Problem DNS - LAN
-
Hello thanks for the help but it does not work
On the DNS Forwarder I set the same values that you have set
On the General Setup what should I set?
I have to make the rules on the firewall?
Hello
-
Out of the box the default rules would be any any for the first lan interface.. If you add an OPT1 interface - say this 192.168.99 segment.. Then you would have to create rules on that interface to allow the traffic you want.
So in the attached you will see the firewall rules for my dmz segment. 192.168.3.0/24 in my case - this would be sim to your 192.168.99 segment
In my rules I allow traffic from the dmz segment to talk to my ntp server on my lan segment 192.168.1.0/24.. I allow traffic to my pfsense interface in that segment - in my case 192.168.3.253 for dns. And I allow traffic not going to the local networks, ie my lan and wlan segments..
What are you firewall rules on your segment? And validate that pfsense is listening on that interfaces IP for dns forwarding. Simple netstat should show it.
[2.1.2-RELEASE][root@pfsense.local.lan]/root(3): netstat -an | grep .53
tcp6 0 0 *.53 . LISTEN
tcp4 0 0 *.53 . LISTEN
udp6 0 0 *.53 .
udp4 0 0 *.53 .So you can see *.53 here this means its listening on ALL IPs that pfsense has..
So you can see a computer on that network can query pfsense for dns - which in turn goes and asks the dns server setup on it.
-
hello guys
I have problem with DNS, I have DHCP server on pfsense and my domain users can obtain from it,I have configured DNS server on DC also Microsoft Radius server for captive portal and DNS forwarder configured on pf,but now users when enter URL (e.g www.google.com) dns problem occur ,but when they enter 8.8.8.8 in Address Bar it opens the captive portal logon page and after authentication it brings the page.
any suggestion? -
Hello johnpoz
I tried to run the command
netstat-an | grep .53but with the keyboard that I can not seem to do |
I do not know how to fix this DNS?
I did the command NSLOOKUP from a client on the LAN and I have results similar to yours except that there 's IP address of my pfSense
help help
-
If you did a nslookup and get the results like mine - then your dns is working..
So what exactly do you think is not working? And what kind of keyboard does not do | – normal keyboard it would same key as \ above your enter/return key -- and you don't really need to do that part - thats just so you don't get a full listing.. You could do just netstat -an
You know you could of just copied and pasted my command, etc. Did you fall off the turnip truck yesterday?
-
Hello I decided to reset the machine pfSense and start from scratch to figure out where the problem is
-
So that was 30 minutes ago.. You should be up and running already, it takes all of like 5 minutes to get pfsense up and running from scratch.. Unless your dicking with something - the default settings would have you up and running with dns, dhcp bing bang zoom.
-
Hello I have noticed one thing on my LAN, excluding pfSense I have this situation:
-
If I put a PC in DHCP and DNS worthless router assigns me an IP address because the DHCP is enabled on the router and DNS as I 212 216 112 112 who are my ISP's DNS, and in this situation I go on the internet no problem
-
If I put a pc and I go to set the IP address without DNS but I do not surf on the internet
Now I'm redoing the pfSense machine and reboot from scratch and slowly we see that the problems I
-
-
"- If I put a pc and I go to set the IP address without DNS but I do not surf on the internet"
How exactly do you think you can surf the internet without dns?? So duh!! if you don't set dns internet wouldn't work.
-
Hello
I installed pfSense from scratch and I saw that there was a mistake when I went to set the LAN card on pfSense, in fact, put the Gateway, and it would not let me run anything …. in fact if I went on Status - Gateway I Gateway is the the WAN to the LAN, the LAN I deleted that everything works now via DNS Forwarder can block facebook
Hello and thanks to all
