Pfsense-tools missing from repository

ohmantics

I think he probably intended to say "[username]@" instead of "git@", presumably with "[username]" matching what you registered as on the portal site.

That said, like you, I signed both the ICLA and the TLA, and submitted a public key; all of this was done last night, and it all shows up on my profile on the portal site. Nevertheless, when I try to actually connect, I still get a password prompt, so it looks like there's something wrong with my key. Could somebody please clarify what format the web form expects the key to be in? I just copied the entire line from my ssh public key file, including the leading "ssh-rsa" and trailing user name. Are there any restrictions on key type or size?

I also tried my username and got a password prompt. Copying the key exactly as you describe has worked with other instances where I need to provide such a key.

bmeeks

@ohmantics:

@razzfazz:

I think he probably intended to say "[username]@" instead of "git@", presumably with "[username]" matching what you registered as on the portal site.

That said, like you, I signed both the ICLA and the TLA, and submitted a public key; all of this was done last night, and it all shows up on my profile on the portal site. Nevertheless, when I try to actually connect, I still get a password prompt, so it looks like there's something wrong with my key. Could somebody please clarify what format the web form expects the key to be in? I just copied the entire line from my ssh public key file, including the leading "ssh-rsa" and trailing user name. Are there any restrictions on key type or size?

I also tried my username and got a password prompt. Copying the key exactly as you describe has worked with other instances where I need to provide such a key.

The URL that Jeremy posted is correct and worked fine for me. I initially had some problems with the git setup on my local workstation. The first thing you need to verify is that you can correctly authenticate to this URL from a bash prompt in your git installation.

ssh -T git@github.com

Until that correctly authenticates you, the other URL is not going to work either. My problem on Windows 7 was the ssh_agent was not running. Manually starting it fixed the problem. You can then configure it to automatically start with each git session.

There is a Help page on the Github site detailing how to setup SSH keys. Here is the link I used: https://help.github.com/articles/generating-ssh-keys

You can also run this command to print more detailed troubleshooting information

ssh -Tv git@git.pfsense.org

… or run the same command against the base git@github.com URL. If you run the test against the git@git.pfsense.org URL, it will say during the output that "Authentication succeeded". You won't actually get a shell prompt because that is disabled, but you should see that it authenticates your ID. If it fails to authenticate, you will hopefully find out why by inspecting the detailed output.

ohmantics

@bmeeks:

@ohmantics:

@razzfazz:

I think he probably intended to say "[username]@" instead of "git@", presumably with "[username]" matching what you registered as on the portal site.

That said, like you, I signed both the ICLA and the TLA, and submitted a public key; all of this was done last night, and it all shows up on my profile on the portal site. Nevertheless, when I try to actually connect, I still get a password prompt, so it looks like there's something wrong with my key. Could somebody please clarify what format the web form expects the key to be in? I just copied the entire line from my ssh public key file, including the leading "ssh-rsa" and trailing user name. Are there any restrictions on key type or size?

I also tried my username and got a password prompt. Copying the key exactly as you describe has worked with other instances where I need to provide such a key.

The URL that Jeremy posted is correct and worked fine for me. I initially had some problems with the git setup on my local workstation. The first thing you need to verify is that you can correctly authenticate to this URL from a bash prompt in your git installation.
ssh -T git@github.com
Until that correctly authenticates you, the other URL is not going to work either. My problem on Windows 7 was the ssh_agent was not running. Manually starting it fixed the problem. You can then configure it to automatically start with each git session.

There is a Help page on the Github site detailing how to setup SSH keys. Here is the link I used: https://help.github.com/articles/generating-ssh-keys

You can also run this command to print more detailed troubleshooting information
ssh -Tv git@git.pfsense.org
… or run the same command against the base git@github.com URL. If you run the test against the git@git.pfsense.org URL, it will say during the output that "Authentication succeeded". You won't actually get a shell prompt because that is disabled, but you should see that it authenticates your ID. If it fails to authenticate, you will hopefully find out why by inspecting the detailed output.

Thanks for the detailed walkthrough. I've used ssh keys with other sites just fine. ssh -Tv says


debug1: Authentication succeeded (public key).
Authenticated to git.pfsense.org ([208.123.73.74]:22).

For the originally provided command, "git clone git@git.pfsense.org/pfsense-tools" I get:


fatal: repository 'git@git.pfsense.org/pfsense-tools' does not exist

Which is why I prepended ssh:// and tried a few other things.

With "git clone ssh://git@git.pfsense.org/pfsense-tools", I get:


fatal: '/pfsense-tools' does not appear to be a git repository
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

razzfazz

@bmeeks:

The URL that Jeremy posted is correct and worked fine for me.

I'm pretty sure there should either be a colon between the host name and the path ("git@git.pfsense.org**:**/pfsense-tools") or a protocol prefix to make it a proper URL.

In any case, I, too, get successful authentication via ssh ("fatal: Interactive git shell is not enabled."), but "repository not found" errors when using git.

bmeeks

@razzfazz:

@bmeeks:

The URL that Jeremy posted is correct and worked fine for me.

I'm pretty sure there should either be a colon between the host name and the path ("git@git.pfsense.org**:**/pfsense-tools") or a protocol prefix to make it a proper URL.

In any case, I, too, get successful authentication via ssh ("fatal: Interactive git shell is not enabled."), but "repository not found" errors when using git.

You are correct. My bad in not noticing Jeremy's URL was not 100% correct. I looked at it too fast… :-[

Here is the correct one:

[code]git clone git@git.pfsense.org:pfsense-tools tools.git

You can replace the tools.git part with whatever you want your local copy of the repository to be named. This exact command worked for me this morning. It does take about 5 minutes for the SSH keys to replicate from one server to the other, but I assume that should have happened by now.

Bill

razzfazz

Ah, so it's a relative path. Poking around a bit, it looks like the full path is /git/pfsense-tools[.git]; both of the following do work for me:


git clone git@git.pfsense.org:/git/pfsense-tools.git
git clone ssh://git@git.pfsense.org/git/pfsense-tools.git

kpa

I just signed the ICLA and the TLA and I pasted my SSH public key to the field reserved for it. However I'm using a DSS key instead of the standard RSA key and it looks like the web interface is truncating my key. Do I really have create a new RSA key just for this purpose?

kpa

@kpa:

I just signed the ICLA and the TLA and I pasted my SSH public key to the field reserved for it. However I'm using a DSS key instead of the standard RSA key and it looks like the web interface is truncating my key. Do I really have create a new RSA key just for this purpose?

I got it working with a new RSA key and the web interface didn't truncate it this time. Please fix it so that people can use their existing DSS keys, thanks in advance.

jdillard

kpa, what was the total length of your DSS key? Do you know if it may have copied newlines in with it?

kpa

I copy/pasted both keys the same way by using pbcopy on my macbook and pasting the keys with cmd-V to the input box, only the RSA key didn't get truncated. I'm sure there weren't any newlines. The DSA public key file is 617 characters long and the RSA public key file is 409 characters.

Guest

Jeremy just patched things up to handle up to 1K char keys.

MindfulCoyote

@gonzopancho:

Jeremy just patched things up to handle up to 1K char keys.

I'm having some trouble too. My key is 395 bytes total, but it keeps getting truncated to 256 bytes on the profile page.

wc -lc .ssh/id_rsa.pub

1 395 .ssh/id_rsa.pub

ssh-keygen -v -lf .ssh/id_rsa.pub

2048 d8:ea:18:bb:4c:0e:24:81:2c:3a:50:39:7a:d1:22:20 mindfulcoyote (RSA)
+–[ RSA 2048]–--+
|E .o |
|=.= . |
|=+ + |
|=.. o |
|+.. . S |
| + . |
| . o . |
| = = |
| *.. |
+-----------------+

Here's what I paste:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDTYaQ2wNz6fh7cB/NNpYhT07IuDRtGc5QPWqH+1o3kNy3rR4O/gxk4bWC/F7ccWrfeHfzjJWdwrOFc/9OuOdWEVM2NqZb7vqZqWx1wA18ELwnNWKSYpC9lkz+ElMI7F1maGcLDCAwsjT/c/EZV68I3mk+TWZ9KS0Vue1GoxbPR8i7aC5xaln+Y2SYjhpjeIEGDFiKfKEQerQ3ymXZ/OqGPlr/YI9X0Mr7/ypZfXkZrbkAcHK/vFejnD5BL7QA1YmPnaS2HTdKfRcga5rkjWTOKMpQCHdfASPCaC5TilfZcOJpQsXSrcl17ncB66zUZ9bexT4YSsQxXGHFJHY93Z50/ mindfulcoyote

Here's what comes back after saving:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDTYaQ2wNz6fh7cB/NNpYhT07IuDRtGc5QPWqH+1o3kNy3rR4O/gxk4bWC/F7ccWrfeHfzjJWdwrOFc/9OuOdWEVM2NqZb7vqZqWx1wA18ELwnNWKSYpC9lkz+ElMI7F1maGcLDCAwsjT/c/EZV68I3mk+TWZ9KS0Vue1GoxbPR8i7aC5xaln+Y2SYjhpjeIEGDFiKfKEQerQ3ymXZ/OqGPlr/

No line feeds or carriage returns. The only white space is after ssh-rsa and between the key and the name at the end.
Any tips? Are we supposed to paste just the fingerprint? Or add a newline every 76 characters?

jdillard

There was a database corruption issue. If your key isn't working please re-enter it as it should work now.

MindfulCoyote

@jdillard:

There was a database corruption issue. If your key isn't working please re-enter it as it should work now.

Oh sorry, I'd better stop uploading buffer overruns. ;D j/k!

razzfazz

Still can't seem to access the tools repo. portal.pfsense.org seems down, too?!

dreamcat4

@jdillard:

There was a database corruption issue. If your key isn't working please re-enter it as it should work now.

Nope. Didn't work. pfsense server still fails to authenticate.

jporter

https://forum.pfsense.org/index.php?topic=79413.0

Repo access is currently intermittent, until we get it fixed. Updating your key, will fix it until it breaks again.

dreamcat4

@jporter:

https://forum.pfsense.org/index.php?topic=79413.0

Repo access is currently intermittent, until we get it fixed. Updating your key, will fix it until it breaks again.

Ah OK. Thanks for this infos. Actually, I had updated my key about 10 or 20 times and it never worked once. But hey. Ever considered putting it up on Github? Hahaha. They don't have such reliability problems over there.

No but seriously, you can have private Github repositories too! Maybe there is a too low restriction for the number of users however. There is Bitbucket too.

Guest

Being insulting doesn't help