Suggestions for PFSense Build
-
Power consumption or noise any concern?
You want new hardware?Steve
-
Power consumption or noise any concern?
You want new hardware?Steve
hmmm power consumption isn't too big a priority and on the noise, It doesn't have to be silent, but it needs to be fairly quiet.
basically all I need in terms of suggestions is mobo+cpu+ram+nics.
and all I need is two nics one for wan, and one for LAN going to my gigabit switch.
-
Plenty of older server hardware on Ebay would meet your specs if you don't need it to be new. You'd need to choose carefully get a relatively quiet one though.
Steve
-
Plenty of older server hardware on Ebay would meet your specs if you don't need it to be new. You'd need to choose carefully get a relatively quiet one though.
Steve
yea I thought about eBay I think I may go all new.
I'll let you guys know what I come up with soon.
-
The processing requirement to get to 1Gbps throughput of firewall/NAT is not that large. There is an example Gigabit build here using a Celeron G530. You could easily build up something similar for <$400. You will need something more powerful than that if you want to run Squid/Squidguard as well. A faster harddrive and CPU but I don't really have any figures for how much faster. :-\ You should be able to do it well within your budget though.
Steve
-
Cool, I think then the retired HTPC I have will do the job then.
I also got to thinking, that there really is no point in doing squid with those kinda speeds.
Anywho I will need to get a couple Intel PCIe Nics but here are the specs of my (kinda) old HTPC
3GHz AMD A4-4000
4GB PC1600 DDR3 SDRAM
500GB 7200rpm HDD (I believe its a Seagate, can't remember though) -
The a4-4000 is hard to compare, there aren't any direct benchmarks for it I could find. However it appears to be closely matched with a Core2duo E6400. That is the case it's ~50% slower than the G530 so it may or may not be sufficient.
Steve
-
you could go with the Jetway NF9D-2550 , i am using it at home.
its solid, with a pci slot i have 2 more NIC for LAN.
handles alot of streaming / file backup traffic at the same time letting me maintain less than 180ms on Diablo 3.
rgds
-
An Atom D2550 will not get 1Gbps throughput, even without any packages.
Steve
-
for gigabit i would go for a dell power edge with xeon or an old HP server
I only have a 100M fiber, averaging out on 80-89M, this is sufficient foe me.
