/usr/local/sbin/check_reload_status
-
After setting traffic shaping this particular thread is consuming 100% of CPU, and the queue never reloads.
Running 2.2 alpha, i386 built 5/29/2014.
-
Checked my logs, found some clues.
If anyone could help me out, I'd appreciate it.check_reload_status: Reloading check_reload_status because it exited from an error!
kernel: pid 44605 (check_reload_status), uid 0: exited on signal 11 (core dumped)
check_reload_status: check_reload_status is starting.
heck_reload_status: fcgipath /var/run/php-fpm.socket
check_reload_status: Reloading check_reload_status because it exited from an error!This is all from 2.2-ALPHA (amd64) Mon May 26 10:16:02 CDT 2014
-
I am having 100% CPU because of check_reload_status too. I don't see the core dump error though. I upgraded from a 28th snapshot. Saving seems to take a lot longer than with the 28th snapshot too which might be related. As an example… I unchecked the 'display logs in reverse order' and hit save and took about a minute to complete.
2.2-ALPHA (i386)
built on Thu May 29 06:53:30 CDT 2014
FreeBSD 10.0-STABLElast pid: 52594; load averages: 2.28, 2.20, 2.11 up 1+02:35:07 11:37:02 110 processes: 6 running, 87 sleeping, 17 waiting Mem: 64M Active, 534M Inact, 124M Wired, 85M Buf, 220M Free Swap: 8192M Total, 8192M Free PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND 270 root 120 20 10184K 1768K RUN 24.9H 92.29% /usr/local/sbin/check_reload_status 40940 root 23 0 80260K 57980K uwait 22:38 5.66% /usr/local/bin/suricata -i rl0 -D -c /usr/p 256 root 28 0 90704K 42948K piperd 0:41 2.39% php-fpm: pool lighty (php-fpm){php-fpm} 12 root -60 - 0K 136K WAIT 16:45 0.00% [intr{swi4: clock}] 15 root -16 - 0K 8K - 7:35 0.00% [rand_harvestq] 12 root -92 - 0K 136K WAIT 6:34 0.00% [intr{irq12: rl0 uhci0}] 12 root -92 - 0K 136K WAIT 3:08 0.00% [intr{irq10: rl1}] 5 root -16 - 0K 8K pftm 1:22 0.00% [pf purge] 40940 root 20 0 80260K 57980K nanslp 0:55 0.00% /usr/local/bin/suricata -i rl0 -D -c /usr/p 0 root -16 0 0K 80K swapin 0:45 0.00% [kernel{swapper}] 43413 root 52 20 10544K 2060K wait 0:37 0.00% /bin/sh /var/db/rrd/updaterrd.sh 20236 root 20 0 10100K 1740K select 0:35 0.00% /usr/local/sbin/apinger -c /var/etc/apinger 6912 root 20 0 10256K 1968K select 0:32 0.00% /usr/sbin/syslogd -s -c -c -l /var/dhcpd/va 257 root 52 0 86480K 39472K accept 0:27 0.00% php-fpm: pool lighty (php-fpm){php-fpm} 40940 root 20 0 80260K 57980K uwait 0:20 0.00% /usr/local/bin/suricata -i rl0 -D -c /usr/p 255 root 46 0 86608K 37568K accept 0:17 0.00% php-fpm: pool lighty (php-fpm){php-fpm} 4 root -16 - 0K 16K - 0:15 0.00% [cam{doneq0}] 33483 nobody 20 0 15432K 5192K select 0:15 0.00% [dnsmasq]
May 29 09:02:25 syslogd: kernel boot file is /boot/kernel/kernel May 29 09:02:25 kernel: Copyright (c) 1992-2014 The FreeBSD Project. May 29 09:02:25 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 May 29 09:02:25 kernel: The Regents of the University of California. All rights reserved. May 29 09:02:25 kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. May 29 09:02:25 kernel: FreeBSD 10.0-STABLE #33 e852cd6(HEAD)-dirty: Thu May 29 07:25:23 CDT 2014 May 29 09:02:25 kernel: root@pf22-i386-snap:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_SMP.10 i386 May 29 09:02:25 kernel: FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 May 29 09:02:25 kernel: CPU: Intel(R) Celeron(R) processor 600MHz (599.95-MHz 686-class CPU) May 29 09:02:25 kernel: Origin = "GenuineIntel" Id = 0x695 Family = 0x6 Model = 0x9 Stepping = 5 May 29 09:02:25 kernel: Features=0xa7e9f9bf <fpu,vme,de,pse,tsc,msr,mce,cx8,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,tm,pbe>May 29 09:02:25 kernel: real memory = 1040187392 (992 MB) May 29 09:02:25 kernel: avail memory = 983924736 (938 MB) May 29 09:02:25 kernel: wlan: mac acl policy registered May 29 09:02:25 kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. May 29 09:02:25 kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. May 29 09:02:25 kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07cd730, 0) error 1 May 29 09:02:25 kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. May 29 09:02:25 kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. May 29 09:02:25 kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07cd7e0, 0) error 1 May 29 09:02:25 kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. May 29 09:02:25 kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. May 29 09:02:25 kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07cd890, 0) error 1 May 29 09:02:25 kernel: iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. May 29 09:02:25 kernel: iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. May 29 09:02:25 kernel: module_register_init: MOD_LOAD (iwi_bss_fw, 0xc07f3c80, 0) error 1 May 29 09:02:25 kernel: iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. May 29 09:02:25 kernel: iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. May 29 09:02:25 kernel: module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc07f3d30, 0) error 1 May 29 09:02:25 kernel: iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. May 29 09:02:25 kernel: iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. May 29 09:02:25 kernel: module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc07f3de0, 0) error 1 May 29 09:02:25 kernel: kbd1 at kbdmux0 May 29 09:02:25 kernel: random: <software, yarrow=""> initialized May 29 09:02:25 kernel: ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223) May 29 09:02:25 kernel: ACPI: Table initialisation failed: AE_NOT_FOUND May 29 09:02:25 kernel: ACPI: Try disabling either ACPI or apic support. May 29 09:02:25 kernel: cryptosoft0: <software crypto=""> on motherboard May 29 09:02:25 kernel: padlock0: No ACE support. May 29 09:02:25 kernel: pcib0 pcibus 0 on motherboard May 29 09:02:25 kernel: pir0: <pci 10="" interrupt="" routing="" table:="" entries=""> on motherboard May 29 09:02:25 kernel: pci0: <pci bus=""> on pcib0 May 29 09:02:25 kernel: pci0: <base peripheral=""> at device 0.1 (no driver attached) May 29 09:02:25 kernel: pci0: <base peripheral=""> at device 0.3 (no driver attached) May 29 09:02:25 kernel: vgapci0: <vga-compatible display=""> port 0xe200-0xe207 mem 0xd8000000-0xdfffffff,0xe8180000-0xe81fffff irq 12 at device 2.0 on pci0 May 29 09:02:25 kernel: agp0: <intel 8285xm="" (85xgm="" gmch)="" svga="" controller=""> on vgapci0 May 29 09:02:25 kernel: agp0: aperture size is 128M, detected 32636k stolen memory May 29 09:02:25 kernel: vgapci0: Boot video device May 29 09:02:25 kernel: vgapci1: <vga-compatible display=""> mem 0xe0000000-0xe7ffffff,0xe8100000-0xe817ffff at device 2.1 on pci0 May 29 09:02:25 kernel: uhci0: <intel 82801db="" (ich4)="" usb="" controller="" usb-a=""> port 0xe000-0xe01f irq 12 at device 29.0 on pci0 May 29 09:02:25 kernel: usbus0 on uhci0 May 29 09:02:25 kernel: uhci1: <intel 82801db="" (ich4)="" usb="" controller="" usb-b=""> port 0xe100-0xe11f irq 5 at device 29.1 on pci0 May 29 09:02:25 kernel: usbus1 on uhci1 May 29 09:02:25 kernel: ehci0: <intel 82801db="" l="" m="" (ich4)="" usb="" 2.0="" controller=""> mem 0xe8200000-0xe82003ff irq 9 at device 29.7 on pci0 May 29 09:02:25 kernel: usbus2: EHCI version 1.0 May 29 09:02:25 kernel: usbus2 on ehci0 May 29 09:02:25 kernel: pcib1: <pcibios pci-pci="" bridge=""> at device 30.0 on pci0 May 29 09:02:25 kernel: pci1: <pci bus=""> on pcib1 May 29 09:02:25 kernel: rl0: <realtek 10="" 8139="" 100basetx=""> port 0xd000-0xd0ff mem 0xe8000000-0xe80000ff irq 12 at device 4.0 on pci1 May 29 09:02:25 kernel: miibus0: <mii bus=""> on rl0 May 29 09:02:25 kernel: rlphy0: <realtek internal="" media="" interface=""> PHY 0 on miibus0 May 29 09:02:25 kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto May 29 09:02:25 kernel: rl1: <realtek 10="" 8139="" 100basetx=""> port 0xd100-0xd1ff mem 0xe8001000-0xe80010ff irq 10 at device 5.0 on pci1 May 29 09:02:25 kernel: miibus1: <mii bus=""> on rl1 May 29 09:02:25 kernel: rlphy1: <realtek internal="" media="" interface=""> PHY 0 on miibus1 May 29 09:02:25 kernel: rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto May 29 09:02:25 kernel: rl2: <realtek 10="" 8139="" 100basetx=""> port 0xd200-0xd2ff mem 0xe8002000-0xe80020ff irq 11 at device 6.0 on pci1 May 29 09:02:25 kernel: miibus2: <mii bus=""> on rl2 May 29 09:02:25 kernel: rlphy2: <realtek internal="" media="" interface=""> PHY 0 on miibus2 May 29 09:02:25 kernel: rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto May 29 09:02:25 kernel: rl3: <realtek 10="" 8139="" 100basetx=""> port 0xd300-0xd3ff mem 0xe8003000-0xe80030ff irq 5 at device 7.0 on pci1 May 29 09:02:25 kernel: miibus3: <mii bus=""> on rl3 May 29 09:02:25 kernel: rlphy3: <realtek internal="" media="" interface=""> PHY 0 on miibus3 May 29 09:02:25 kernel: rlphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto May 29 09:02:25 kernel: isab0: <pci-isa bridge=""> at device 31.0 on pci0 May 29 09:02:25 kernel: isa0: <isa bus=""> on isab0 May 29 09:02:25 kernel: atapci0: <intel ich4="" udma100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0 May 29 09:02:25 kernel: ata0: <ata channel=""> at channel 0 on atapci0 May 29 09:02:25 kernel: ata1: <ata channel=""> at channel 1 on atapci0 May 29 09:02:25 kernel: pci0: <serial bus,="" smbus=""> at device 31.3 (no driver attached) May 29 09:02:25 kernel: cpu0 on motherboard May 29 09:02:25 kernel: p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0 May 29 09:02:25 kernel: pmtimer0 on isa0 May 29 09:02:25 kernel: attimer0: <at timer=""> at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0 May 29 09:02:25 kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 May 29 09:02:25 kernel: Event timer "i8254" frequency 1193182 Hz quality 100 May 29 09:02:25 kernel: atrtc0: <at realtime="" clock=""> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0 May 29 09:02:25 kernel: Event timer "RTC" frequency 32768 Hz quality 0 May 29 09:02:25 kernel: atkbdc0: <keyboard controller="" (i8042)=""> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0 May 29 09:02:25 kernel: atkbd0: <at keyboard=""> irq 1 on atkbdc0 May 29 09:02:25 kernel: kbd0 at atkbd0 May 29 09:02:25 kernel: atkbd0: [GIANT-LOCKED] May 29 09:02:25 kernel: unknown: <pnp0c01> can't assign resources (memory) May 29 09:02:25 kernel: unknown: <pnp0c02> can't assign resources (memory) May 29 09:02:25 kernel: uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0 May 29 09:02:25 kernel: uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0 May 29 09:02:25 kernel: orm0: <isa option="" roms=""> at iomem 0xc0000-0xcc7ff,0xd0000-0xd3fff pnpid ORM0000 on isa0 May 29 09:02:25 kernel: sc0: <system console=""> at flags 0x100 on isa0 May 29 09:02:25 kernel: sc0: VGA <16 virtual consoles, flags=0x300> May 29 09:02:25 kernel: vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 May 29 09:02:25 kernel: ppc0: parallel port not found. May 29 09:02:25 kernel: unknown: <pnp0c01> can't assign resources (memory) May 29 09:02:25 kernel: unknown: <pnp0c02> can't assign resources (memory) May 29 09:02:25 kernel: Timecounters tick every 1.000 msec May 29 09:02:25 kernel: IPsec: Initialized Security Association Processing. May 29 09:02:25 kernel: random: unblocking device. May 29 09:02:25 kernel: usbus0: 12Mbps Full Speed USB v1.0 May 29 09:02:25 kernel: usbus1: 12Mbps Full Speed USB v1.0 May 29 09:02:25 kernel: usbus2: 480Mbps High Speed USB v2.0 May 29 09:02:25 kernel: ugen1.1: <intel> at usbus1 May 29 09:02:25 kernel: uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus1 May 29 09:02:25 kernel: ugen0.1: <intel> at usbus0 May 29 09:02:25 kernel: uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus0 May 29 09:02:25 kernel: ugen2.1: <intel> at usbus2 May 29 09:02:25 kernel: uhub2: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus2 May 29 09:02:25 kernel: ata0: DMA limited to UDMA33, controller found non-ATA66 cable May 29 09:02:25 kernel: ada0 at ata0 bus 0 scbus0 target 0 lun 0 May 29 09:02:25 kernel: ada0: <fujitsu mht2040ah="" 006c=""> ATA-6 device May 29 09:02:25 kernel: ada0: Serial Number NP0ET472HS1E May 29 09:02:25 kernel: ada0: 33.300MB/s transfers (UDMA2, PIO 8192bytes) May 29 09:02:25 kernel: ada0: 38154MB (78140160 512 byte sectors: 16H 63S/T 16383C) May 29 09:02:25 kernel: ada0: Previously was known as ad0 May 29 09:02:25 kernel: Timecounter "TSC" frequency 599945224 Hz quality 800 May 29 09:02:25 kernel: Root mount waiting for: usbus2 usbus1 usbus0 May 29 09:02:25 kernel: uhub0: 2 ports with 2 removable, self powered May 29 09:02:25 kernel: uhub1: 2 ports with 2 removable, self powered May 29 09:02:25 kernel: Root mount waiting for: usbus2 May 29 09:02:25 kernel: uhub2: 4 ports with 4 removable, self powered May 29 09:02:25 kernel: Trying to mount root from ufs:/dev/ad0s1a [rw]... May 29 09:02:25 kernel: warning: total configured swap (2097152 pages) exceeds maximum recommended amount (1930656 pages). May 29 09:02:25 kernel: warning: increase kern.maxswzone or reduce amount of swap. May 29 09:02:25 kernel: rl0: link state changed to DOWN May 29 09:02:25 kernel: rl0: link state changed to UP May 29 09:02:22 devd: Executing '/usr/local/sbin/pfSctl -c 'interface linkup stop rl0'' May 29 09:02:22 check_reload_status: Linkup starting rl0 May 29 09:02:24 devd: Executing '/usr/local/sbin/pfSctl -c 'interface linkup start rl0'' May 29 09:02:24 check_reload_status: Linkup starting rl0 May 29 09:02:26 syslogd: sendto: No route to host May 29 09:02:26 syslogd: sendto: No route to host May 29 09:02:26 syslogd: sendto: No route to host May 29 09:02:26 syslogd: sendto: No route to host May 29 09:02:26 syslogd: sendto: No route to host May 29 09:02:27 check_reload_status: rc.newwanip starting rl0 May 29 09:02:27 kernel: rl1: link state changed to DOWN May 29 09:02:27 devd: Executing '/usr/local/sbin/pfSctl -c 'interface linkup stop rl1'' May 29 09:02:27 check_reload_status: Linkup starting rl1 May 29 09:02:28 php: rc.bootup: Resyncing OpenVPN instances. May 29 09:02:28 kernel: May 29 09:02:28 kernel: tun1: changing name to 'ovpns1' May 29 09:02:29 kernel: rl1: link state changed to UP May 29 09:02:29 devd: Executing '/usr/local/sbin/pfSctl -c 'interface linkup start rl1'' May 29 09:02:29 check_reload_status: Linkup starting rl1 May 29 09:02:33 kernel: pflog0: promiscuous mode enabled May 29 09:02:33 kernel: . May 29 09:02:33 kernel: May 29 09:02:33 kernel: ovpns1: link state changed to UP May 29 09:02:33 check_reload_status: rc.newwanip starting ovpns1 May 29 09:02:35 kernel: .. May 29 09:02:37 kernel: . May 29 09:02:37 kernel: done. May 29 09:02:42 kernel: done. May 29 09:02:45 php: rc.bootup: The command '/usr/sbin/pw userdel -n 'admin'' returned exit code '1', the output was 'pw: entry inconsistent pw: gr_copy(): Invalid argument' May 29 09:03:07 kernel: done. May 29 09:03:12 php: rc.bootup: ROUTING: setting default route to y.y.y.1 May 29 09:03:12 kernel: done. May 29 09:03:12 kernel: done. May 29 09:03:18 kernel: done. May 29 09:03:18 check_reload_status: Updating all dyndns May 29 09:03:18 kernel: . May 29 09:03:19 kernel: . May 29 09:03:20 kernel: .. May 29 09:03:21 kernel: .done. May 29 09:03:37 php: rc.bootup: Creating rrd update script May 29 09:03:37 kernel: done. May 29 09:03:38 php-fpm[257]: /rc.start_packages: Restarting/Starting all packages. May 29 09:03:40 login: login on ttyv1 as root May 29 09:03:40 login: login on ttyv0 as root May 29 09:03:40 sshlockout[70677]: sshlockout/webConfigurator v3.0 starting up May 29 09:07:38 kernel: rl2: link state changed to DOWN May 29 09:07:38 kernel: rl3: link state changed to DOWN May 29 09:07:38 devd: Executing '/usr/local/sbin/pfSctl -c 'interface linkup stop rl2'' May 29 09:07:38 devd: Executing '/usr/local/sbin/pfSctl -c 'interface linkup stop rl3'' May 29 09:07:38 check_reload_status: Linkup starting rl2 May 29 09:07:38 check_reload_status: Linkup starting rl3 May 29 09:38:47 php-fpm[257]: /index.php: Successful login for user 'admin' from: 192.168.1.4 May 29 09:38:47 php-fpm[257]: /index.php: Successful login for user 'admin' from: 192.168.1.4 May 30 01:01:03 php: rc.dyndns.update: phpDynDNS (xxxxxxxxxxxxx.homenet.org): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry. May 30 04:25:06 php-fpm[256]: /index.php: Session timed out for user 'admin' from: 192.168.1.4 May 30 04:25:12 php-fpm[256]: /index.php: Successful login for user 'admin' from: 192.168.1.4 May 30 04:25:12 php-fpm[256]: /index.php: Successful login for user 'admin' from: 192.168.1.4 May 30 04:29:52 check_reload_status: Syncing firewall May 30 04:29:52 php-fpm[255]: /pkg_mgr_install.php: Beginning package installation for suricata . May 30 04:29:53 check_reload_status: Syncing firewall May 30 04:30:22 check_reload_status: Syncing firewall May 30 04:30:24 check_reload_status: Syncing firewall May 30 04:30:26 check_reload_status: Syncing firewall May 30 04:30:26 check_reload_status: Reloading filter May 30 04:30:31 check_reload_status: Something wrong happened while sending request: Broken pipe May 30 04:31:22 check_reload_status: Syncing firewall May 30 04:31:22 php-fpm[257]: /pkg_mgr_install.php: Beginning package installation for suricata . May 30 04:31:23 check_reload_status: Syncing firewall May 30 04:31:53 check_reload_status: Syncing firewall May 30 04:31:55 check_reload_status: Syncing firewall May 30 04:31:57 check_reload_status: Syncing firewall May 30 04:31:57 check_reload_status: Reloading filter May 30 04:32:02 check_reload_status: Something wrong happened while sending request: Broken pipe May 30 04:34:36 check_reload_status: Syncing firewall May 30 04:34:36 check_reload_status: Reloading filter May 30 04:34:56 check_reload_status: Syncing firewall May 30 04:34:56 php-fpm[256]: /pkg_mgr_install.php: Beginning package installation for suricata . May 30 04:34:57 check_reload_status: Syncing firewall May 30 04:39:50 php-fpm[256]: /pkg_mgr_install.php: [Suricata] Package post-installation tasks completed... May 30 04:39:50 check_reload_status: Syncing firewall May 30 04:39:54 check_reload_status: Syncing firewall May 30 04:39:54 check_reload_status: Reloading filter May 30 04:44:35 check_reload_status: Syncing firewall May 30 04:44:41 php-fpm[255]: /suricata/suricata_download_rules.php: [Suricata] There is a new set of Emerging Threats Open rules posted. Downloading emerging.rules.tar.gz... May 30 04:44:42 php-fpm[255]: /suricata/suricata_download_rules.php: [Suricata] Emerging Threats Open rules file update downloaded successfully May 30 04:44:46 php-fpm[255]: /suricata/suricata_download_rules.php: [Suricata] The Rules update has finished. May 30 04:44:47 check_reload_status: Syncing firewall May 30 04:49:12 check_reload_status: Syncing firewall May 30 04:49:12 php-fpm[257]: /suricata/suricata_interfaces_edit.php: [Suricata] Updating rules configuration for: WAN ... May 30 04:49:23 php-fpm[257]: /suricata/suricata_interfaces_edit.php: [Suricata] Building new sig-msg.map file for WAN... May 30 04:49:26 check_reload_status: Syncing firewall May 30 04:49:28 check_reload_status: Syncing firewall May 30 04:49:30 check_reload_status: Syncing firewall May 30 04:49:35 check_reload_status: Something wrong happened while sending request: Broken pipe May 30 04:49:52 php-fpm[256]: /suricata/suricata_interfaces.php: Toggle (suricata starting) for WAN(WAN)... May 30 04:49:52 php-fpm[256]: /suricata/suricata_interfaces.php: [Suricata] Updating rules configuration for: WAN ... May 30 04:50:02 php-fpm[256]: /suricata/suricata_interfaces.php: [Suricata] Building new sig-msg.map file for WAN... May 30 04:50:04 check_reload_status: Syncing firewall May 30 04:50:05 check_reload_status: Syncing firewall May 30 04:50:07 check_reload_status: Syncing firewall May 30 04:50:07 php-fpm[256]: /suricata/suricata_interfaces.php: [Suricata] Suricata START for WAN(rl0)... May 30 04:50:11 kernel: rl0: promiscuous mode enabled May 30 04:50:12 check_reload_status: Something wrong happened while sending request: Broken pipe May 30 04:51:23 check_reload_status: Syncing firewall May 30 04:51:24 check_reload_status: Syncing firewall May 30 04:51:26 check_reload_status: Syncing firewall May 30 04:51:31 check_reload_status: Something wrong happened while sending request: Broken pipe May 30 04:55:05 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 05:00:04 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 05:05:04 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 05:10:04 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 05:13:21 check_reload_status: Syncing firewall May 30 05:13:22 check_reload_status: Syncing firewall May 30 05:13:24 check_reload_status: Syncing firewall May 30 05:13:29 check_reload_status: Something wrong happened while sending request: Broken pipe May 30 05:14:05 php-fpm[257]: /suricata/suricata_interfaces.php: Toggle (suricata stopping) for WAN(WAN)... May 30 05:14:05 php-fpm[257]: /suricata/suricata_interfaces.php: [Suricata] Suricata STOP for WAN(rl0)... May 30 05:14:06 kernel: rl0: promiscuous mode disabled May 30 05:14:15 php-fpm[256]: /suricata/suricata_interfaces.php: Toggle (suricata starting) for WAN(WAN)... May 30 05:14:15 php-fpm[256]: /suricata/suricata_interfaces.php: [Suricata] Updating rules configuration for: WAN ... May 30 05:14:24 php-fpm[256]: /suricata/suricata_interfaces.php: [Suricata] Building new sig-msg.map file for WAN... May 30 05:14:26 check_reload_status: Syncing firewall May 30 05:14:28 check_reload_status: Syncing firewall May 30 05:14:30 check_reload_status: Syncing firewall May 30 05:14:30 php-fpm[256]: /suricata/suricata_interfaces.php: [Suricata] Suricata START for WAN(rl0)... May 30 05:14:32 kernel: rl0: promiscuous mode enabled May 30 05:14:35 check_reload_status: Something wrong happened while sending request: Broken pipe May 30 05:15:04 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 05:20:04 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 05:25:04 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 05:30:04 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 05:35:04 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 05:40:06 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 05:45:24 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 05:50:11 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 05:55:25 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 06:00:37 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 06:05:43 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 06:11:03 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 06:15:35 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 06:20:40 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 06:25:54 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 06:30:49 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 06:35:53 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 06:40:58 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start May 30 06:46:03 php: sendmail: Could not send the message to xxxxxx@xxxxx.com -- Error: 454 4.3.3 TLS not available after start</fujitsu></intel></intel></intel></intel></intel></intel></pnp0c02></pnp0c01></generic></system></isa></pnp0c02></pnp0c01></at></keyboard></at></at></cpu></serial></ata></ata></intel></isa></pci-isa></realtek></mii></realtek></realtek></mii></realtek></realtek></mii></realtek></realtek></mii></realtek></pci></pcibios></intel></intel></intel></vga-compatible></intel></vga-compatible></pci></pci></software></software,></fpu,vme,de,pse,tsc,msr,mce,cx8,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,tm,pbe>
-
Added system log to my previous post.
-
Hmm, and your webgui is apparently working !? My webgui is borken now for a few days, but I'm on amd-64. Maybe I'll have to try an i386 snapshot.
-
It only works because I did a fresh install from a snapshot made a few days ago.
I thought I said that but I'm on a tiny iPhone.
Snapshot is from the 26th, and I've used 64 and 86, this problem persists in both. -
My webgui is working it is just slow at times since CPU is getting eaten up by check_reload_status. I think it all started (It did according to the graph) when I installed the snapshot from the 29th build. I can see that RRD graph was fine cpu wise before then. I installed the snaphot of the 29th around 9am on the 29th.
I am going to reboot and see if the CPU load changes.
-
I pushed a fix for check_reload_status this morning, could you please wait a new snapshot and give it a try?
-
It seems to be working fine for me. I have changed a lot of things in the gui and haven't seen any issues with it or php-fpm locking up either. Thanks! That certianly makes running the Alpha easier.
EDIT: removed sshd info. That is handled in another thread and is working in the current release now from 7am this morning.