Intel 82598EB CX4 "no carrier"
-
We have an Intel 82598EB CX4 10gbe card. This card loads fine in FREENAS 8 (also freebsd based) and Windows 2008. In PFSENSE 2.0.1-RELEASE (amd64)
built on Mon Dec 12 18:16:13 EST 2011 the card gets a link light and so does the switch. Unfortunately the card will not come up and I always get "no carrier"Output from pciconf -lv
ix0@pci0:5:0:0: class=0x020000 card=0xaf8015d9 chip=0x10dd8086 rev=0x01 hdr=0x00
class = network
subclass = ethernet
ix1@pci0:5:0:1: class=0x020000 card=0xaf8015d9 chip=0x10dd8086 rev=0x01 hdr=0x00
class = network
subclass = ethernetOutput from ifconfig
ix0: flags=8802 <broadcast,simplex,multicast>metric 0 mtu 1500
options=5bb <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,tso4,lro>ether 00:25:90:65:e0:34
media: Ethernet autoselect
status: no carrierHave tried adjusting kern.ipc.nmbclusters as recommended in other threads but that has no effect.
Anyone have any ideas?</rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,tso4,lro></broadcast,simplex,multicast>
-
pfSense 2.0.1-RELEASE is based on FreeBSD 8.1. I suggest you try a snapshot build of pfSense 2.1 which is based on FreeBSD 8.3 and therefore has more up to date drivers than pfSense 2.0.1
-
Update: There was another NIC in the machine which had failed and was preventing the 10GBE card from being recognized. All is normal now.
-
Hello fannet,
I've had the same issue with the same card ( http://forum.pfsense.org/index.php/topic,31590.0.html ) but never managed to get it to work but it was 2 years ago.
What did you do to solve the issue ?
Best,
-
It was detected during install after the conflicting NIC was removed.