No Web Interface on Thu May 29 08:48:37 CDT 2014
-
3rd of June 64bit Nano updates are still far too small. :(
Steve
Maybe to speed up full snaps. Better to anyone play a bell on devs to start compile nanobsd normally again.
-
3rd of June 64bit Nano updates are still far too small.
Tried applying one anyway? Maybe try it in a VM, it could still be a valid update.
-
The update files for NanoBSD are an image of the slice that is to be replaced. The usual size for the compressed image (for the 1GB Nano type) is ~68MB, the current update files are ~0.8MB. Now I'm willing to accept the compression algorithm may have been updated but it would be impressive if it can get 100X smaller! ;)
Steve
-
The GUI works on the latest snapshot. SSHD is down now though which was working in the snapshot from a day ago. Trying to start it from the GUI doesn't work. Staring it manually at the console with '/etc/sshd start' works though. I would much rather have to start sshd manually than the GUI stop working at times. This is definitely progress! :).
-
I found the issue and pushed a fix few minutes ago. Please wait for the new snapshot.
-
I found the issue and pushed a fix few minutes ago. Please wait for the new snapshot.
Seems that all is working now, thanks for the fixes! In my test VM: webgui is up, sshd starts (once it's enabled), and check_reload_status returns to zero cpu usage after a reasonable amount of time. Though the nano image sizes still seem to be too small.
[2.2-ALPHA][admin@pfSense.localdomain]/etc(5): cat version.buildtime Tue Jun 03 07:27:23 CDT 2014
-
Php-fpm and check_reload_status is working for me except sshd. Sshd doesn't start for me through the gui or at startup. I can manually start it with '/etc/sshd start' at the console though.
-
built on Tue Jun 03 07:27:23 CDT 2014
-
Gui - Yes
-
sshd - yes
-
ntpd - no
-
-
I noticed the new version of 7am. I am on the 3am version so I am updating again to fix sshd.
-
@mais_um:
built on Tue Jun 03 07:27:23 CDT 2014
-
Gui - Yes
-
sshd - yes
-
ntpd - no
Hmm, ntpd works for me. Can you post details and logs … in a new thread?
-
-
NTP logs after restart
Jun 3 15:16:15 ntpd[89750]: ntpd 4.2.7p443@1.2483-o Thu May 29 20:00:00 UTC 2014 (1): Starting Jun 3 15:16:15 ntpd[89750]: Command line: /usr/local/sbin/ntpd -g -c /var/etc/ntpd.conf -p /var/run/ntpd.pid Jun 3 15:16:15 ntpd[89829]: proto: precision = 0.500 usec (-21) Jun 3 15:16:15 ntpd[89829]: unable to bind to wildcard address :: - another process may be running - EXITING Jun 3 15:23:04 ntpd[53617]: ntpd 4.2.7p443@1.2483-o Thu May 29 20:00:00 UTC 2014 (1): Starting Jun 3 15:23:04 ntpd[53617]: Command line: /usr/local/sbin/ntpd -g -c /var/etc/ntpd.conf -p /var/run/ntpd.pid Jun 3 15:23:04 ntpd[53837]: proto: precision = 0.500 usec (-21) Jun 3 15:23:04 ntpd[53837]: unable to bind to wildcard address :: - another process may be running - EXITING Jun 3 15:26:39 ntpdate[76657]: sendto(194.117.9.136): No error: 0 Jun 3 15:26:41 ntpdate[44690]: sendto(194.117.9.136): No error: 0 Jun 3 15:26:41 ntpdate[44690]: sendto(193.136.60.172): No error: 0 Jun 3 15:26:46 ntpdate[44690]: sendto(194.117.9.136): No error: 0 Jun 3 15:26:46 ntpdate[44690]: sendto(193.136.60.172): No error: 0 Jun 3 15:29:07 ntpdate[95503]: sendto(194.117.9.136): No error: 0 Jun 3 15:29:07 ntpdate[95503]: sendto(193.136.60.172): No error: 0 Jun 3 15:29:12 ntpdate[95503]: sendto(194.117.9.136): No error: 0 Jun 3 15:29:12 ntpdate[95503]: sendto(193.136.60.172): No error: 0 Jun 3 15:29:12 ntpdate[95503]: step time server 194.117.9.136 offset -5.067841 sec Jun 3 15:29:12 ntp: Successfully synced time after 1 attempts. Jun 3 15:29:12 ntp: Starting NTP Daemon. Jun 3 15:29:12 ntpd[86413]: ntpd 4.2.7p443@1.2483-o Thu May 29 20:00:00 UTC 2014 (1): Starting Jun 3 15:29:12 ntpd[86413]: Command line: /usr/local/sbin/ntpd -g -c /var/etc/ntpd.conf -p /var/run/ntpd.pid Jun 3 15:29:12 ntpd[86544]: proto: precision = 0.500 usec (-21) Jun 3 15:29:12 ntpd[86544]: Listen and drop on 0 v6wildcard [::]:123 Jun 3 15:29:12 ntpd[86544]: Listen and drop on 1 v4wildcard 0.0.0.0:123 Jun 3 15:29:12 ntpd[86544]: Listen normally on 2 de0 [fe80::215:5dff:fe00:6412%1]:123 Jun 3 15:29:12 ntpd[86544]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6412%1 fails: Can't assign requested address Jun 3 15:29:12 ntpd[86544]: Listen normally on 3 de1 192.168.1.1:123 Jun 3 15:29:12 ntpd[86544]: Listen normally on 4 de1 [fe80::215:5dff:fe00:6413%2]:123 Jun 3 15:29:12 ntpd[86544]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6413%2 fails: Can't assign requested address Jun 3 15:29:12 ntpd[86544]: Listen normally on 5 de2 [fe80::215:5dff:fe00:6414%3]:123 Jun 3 15:29:12 ntpd[86544]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6414%3 fails: Can't assign requested address Jun 3 15:29:12 ntpd[86544]: Listen normally on 6 lo0 127.0.0.1:123 Jun 3 15:29:12 ntpd[86544]: Listen normally on 7 lo0 [::1]:123 Jun 3 15:29:12 ntpd[86544]: Listen normally on 8 lo0 [fe80::1%6]:123 Jun 3 15:29:12 ntpd[86544]: setsockopt IPV6_MULTICAST_IF 0 for fe80::1%6 fails: Can't assign requested address Jun 3 15:29:12 ntpd[86544]: Listen normally on 9 pppoe0 192.168.3.96:123 Jun 3 15:29:12 ntpd[86544]: Listen normally on 10 pppoe0 [fe80::215:5dff:fe00:6412%8]:123 Jun 3 15:29:12 ntpd[86544]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6412%8 fails: Can't assign requested address Jun 3 15:29:12 ntpd[86544]: Listening on routing socket on fd #31 for interface updates Jun 3 15:29:12 ntpd[86544]: refclock_open /dev/gps0: Is a directory Jun 3 15:29:12 ntpd[86544]: 127.127.20.0 local addr 127.0.0.1 -> <null> Jun 3 15:31:04 ntpd[86544]: Deleting interface #9 pppoe0, 192.168.3.96#123, interface stats: received=0, sent=0, dropped=0, active_time=112 secs Jun 3 15:31:04 ntpd[86544]: Deleting interface #10 pppoe0, fe80::215:5dff:fe00:6412%8#123, interface stats: received=0, sent=0, dropped=0, active_time=112 secs Jun 3 15:31:28 ntpd[86544]: Listen normally on 11 pppoe0 [fe80::215:5dff:fe00:6412%8]:123 Jun 3 15:31:28 ntpd[86544]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6412%8 fails: Can't assign requested address Jun 3 15:31:28 ntpd[86544]: Listen normally on 12 pppoe0 192.168.3.80:123 Jun 3 15:31:28 ntpd[86544]: new interface(s) found: waking up resolver Jun 3 15:31:30 ntpd[86544]: ntpd exiting on signal 15 (Terminated) Jun 3 15:31:31 ntpdate[47657]: Can't find host 0.pfsense.pool.ntp.org: hostname nor servname provided, or not known (8) Jun 3 15:31:31 ntpdate[47657]: no servers can be used, exiting Jun 3 15:31:38 ntpdate[53747]: Can't find host 0.pfsense.pool.ntp.org: hostname nor servname provided, or not known (8) Jun 3 15:31:38 ntpdate[53747]: no servers can be used, exiting Jun 3 15:31:59 ntpdate[63387]: adjust time server 194.117.9.136 offset -0.000754 sec Jun 3 15:31:59 ntp: Successfully synced time after 3 attempts. Jun 3 15:31:59 ntp: Starting NTP Daemon. Jun 3 15:31:59 ntpd[64059]: ntpd 4.2.7p443@1.2483-o Thu May 29 20:00:00 UTC 2014 (1): Starting Jun 3 15:31:59 ntpd[64059]: Command line: /usr/local/sbin/ntpd -g -c /var/etc/ntpd.conf -p /var/run/ntpd.pid Jun 3 15:31:59 ntpd[64376]: proto: precision = 1.300 usec (-19) Jun 3 15:31:59 ntpd[64376]: Listen and drop on 0 v6wildcard [::]:123 Jun 3 15:31:59 ntpd[64376]: Listen and drop on 1 v4wildcard 0.0.0.0:123 Jun 3 15:31:59 ntpd[64376]: Listen normally on 2 de0 [fe80::215:5dff:fe00:6412%1]:123 Jun 3 15:31:59 ntpd[64376]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6412%1 fails: Can't assign requested address Jun 3 15:31:59 ntpd[64376]: Listen normally on 3 de0 10.0.0.152:123 Jun 3 15:31:59 ntpd[64376]: Listen normally on 4 de1 192.168.1.1:123 Jun 3 15:31:59 ntpd[64376]: Listen normally on 5 de1 [fe80::215:5dff:fe00:6413%2]:123 Jun 3 15:31:59 ntpd[64376]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6413%2 fails: Can't assign requested address Jun 3 15:31:59 ntpd[64376]: Listen normally on 6 de2 [fe80::215:5dff:fe00:6414%3]:123 Jun 3 15:31:59 ntpd[64376]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6414%3 fails: Can't assign requested address Jun 3 15:31:59 ntpd[64376]: Listen normally on 7 lo0 127.0.0.1:123 Jun 3 15:31:59 ntpd[64376]: Listen normally on 8 lo0 [::1]:123 Jun 3 15:31:59 ntpd[64376]: Listen normally on 9 lo0 [fe80::1%6]:123 Jun 3 15:31:59 ntpd[64376]: setsockopt IPV6_MULTICAST_IF 0 for fe80::1%6 fails: Can't assign requested address Jun 3 15:31:59 ntpd[64376]: Listen normally on 10 pppoe0 [fe80::215:5dff:fe00:6412%8]:123 Jun 3 15:31:59 ntpd[64376]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6412%8 fails: Can't assign requested address Jun 3 15:31:59 ntpd[64376]: Listen normally on 11 pppoe0 192.168.3.80:123 Jun 3 15:31:59 ntpd[64376]: Listening on routing socket on fd #32 for interface updates Jun 3 15:31:59 ntpd[64376]: refclock_open /dev/gps0: Is a directory Jun 3 15:31:59 ntpd[64376]: 127.127.20.0 local addr 127.0.0.1 -> <null> Jun 3 15:32:15 ntpd[64376]: Deleting interface #10 pppoe0, fe80::215:5dff:fe00:6412%8#123, interface stats: received=0, sent=0, dropped=0, active_time=16 secs Jun 3 15:32:15 ntpd[64376]: Deleting interface #11 pppoe0, 192.168.3.80#123, interface stats: received=0, sent=0, dropped=0, active_time=16 secs Jun 3 15:32:19 ntpd[64376]: Listen normally on 12 pppoe0 192.168.3.81:123 Jun 3 15:32:19 ntpd[64376]: Listen normally on 13 pppoe0 [fe80::215:5dff:fe00:6412%8]:123 Jun 3 15:32:19 ntpd[64376]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6412%8 fails: Can't assign requested address Jun 3 15:32:19 ntpd[64376]: new interface(s) found: waking up resolver Jun 3 15:32:20 ntpd[64376]: ntpd exiting on signal 15 (Terminated) Jun 3 15:32:27 ntpdate[54262]: sendto(194.117.9.136): No error: 0 Jun 3 15:32:28 ntpdate[54262]: sendto(193.136.60.172): No error: 0 Jun 3 15:32:38 ntpdate[54262]: adjust time server 194.117.9.136 offset 0.000048 sec Jun 3 15:32:38 ntp: Successfully synced time after 1 attempts. Jun 3 15:32:38 ntp: Starting NTP Daemon. Jun 3 15:32:38 ntpd[96136]: ntpd 4.2.7p443@1.2483-o Thu May 29 20:00:00 UTC 2014 (1): Starting Jun 3 15:32:38 ntpd[96136]: Command line: /usr/local/sbin/ntpd -g -c /var/etc/ntpd.conf -p /var/run/ntpd.pid Jun 3 15:32:38 ntpd[96437]: proto: precision = 0.500 usec (-21) Jun 3 15:32:38 ntpd[96437]: Listen and drop on 0 v6wildcard [::]:123 Jun 3 15:32:38 ntpd[96437]: Listen and drop on 1 v4wildcard 0.0.0.0:123 Jun 3 15:32:38 ntpd[96437]: Listen normally on 2 de0 [fe80::215:5dff:fe00:6412%1]:123 Jun 3 15:32:38 ntpd[96437]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6412%1 fails: Can't assign requested address Jun 3 15:32:38 ntpd[96437]: Listen normally on 3 de0 10.0.0.152:123 Jun 3 15:32:38 ntpd[96437]: Listen normally on 4 de1 192.168.1.1:123 Jun 3 15:32:38 ntpd[96437]: Listen normally on 5 de1 [fe80::215:5dff:fe00:6413%2]:123 Jun 3 15:32:38 ntpd[96437]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6413%2 fails: Can't assign requested address Jun 3 15:32:38 ntpd[96437]: Listen normally on 6 de2 [fe80::215:5dff:fe00:6414%3]:123 Jun 3 15:32:38 ntpd[96437]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6414%3 fails: Can't assign requested address Jun 3 15:32:38 ntpd[96437]: Listen normally on 7 lo0 127.0.0.1:123 Jun 3 15:32:38 ntpd[96437]: Listen normally on 8 lo0 [::1]:123 Jun 3 15:32:38 ntpd[96437]: Listen normally on 9 lo0 [fe80::1%6]:123 Jun 3 15:32:38 ntpd[96437]: setsockopt IPV6_MULTICAST_IF 0 for fe80::1%6 fails: Can't assign requested address Jun 3 15:32:38 ntpd[96437]: Listen normally on 10 pppoe0 192.168.3.81:123 Jun 3 15:32:38 ntpd[96437]: Listen normally on 11 pppoe0 [fe80::215:5dff:fe00:6412%8]:123 Jun 3 15:32:38 ntpd[96437]: setsockopt IPV6_MULTICAST_IF 0 for fe80::215:5dff:fe00:6412%8 fails: Can't assign requested address Jun 3 15:32:38 ntpd[96437]: Listening on routing socket on fd #32 for interface updates Jun 3 15:32:38 ntpd[96437]: refclock_open /dev/gps0: Is a directory Jun 3 15:32:38 ntpd[96437]: 127.127.20.0 local addr 127.0.0.1 -> <null> Jun 3 15:33:46 ntpd[96437]: ntpd exiting on signal 15 (Terminated) Jun 3 15:33:52 ntpdate[15630]: sendto(194.117.9.136): No error: 0 Jun 3 15:34:03 ntpdate[73276]: sendto(194.117.9.136): No error: 0</null></null></null>
Updating my home pfsense box. This is a hyper-v server can have some wan problems
Edited:
It works. In my VM i set-up my wan as DHCP, for some reason the interface connect and disconnect intermittently, maybe something to do with settings on VM legacy advanced options.Create a PPPoE server in my home box and configured VM box WAN interface type to PPPoE after that it work. One bug with PPPoE (at least), i have to save gateway settings to have internet, otherwise nothing. This happens in my home box to, in snapshots one or two weeks ago. Topic for another forum.
-
For those of us that don't have SSH, and the webgui doesn't work, is there anyway to update without a console connection? I'm guessing not, but thought I'd check.
-
No SSH, GUI or Console? Probably not.
If you have any one of the three you could run an update. SSH or console use option 13, then option 1, try 'auto' if that fails try the auto URL but with http instead of https.
Otherwise you'll need to get a new snap and then reinstall/reload the OS.