Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Problem after installation

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    11 Posts 2 Posters 1.9k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S Offline
      stephenw10 Netgate Administrator
      last edited by

      Where exactly does it fail to boot?

      What sort of drive are you booting from?

      Steve

      1 Reply Last reply Reply Quote 0
      • M Offline
        Mikk
        last edited by

        F1 pfSense

        F6 PXE
        Boot: F1
        |

        … and that's all.

        There is 120GB Maxtor DiamondMax Plus 9 Primary IDE in moment, but just in case I tried Hitachi Deskstar before and problem was the same.

        Mikk

        1 Reply Last reply Reply Quote 0
        • stephenw10S Offline
          stephenw10 Netgate Administrator
          last edited by

          Ok so it looks like it's hanging at the 'spinner' trying to load the kernel.

          I take it, since you mentioned LBA mode, that you've read this:
          https://doc.pfsense.org/index.php/Boot_Troubleshooting#BIOS.2FDisk_Errors

          Have you tried all those suggestions? I would guess your BIOS is reporting an incorrect geometry.

          Steve

          1 Reply Last reply Reply Quote 0
          • M Offline
            Mikk
            last edited by

            That's the spinner. Unfortunately it does not spin at all. Just hang's in this way.
            Yes, I read them. Idea of switching off floppy from BIOS came as well from this document (it didn't help).

            I have no idea, what BIOS thinks about geometry – it does not say and does not complain. But when I install pfSense, then it uses the same geometry as Seagate writes in HD doc: 6Y120L0, ACTUAL CYL: 238,216, MAX CYL: 16,383, HDS: 16, SECT: 63.

            From real working FreeBSD 10.0 dmesg:

            ada0: <maxtor 6y120l0="" yar41bw0="">ATA-7 device
            ada0: Serial Number Y3NRHXFE
            ada0: 133.000MB/s transfers (UDMA6, PIO 8192bytes)
            ada0: 117246MB (240121728 512 byte sectors: 16H 63S/T 16383C)</maxtor>

            1 Reply Last reply Reply Quote 0
            • stephenw10S Offline
              stephenw10 Netgate Administrator
              last edited by

              You could try a 2.2 snapshot, they are built on FreeBSD 10. They are still alpha at this stage but most things work.
              http://snapshots.pfsense.org/

              You are using the latest BIOS? You tried whatever manual harddrive modes are available?

              Steve

              1 Reply Last reply Reply Quote 0
              • M Offline
                Mikk
                last edited by

                I did have ordinary FreeBSD 8.3 working on the same hardware before. I also tried 2 pfSense previous releases. They were based also on 8.3, I guess. Nevertheless, I got the same result.

                I tried to switch every HD feature ON and OFF from BIOS, didn't try every combination of them of course.

                When I boot from live-CD, then one moment it writes: "acd0: FAILURE - READ_BIG MEDIUM ERROR". It does not stop on that place and does not complain later.

                Mikke

                1 Reply Last reply Reply Quote 0
                • stephenw10S Offline
                  stephenw10 Netgate Administrator
                  last edited by

                  I have a similar age Asus board in an old box here that absolutely will not boot anything other than Windows. However that's only on it's SATA connectors. It has an early separate SATA chip that appears as a SCSI device. It will boot anything you like via IDE.

                  Try disabling the SATA boot ROM.

                  Try booting from SATA

                  Your board appears to have some RAID functionality, are there any options for that?

                  Steve

                  1 Reply Last reply Reply Quote 0
                  • M Offline
                    Mikk
                    last edited by

                    1. I did not believe into pfSense new version, but I did try. I got few error messages, but finally it came up and works.
                    2. This SATA is really not normal one. At least I was not able to force my motherboard boot from it.

                    Is This ALPHA stable enough to use? Is it possible, that when it becomes ALPHA -> RELEASE once and I try to upgrade my firewall, it does not boot any more again?

                    All the best,
                    M

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S Offline
                      stephenw10 Netgate Administrator
                      last edited by

                      It's relatively stable but there things that are not functioning yet like captive portal and some packages. You should not use it anywhere critical.
                      It's unlikely any changes now would affect the boot sequence so 2.2 release will almost certainly work for if snapshots do.

                      Steve

                      1 Reply Last reply Reply Quote 0
                      • M Offline
                        Mikk
                        last edited by

                        Thank you very much!

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.