r)></intel(r)></acpi></acpi></intel(r)></intel(r)></acpi></acpi></intel(r)></intel(r)></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></software></version></version></lahf></nx,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,dca, ></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,c >

if you notice in this picture .. the interfaces include the management ports, skips the console port, but INCLUDES the usb ports as interfaces (i think?)…which is strange.

i currently have my wan link plugged into port '0' but it is actually interface em4

if you have any other things you see from the bootup output dump…please feel free to respond..especially on the ram issue! :-\

i have an sas 250gb drive in the external drive bay, but i still havent figured out how to utilize it. also, i have replaced all the fans (even in the power supplies) to quieter ones that blow enough CFM .. now the unit is quiet enough to talk over with a normal voice with the fans at 100% with the internals just slightly hotter ..just slightly.

stephenw10

Nice. :)

real memory = 8589934592 (8192 MB)
avail memory = 3664801792 (3495 MB) <– i have 8gb of ram installed, why is it ignoring the full 8gb.. non-64bit?

Exactly. Like any OS 32bit FreeBSD can only address ~4GB of RAM (3.6 in this case). It sees tha RAM is there but cannot talk to it. Use the 64bit image to address all of it. Looks like you have plenty of RAM slots too.

pci2: <encrypt decrypt,="" network="" computer="" crypto="">at device 0.0 (no driver attached)</encrypt>

This is some on-board cryptographic accelerator that doesn't appear to be supported. I expect it's a Cavium Nitrox chip of some type. Do you know what it is? If it'd removable then you should remove it (if it definitely isn't supported) as it otherwise just uses power and interrupts.

acpi_throttle0: <acpi cpu="" throttling="">on cpu0
acpi_throttle1: <acpi cpu="" throttling="">on cpu1
acpi_throttle1: failed to attach P_CNT <– what failed here?</acpi></acpi>

This is interesting. What failed is the driver controlling the CPU speed trying to attach to the CPU. What's interesting is that it didn't fail on cpu0. It's likely that it's trying to control 4 cpus independently but in reality their clock speeds are locked together such that only cpu0 is variable. FreeBSD sees 8 CPUs but I there are in fact 2 physical processors, is that 2 cores on each with hyperthreading?

if you notice in this picture .. the interfaces include the management ports, skips the console port, but INCLUDES the usb ports as interfaces (i think?)…which is strange.

i currently have my wan link plugged into port '0' but it is actually interface em4

Why do you think it's using the USB ports as interfaces? I don't see that in the log. At the end of the boot it lists only the 14 em NICs as available interfaces.

The interface numbers are determined by the order in which they are detected at boot which is in turn determined by how the OS 'walks' the PCI bus(es). What's more interesting, to me at least ;), is to look at the MAC addresses assigned to the NICs by Watchguard. They are *******70 to 7d. you might exepct 70 to be the first interface but it fact it appears to be 7c. There's nit much you an do about that other than discover which is which and write it down!

Try the LCD driver when you can. If that works then we could try to get the arm/disarm LED working.

Steve

genic

you are 100% correct on the 64bit version. i am a complete DOLT for missing that! i know better than that. 17+ years, and i put the wrong image on. what a DOLT! :o

you are correct with the cavium card as well…its in the box..but now taken out. i wasnt sure if it was supported or not, and i actually didnt catch that in the output. thanks!

the unit has two quad core xeon cpus (no hyperthreading on to my knowledge…i have not been able to get into the bios via the console..YET) which are 5140 models i believe. so it 'should' see four cores for each proc.
should i even worry about that failure on the cpu driver controlling the speed? i am not at the box at the moment, but i BELIEVE i did not see that after i loaded up the 64bit image. i shall let you know.

i figured out the interface numbering. no biggie, but i didnt think the management ports would be included. they are though…so hey...two more 1gb ports. no complaints there!

as for the LCD driver, i havent loaded that up yet, but i will and see if i can get it to work. any suggestions on which model i should pick in the LCD driver option? the older fireboxes worked fine, but i could never get the backlight to stay on 100% of the time. i would like it to be on 100% of the time so i can just walk by it, and see it without having to push a button. just my OCD at play there.

i am slowly moving stuff over to this box, but i havent tried HA failover to one of the older fireboxes (i wish i could find another one of these for around the price i got this one at..which was under 200$...) i REALLY wish that HA could be handled at a different layer than IP. that would help people who have to rely on one dhcp ip address, but give them the option of HA failover. ....if that makes sense?

thank you for the information and answers stephenw10!
now if i could just get this damn sas drive to work … i could put varnish or sometime like that on here.
does anyone have any ideas on how to utilize the internal hdd? its just a regular sas drive with a powered back plan plugged into the mainboard. i would love to utilize the space! :-\

stephenw10

@genic:

you are correct with the cavium card as well…its in the box..but now taken out. i wasnt sure if it was supported or not

You should check what card/chip it is because there may be some support an it would be useful to have if you're running any VPNs.

@genic:

i have not been able to get into the bios via the console..YET

Other Watchguard models have had console redirect for bios access disabled by default and some have it enabled but all the bios options locked down. I would expect it to be at 115200bps and you usually have to hit 'TAB', not del, to enter the setup. Is it Award or AMI?

@genic:

should i even worry about that failure on the cpu driver controlling the speed?

No. Especially not at this stage. If later on you are trying to use powerd and the CPUs are not switching speeds then perhaps it needs investigating. It may be disabled in the bios.

@genic:

as for the LCD driver, i havent loaded that up yet, but i will and see if i can get it to work. any suggestions on which model i should pick in the LCD driver option?

Well all the previous models have repliocated the LCD in the original X-Core box, presumably to simplify the Watchguard OS, so I'd start off by trying that. The sdeclcd driver that is.

@genic:

i could never get the backlight to stay on 100% of the time. i would like it to be on 100% of the time so i can just walk by it, and see it without having to push a button. just my OCD at play there.

You're in luck. Another user just recompiled the driver module with the backlight timer removed:
https://forum.pfsense.org/index.php?topic=7920.msg409215#msg409215

@genic:

i got this one at..which was under 200$…

:o Think you got a bargin there, I doubt you'll find another even close to that!

@genic:

now if i could just get this damn sas drive to work …

I'm not really familiar with SAS drives I confess but I would expect it can be made to work. Is it connected in the dmesg output above? I would first check that the disk controller is being recongnised, it may require some additional modules loading. Check the output of pciconf -lv for unclaimed devices, labelled 'none'.

Steve

stephenw10

Load of useful info in the NAR-7090 manual, here. Including the many jumper settings.
It looks like the BIOS is AMI and is accessed at 19,200bps.

Steve

genic

@stephenw10:

Load of useful info in the NAR-7090 manual, here. Including the many jumper settings.
It looks like the BIOS is AMI and is accessed at 19,200bps.

Steve

i can only connect to it @ 9600…

ill respond to the other answers you gave me above (i am completely up on *ix as i am on MS server software)

oh, i could have gotten TWO of these things for under 600$, but apparently the guy selling the used boxes got a buyer for one of them...and i snatched up the other one. it was on ebay for months..both of them.

i installed 2.1.2 64bit today (damn openssl), and got all my memory (im SUCH A DOLT!) but still nothing on the HDD. i do have 1.8gb free, but its just a 4gb cfcard. hense why i want to use the SAS drive. i will try to get into the bios to see if it is enabled....

powerd IS working..as this is was is shown on the dashboard.
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz
Current: 1737 MHz, Max: 2316 MHz
8 CPUs: 2 package(s) x 4 core(s)

thanks for all the help...more to come.

stephenw10

Cool stuff. :)
You may need to modify the BIOS to get access to it then. Obviously some risk involved with that, see the XTM8 thread.

Check that all the cores are being frequency changed. Try using:

sysctl -a | grep freq

It will show a whole load of things but included in that will be current frequency for each cpu.

It looks like in the original, un-customised, Portwell box the HD caddy is SATA. Is there additional hardware in the 1050? I couldn't really see much in the de-manufacturing docs.

Steve