Port forwarding not working
-
That is called NAT reflection. This is off by default. You can turn that on to get the same effect.
-
Tried and still no luck, I used NAT and NAT+proxy but nothing.
I set it in the system -> advanced options first and then also on the NAT itself.Here are my current settings
Firewall NAT:Port Forward (NAT Address) (NAT Ports)
WAN TCP/UDP * * WAN Address 8099-8102 10.0.0.10 8099-8102Rules
ID IPv4 TCP/UDP * * 10.0.0.10 8099-8102 * noneany suggestions??
-
On your firewall rule- click log. try it again and see what shows up in the firewall logs…
BTW- what is showing up in the firewall logs when you try?
On the diagnostics page. Use packet capture and see if the requests are making the firewall.
-
i checked the logs and the only things making it to wan are outside addresses
-
i checked the logs and the only things making it to wan are outside addresses
Just a little more clarification, are you saying that port forwarding is broken completely? i.e. it fails from both outside and inside? Or is it working from the outside and only failing when you try to access it from the inside?
-
I currently cant try outside access for the rest of the day but I will try again tomorrow and post the answer
-
Adam-
please remember that no one can read your mind. :o
Was there a time when those outside the network could reach the server behind your firewall?
Could they still as of today?
Or is your only problem that those inside your network cannot use your DNS name to access the server?
-
i know, sorry i cant give the answer right away but im busy working. ill post back asap
-
i know, sorry i cant give the answer right away but im busy working. ill post back asap
Keep working Adam. ;)
At the risk of being redundant, have you already been through this document? https://doc.pfsense.org/index.php/Why_can%27t_I_access_forwarded_ports_on_my_WAN_IP_from_my_LAN/OPTx_networks
I think "Method 2" would most likely solve your trouble easily and cleanly. I works perfectly on every psSense installation I've used it on.
Note: Method 2 only works if your LAN clients are using DNS and not the actual external IP address and the router LAN IP is first in their DNS server list (either statically or via DHCP). If they are using the external IP address then you'll have to use Method 1 or Method 3.
-
so port forwarding is down completely and i cant access from WAN, im going to take the box home tonight and set it back to defaults and work from there again.
i know, sorry i cant give the answer right away but im busy working. ill post back asap
Keep working Adam. ;)
At the risk of being redundant, have you already been through this document? https://doc.pfsense.org/index.php/Why_can%27t_I_access_forwarded_ports_on_my_WAN_IP_from_my_LAN/OPTx_networks
I think "Method 2" would most likely solve your trouble easily and cleanly. I works perfectly on every psSense installation I've used it on.
Note: Method 2 only works if your LAN clients are using DNS and not the actual external IP address and the router LAN IP is first in their DNS server list (either statically or via DHCP). If they are using the external IP address then you'll have to use Method 1 or Method 3.I followed method 1 initially
Adam-
please remember that no one can read your mind. :o
Was there a time when those outside the network could reach the server behind your firewall?
Could they still as of today?
Or is your only problem that those inside your network cannot use your DNS name to access the server?sorry if i miss info, if anything isnt there then just tell me what to add
-
So is this UDP or TCP.. You have both setup in the forward and firewall rules.
Nat reflection IMHO should always be last option.. Clients on the local network, should resolve the host of the service your trying to use to its local IP. Clients on the outside should resolve to your public, and then yes be forwarded in.
AFIAK udp reflection doesn't even work, or there were issues with it that may have been resolved? As to details your missing - for starters what version of pfsense are you using? Is this pfsense a physical box or a VM?