Watchguard XTM 5 Series
-
@lolman
You have to use the 3.XX series on the XTM5 bios. I believe the 4.XX is for UEFI bios only. I started out using 3.43 but that mostly corrupted the BIOS image! Using 3.51 allowed me to edit the Superio tables and didn't corrupt the BIOS.@mcdonnjd
Which model XTM5 do you have? It seems like it's different to those the rest of have so maybe it's one of the second generation models.Steve
-
@mcdonnjd
Which model XTM5 do you have? It seems like it's different to those the rest of have so maybe it's one of the second generation models.Steve
I was hoping you'd be the one responding as you seem to know a heck of a lot about these units. I just upped the memory to a pair of 2GB sticks and a Core2 Duo (E6550) @ 2.33GHz, though I'm thinking of downgrading one of the Core2 Quad (IRRC 3.0GHz) PCs down to a Core2 Duo once I check one to see what socket it is using.
I'm thinking I might have a different model, a later generation perhaps as I have 2 SATA power connectors on my PSU. I took some pics last night that I can post if needed. The BIOS version reported by the LCD and on the console match what you posted and I believe it's the same motherboard model, though I'd have to open it up (or check my pictures) again to be sure as I can't remember now.
On the back of it, it's a very generic XTM 5 Series and XTM 510. I don't see anything about revisions or anything to make it easy. If there's something you want me to look for or try, let me know.
Currently idling in the BIOS at 39 degrees on the CPU with the Core2 Duo. Didn't check what it was at before on the Celeron, though I only had it on at home in the living room before where it was much warmer than the server room at work. Doesn't sound like the fans are running loud either which is nice, though I can't really be sure they aren't as there's a ton of wind noise in this room already. Vcore is fluctuating at 1.319-1.334, I haven't looked up yet to see if that's in spec or not yet.
EDIT>>
I missed the label on the bottom of the chassis, Model #: NC2AE8.Also, do you think that either http://www.newegg.com/Product/Product.aspx?Item=N82E16811994023 or http://www.newegg.com/Product/Product.aspx?Item=N82E16817997007 would fit nicely inside so I could have a RAID-1 hard drive setup? They both probably would fit with some modifications, but curious if anyone things they would fit without having to do any work to them.
-
Hmm. Ok well the 510 is a 1st gen model. You have the same version of flashrom as everyone else, v0.9.5.2-r1515. And it looks like you're running 32bit, yes?
My box, which happens to be sat open beside me :), is also marked NC2AE8. It is also marked on the PCB 'MB-7580 W V1.0 C' and it has a small square sticker near the BIOS rom chip marked 'MB-7580 CK:9A80 2010-02-03'. The date in particular would be interesting if yours is newer.
It is possible to read the details from the BIOS rom chip if you look closely with a light (and possibly a magnifying glass!). The chip is labelled on the PCB as U34 and is immediately adjacent to a 10pin header labelled SPI-ROM1 (which is what I'm connected to in this picture)
The ROM chip in my box is marked: '25P80VG, 78227 VZ, PHL 0314' with the ST Microelectronics logo. Which agrees with what flashrom is saying:
Found ST flash chip "M25P80" (1024 kB, SPI) at physical address 0xfff00000.
Careful when putting in more powerful CPUs. The XTM5 has a smaller PSU than the standard Lanner box it's based on. Though yours is different.
Steve
-
Hmm. Ok well the 510 is a 1st gen model. You have the same version of flashrom as everyone else, v0.9.5.2-r1515. And it looks like you're running 32bit, yes?
Perhaps they made small changes without changing the model. It does happen, sometimes even entire chipsets get changed though they keep the same model number and revision. (Which thankfully isn't too common, but more common than it should be.)
My box, which happens to be sat open beside me :), is also marked NC2AE8. It is also marked on the PCB 'MB-7580 W V1.0 C' and it has a small square sticker near the BIOS rom chip marked 'MB-7580 CK:9A80 2010-02-03'. The date in particular would be interesting if yours is newer.
The PCB is stamped 'MB-7580 W V1.0' and the sticker is marked 'MB-7580W CK: 9880 2010-02-03'. There is also a small sticker labeled '686, AMIBIOS, C1999, YK12, 2061' that you can see in the picture.
It is possible to read the details from the BIOS rom chip if you look closely with a light (and possibly a magnifying glass!). The chip is labelled on the PCB as U34 and is immediately adjacent to a 10pin header labelled SPI-ROM1
The ROM chip in my box is marked: '25P80VG, 78227 VZ, PHL 0314' with the ST Microelectronics logo. Which agrees with what flashrom is saying:
Found ST flash chip "M25P80" (1024 kB, SPI) at physical address 0xfff00000.
Man, that is one tiny chip! Whatever happened to the nice larger BIOS chips with sockets for hot flashing and such? Those were so much nicer. lol
Anyway, the U34 chip is labeled as '25P80VG, GHAAM V5, CHN 643B' (or CHN6438, not sure, looks more like a B to me) and then the ST logo and something inside a circle that my eyes are going buggy trying to read without a microscope… I'm not sure what the white on the corner of the chip is, but it doesn't seem to be something on top as it doesn't seem to come off.
Careful when putting in more powerful CPUs. The XTM5 has a smaller PSU than the standard Lanner box it's based on. Though yours is different.
Steve
I put the Quad Core2 chip in and seem to be idling in the BIOS around 55 degrees with a lower Vcore voltage. Once I get this up and running a bit more, I'll stress test it to make sure that it won't overheat. I've already looked up some higher capacity fans on Newegg if needed. Worst case scenario with the power supply not being able to handle it, would be an unstable system correct? There's also the chance of the power supply going, but I think an unstable system that's hard to diagnose as to what's causing it to be more worse case than a dead power supply that can be replaced.
My power supply is labeled as Model: ST-220FUB-05E with total power being marked as 220W although also marked as Max 204W… Ahh, the Max is for the 204W max on the +3.3V, +5V, and +12V buses and then the 16W Max for the -12V and +5VSB buses for the 220W total max.
EDIT>>
It seems it deleted all my comments and only posted the picture, one moment while I type it all back up...
Ok, I think that I answered everything and left all the comments I did before.
-
Hmm, I would have expected it to be a different chip. Like completely different, perhaps double the size as was often the case with the old style removable chips. Odd the flashrom doesn't see it. You are running it from root I assume?
You could try a 2.2 snapshot which will have a newer flashrom.
Steve
-
You could try a 2.2 snapshot which will have a newer flashrom.
SteveWhen I tried several weeks ago there appeared to be no flashrom under 2.2… Ill give it a try again to verify.
-
Hmm yes, I was forgetting no pkg_add etc in 2.2. Haven't explored the options here. Just add a pbi repo? Point at PC-BSD 10?
Steve
-
Hmm yes, I was forgetting no pkg_add etc in 2.2. Haven't explored the options here. Just add a pbi repo? Point at PC-BSD 10?
Steve
I took a quick look yesterday and looked again today, but I'm not seeing how to do this. If you could kindly point me in the right direction, I'll give this a try. Seems like all I'm finding are people talking about how repo's broke with 2.1 or something, but not seeing how to actually set it up. I'm guessing I'm just not using the right search terms.
-
Hmm, this is far more trouble than I expected. I'm probably just missing something. There seems to be no easy way of adding flashrom (or anything else) to 2.2. More research needed. ;)
Looks like you might be able to use the PC-BSD PBIs but since 10 they are 64bit only. :-\
pbi_add -r http://pbi.cdn.pcbsd.org/sysutils/flashrom/10/x64/flashrom-0.9.7_1-amd64.pbi
No good for 32bit installs, which mine is. :(
Edit: Though you can do that you shouldn't. Use the pkg command instead see below.
Steve
-
Hmm, this is far more trouble than I expected. I'm probably just missing something. There seems to be no easy way of adding flashrom (or anything else) to 2.2. More research needed. ;)
Looks like you might be able to use the PC-BSD PBIs but since 10 they are 64bit only. :-\
pbi_add -r http://pbi.cdn.pcbsd.org/sysutils/flashrom/10/x64/flashrom-0.9.7_1-amd64.pbi
No good for 32bit installs, which mine is. :(
Steve
Heh, tried to quote the message, but my phone decided to thank you instead.
Anyway, is there a DOS utility that can flash the BIOS on this perhaps? I can try loading up FreeDOS on the CF card and flashing the BIOS that way. I'd imagine this is possible as almost everyone still provides ways to flash via DOS. (HP is great with this as you can PXE boot an image with a bunch of different BIOSes and the machine automatically figures out which one is for that machine and the program can be signed with the BIOS password so no interaction is required.)
-
Thank your phone for me. ;D
There are DOS programs for doing this yes. AFUDOS I believe is the program you'd need. The problem is that these dos based tools still use some sort of graphical mode, albeit a crude one, which cannot be displayed via the serial console. To work around that you need to feed it a command line that by-passes all the user input such as we did with the X-e boxes, see:
https://doc.pfsense.org/index.php/PfSense_on_Watchguard_Firebox#Flashing_the_BIOSI've just tried and failed to get FreeDOS to boot to the console. I'm sure I've done it before though. :-\
Steve
-
Thank your phone for me. ;D
There are DOS programs for doing this yes. AFUDOS I believe is the program you'd need. The problem is that these dos based tools still use some sort of graphical mode, albeit a crude one, which cannot be displayed via the serial console. To work around that you need to feed it a command line that by-passes all the user input such as we did with the X-e boxes, see:
https://doc.pfsense.org/index.php/PfSense_on_Watchguard_Firebox#Flashing_the_BIOSI've just tried and failed to get FreeDOS to boot to the console. I'm sure I've done it before though. :-\
Steve
I tried one of your FreeDOS images from one of the other watchguard threads and never got the 3 beeps. Looking at the CF card though, it doesn't look like everything copied over. And now I can't seem to repartition my card back to 1GB from 16MB, so I've not tried the 64bit 2.2 yet. I need a female to female adapter for the PCI-Express slot so I can toss a video card on it. (And later, hopefully a supported crypto card.)
Would doing the pain in the butt SPI work? I'd have to hack together a cable for it and all, but if that's what I have to do, that's what I have to do.
I think I'll try playing around with trying to get FreeDOS working for now though.Or maybe a Linux distro with flashrom. Plenty of things to try. Might need to run to the store for a new CF card though. Newegg needs a local store in my middle of nowhere town… Lol
EDIT>>
Well, I got 2.2 up and running, and got the flashrom pbi installed, but it still gives the same error about no EEPROM/flash device found. Guess I'll have to try some Linux or DOS. -
The SPI header may work but I see no reason why flashrom should recognise your chip via that rather than the internal method, which is also using SPI.
I updated my box to 64bit which you can do via the normal firmware update just change the updater URL. It is possible to install the flashrom PBI from PC-BSD as I outlined above but it seems very 'wrong'.
Edit: It IS wrong don't do it, see below.
You cannot install the PBI directly you must fetch it first. You must disable the signature check. Then when it's installed you must call it using the full path it does not seem to integrate in any useful way even after a rehash.[2.2-ALPHA][root@pfsense.localdomain]/tmp(8): fetch http://pbi.cdn.pcbsd.org/sysutils/flashrom/10/x64/flashrom-0.9.7_1-amd64.pbi flashrom-0.9.7_1-amd64.pbi 100% of 5349 kB 1999 kBps 00m03s [2.2-ALPHA][root@pfsense.localdomain]/tmp(9): pbi_add -i flashrom-0.9.7_1-amd64.pbi PBI Information for: flashrom-0.9.7_1-amd64 ----------------------------------------------------- Name: flashrom RootInstall: NO Version: 0.9.7_1 Built: 20140206 190737 Prefix: /usr/pbi/flashrom-amd64 Author: flashrom Team Website: http://www.flashrom.org/ Arch: amd64 FbsdVer: 10.0-RELEASE CreatorVer: 1.0 ArchiveCount: 648 ArchiveSum: e22c43317551cb41703add247953ccbeb277957f9444003d09586ec22aa67f9a Signature: Bad License: GPLv2 AutoUpdate: NO [2.2-ALPHA][root@pfsense.localdomain]/tmp(12): pbi_add --no-checksig flashrom-0.9.7_1-amd64.pbi Verifying Checksum...OK Extracting to: /usr/pbi/flashrom-amd64 Installed: flashrom-0.9.7_1 [2.2-ALPHA][root@pfsense.localdomain]/tmp(14): rehash [2.2-ALPHA][root@pfsense.localdomain]/tmp(15): flashrom flashrom: Command not found. [2.2-ALPHA][root@pfsense.localdomain]/tmp(18): /usr/pbi/bin/flashrom -p internal flashrom v0.9.7-r1711 on FreeBSD 10.0-STABLE (amd64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel ICH7/ICH7R". Enabling flash write... OK. Found Micron/Numonyx/ST flash chip "M25P80" (1024 kB, SPI) at physical address 0xfff00000. No operations were specified.
If you choose to use this method I would definitely recommend reinstalling afterwards or at least switching to the other slice if you're running Nano.Just don't!Steve
-
The SPI header may work but I see no reason why flashrom should recognise your chip via that rather than the internal method, which is also using SPI.
I updated my box to 64bit which you can do via the normal firmware update just change the updater URL. It is possible to install the flashrom PBI from PC-BSD as I outlined above but it seems very 'wrong'.
You cannot install the PBI directly you must fetch it first. You must disable the signature check. Then when it's installed you must call it using the full path it does not seem to integrate in any useful way even after a rehash.
[2.2-ALPHA][root@pfsense.localdomain]/tmp(8): fetch http://pbi.cdn.pcbsd.org/sysutils/flashrom/10/x64/flashrom-0.9.7_1-amd64.pbi flashrom-0.9.7_1-amd64.pbi 100% of 5349 kB 1999 kBps 00m03s [2.2-ALPHA][root@pfsense.localdomain]/tmp(9): pbi_add -i flashrom-0.9.7_1-amd64.pbi PBI Information for: flashrom-0.9.7_1-amd64 ----------------------------------------------------- Name: flashrom RootInstall: NO Version: 0.9.7_1 Built: 20140206 190737 Prefix: /usr/pbi/flashrom-amd64 Author: flashrom Team Website: http://www.flashrom.org/ Arch: amd64 FbsdVer: 10.0-RELEASE CreatorVer: 1.0 ArchiveCount: 648 ArchiveSum: e22c43317551cb41703add247953ccbeb277957f9444003d09586ec22aa67f9a Signature: Bad License: GPLv2 AutoUpdate: NO [2.2-ALPHA][root@pfsense.localdomain]/tmp(12): pbi_add --no-checksig flashrom-0.9.7_1-amd64.pbi Verifying Checksum...OK Extracting to: /usr/pbi/flashrom-amd64 Installed: flashrom-0.9.7_1 [2.2-ALPHA][root@pfsense.localdomain]/tmp(14): rehash [2.2-ALPHA][root@pfsense.localdomain]/tmp(15): flashrom flashrom: Command not found. [2.2-ALPHA][root@pfsense.localdomain]/tmp(18): /usr/pbi/bin/flashrom -p internal flashrom v0.9.7-r1711 on FreeBSD 10.0-STABLE (amd64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel ICH7/ICH7R". Enabling flash write... OK. Found Micron/Numonyx/ST flash chip "M25P80" (1024 kB, SPI) at physical address 0xfff00000. No operations were specified.
If you choose to use this method I would definitely recommend reinstalling afterwards or at least switching to the other slice if you're running Nano.
Steve
As I said, I got 2.2 installed and flashrom installed as well, but it still did not work. I then tried a couple different ways of getting FreeDOS booted, but none of them seemed to work. I'm putting 2.1.3 back on the CF card now and going to get it configured and then make a backup of it so I can stop having to go through the setup every time after trying something different.
Out of curiosity, do you have a jumper on J10? Mine doesn't have one. J11 seems required to be able to turn on, and J2 was on pins 2&3. J14 has no jumper across any of the 3 pins. Is this the same as what you have there?
-
Ah, sorry I missed your edit.
Yep, my jumpers set the same. It's interesting that J11 has a jumper because the default is n/c where as J19 should be shorted by default but isn't on my box. Those three jumpers select AT or ATX mode. J2 selects master or slave for the CF card slot. That's based on the 7581which is slightly different.Steve
-
Ok using PBIs is not the way to go. The old package system has been replaced with pkgng. See:
https://forum.pfsense.org/index.php?topic=77166.0
It's easy enough to install flashrom but it takes a long time in Nano while it updates the package list.[2.2-ALPHA][root@pfsense.localdomain]/root(3): pkg The package management tool is not yet installed on your system. Do you want to fetch and install it now? [y/N]: y Bootstrapping pkg from pkg+http://pkg.FreeBSD.org/freebsd:10:x86:32/latest, please wait... Verifying signature with trusted certificate pkg.freebsd.org.2013102301... done Installing pkg-1.2.7_2... done If you are upgrading from the old package format, first run: # pkg2ng Usage: pkg [-v] [-d] [-l] [-N] [-j <jail name="" or="" id="">|-c <chroot path="">] [-C <configuration file="">] [-R <repo config="" dir="">] <command></command> [<args>] Global options supported: -d Increment debug level -j Execute pkg(8) inside a jail(8) -c Execute pkg(8) inside a chroot(8) -C Use the specified configuration file -R Directory to search for individual repository configurations -l List available commands and exit -v Display pkg(8) version -N Test if pkg(8) is activated and avoid auto-activation Commands supported: add Registers a package and installs it on the system annotate Add, modify or delete tag-value style annotations on packages audit Reports vulnerable packages autoremove Removes orphan packages backup Backs-up and restores the local package database check Checks for missing dependencies and database consistency clean Cleans old packages from the cache config Display the value of the configuration options convert Convert database from/to pkgng create Creates software package distributions delete Deletes packages from the database and the system fetch Fetches packages from a remote repository help Displays help information info Displays information about installed packages install Installs packages from remote package repositories lock Locks package against modifications or deletion plugins Manages plugins and displays information about plugins query Queries information about installed packages register Registers a package into the local database remove Deletes packages from the database and the system repo Creates a package repository catalogue rquery Queries information in repository catalogues search Performs a search of package repository catalogues set Modifies information about packages in the local database ssh ssh packages to be used via ssh shell Opens a debug shell shlib Displays which packages link against a specific shared library stats Displays package database statistics unlock Unlocks a package, allowing modification or deletion update Updates package repository catalogues updating Displays UPDATING information for a package upgrade Performs upgrades of packaged software distributions version Displays the versions of installed packages which Displays which package installed a specific file Commands provided by plugins: For more information on the different commands see 'pkg help <command></command>'. [2.2-ALPHA][root@pfsense.localdomain]/root(4): pkg add flashrom pkg: flashrom: No such file or directory pkg: Was 'pkg install flashrom' meant? Failed to install the following 1 package(s): flashrom [2.2-ALPHA][root@pfsense.localdomain]/root(5): pkg install flashrom Updating repository catalogue digests.txz 100% 1070KB 1.0MB/s 1.0MB/s 00:01 packagesite.txz 100% 4908KB 2.4MB/s 1.4MB/s 00:02 Incremental update completed, 22923 packages processed: 0 packages updated, 0 removed and 22923 added. The following 5 packages will be installed: Installing dmidecode: 2.12 Installing pciids: 20140502 Installing libftdi: 0.20_1 Installing libpci: 3.2.1 Installing flashrom: 0.9.7_1 The installation will require 3 MB more space 612 KB to be downloaded Proceed with installing packages [y/N]: y dmidecode-2.12.txz 100% 60KB 59.9KB/s 59.9KB/s 00:00 pciids-20140502.txz 100% 180KB 180.1KB/s 180.1KB/s 00:00 libftdi-0.20_1.txz 100% 41KB 41.3KB/s 41.3KB/s 00:00 libpci-3.2.1.txz 100% 44KB 43.9KB/s 43.9KB/s 00:00 flashrom-0.9.7_1.txz 100% 287KB 286.9KB/s 286.9KB/s 00:00 Checking integrity... done [1/5] Installing dmidecode-2.12... done [2/5] Installing pciids-20140502... done [3/5] Installing libftdi-0.20_1... done [4/5] Installing libpci-3.2.1... done [5/5] Installing flashrom-0.9.7_1... done [2.2-ALPHA][root@pfsense.localdomain]/root(6): flashrom flashrom: Command not found. [2.2-ALPHA][root@pfsense.localdomain]/root(7): rehash [2.2-ALPHA][root@pfsense.localdomain]/root(8): flashrom flashrom v0.9.7-r1711 on FreeBSD 10.0-STABLE (i386) flashrom is free software, get the source code at http://www.flashrom.org Please select a programmer with the --programmer parameter. Previously this was not necessary because there was a default set. To choose the mainboard of this computer use 'internal'. Valid choices are: internal, dummy, nic3com, nicrealtek, gfxnvidia, drkaiser, satasii, ft2232_spi, serprog, rayer_spi, pony_spi, nicintel, nicintel_spi, ogp_spi, satamv, usbblaster_spi. [2.2-ALPHA][root@pfsense.localdomain]/root(9): flashrom -p internal flashrom v0.9.7-r1711 on FreeBSD 10.0-STABLE (i386) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel ICH7/ICH7R". Enabling flash write... OK. Found Micron/Numonyx/ST flash chip "M25P80" (1024 kB, SPI) at physical address 0xfff00000. No operations were specified.</args></repo></configuration></chroot></jail>
John, did you try to access the BIOS rom before you changed the CPU? IT's about the only thing your system has different to anyone else's.
Also it's not necessary to change the BIOS anyway. ;)Steve
-
I think I did, but I can't remember. I'll try putting the Celeron back in tomorrow.
-
It works fine with my Core2duo in there. Maybe the Quad core shifts some I/O resources or similar. :-\
Steve
-
It works fine with my Core2duo in there. Maybe the Quad core shifts some I/O resources or similar. :-\
Steve
Just tried again with the original CPU and RAM and still getting this:
[2.1.3-RELEASE][root@pfSense.gorgarath.net]/root(2): /etc/rc.conf_mount_rw [2.1.3-RELEASE][root@pfSense.gorgarath.net]/root(3): flashrom -r og-bios.rom flashrom v0.9.5.2-r1515 on FreeBSD 8.3-RELEASE-p16 (i386), built with libpci 3.1.9, GCC 4.2.1 20070719 [FreeBSD], little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel ICH7/ICH7R". Enabling flash write... OK. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically.
On bootup, the console shows this: "MB-7580 Ver.WC0 02/03/2010". Does that match what yours shows?
-
Yep:
AMIBIOS(C)2006 American Megatrends, Inc. MB-7580 Ver.WC0 02/03/2010 Unlocked V1.8 SW CPU : Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz Speed : 2.20 GHz Press DEL to run Setup (F4 on Remote Keyboard) Press n if you want to boot from the network Press F11 for BBS POPUP (F3 on Remote Keyboard) The MCH is operating with DDR2 800 DRAM Timing: Tcl:6/Tras:18/Trp:6/Trcd:6/Twr:6/Trfc:52/Twtr:3/Trrd:3/Trtp:3 Initializing USB Controllers .. Done.
Except of course I have modified the boot message. ;)
Say for some reason the I/O addess of your chip has been shifted, that might mean that accessing it via the SPI header would work. Seems more likely it's a new IC variant that flashrom doesn't recognise though.
Steve