Squid proxy
-
I also tried to restart the process, but still not work.
here is the screenshot of configuration. No clue in the access log…seems that after uninstall of squidguard not log in access.log :(Thanks a lot
-
Sorry, how does it fail again? Timeout or some error message right away?
Why do you use Google DNS for proxy server? Normally you select your forwarders under System - General Setup - DNS Servers. Is there any change if you remove 8.8.8.8 from Use alternate DNS…?
Perhaps your config is somehow corrupted. You can find directions on resetting everything in this post:
https://forum.pfsense.org/index.php?topic=78521.0
-
We get the message right away.
Thank you for the support.
I'll try to reset on Monday and will let you know… -
What message exactly are you getting? It is more helpful if you answer all of the questions you are asked. Why do you use Google DNS as an alternate just for the proxy?
-
i got this error
pf php: /pkg_edit.php: The command '/usr/pbi/squid-amd64/sbin/squid -k reconfigure -f /usr/pbi/squid-amd64/etc/squid/squid.conf' returned exit code '1', the output was 'squid: ERROR: No running copy'
-
Yeah, looks like something is broken. I would remove Squid and then use the link I gave you to do a cleanup, then try again.
-
We get "unable to connect to site xxxxxxx".
I set the dsn just to check if this could solve this problem,
thinking that for some reason the proxy needed an ulterior dsn, but it didn't help.I'll try the procedure you linked before.
-
OK, now I understand why you were using a separate DNS just for the proxy. As a suggestion, when you try something and it doesn't work, you should revert your change back or else you risk making the problem worse, or starting a new problem that will confuse you, or confusing people who are trying to help you 8)
Squid by itself is mainly used for caching web content, or as a base for SquidGuard, and it has very limited access control. You typically only need to check the Transparent and Allow users on interface boxes and it just works as long as your users are on the same subnet as your pfSense server. A default install of Squid will not block anything, last time I checked.
SquidGuard is the filtering component and it is more complex. Try to get basic Squid working first, and then move on to SquidGuard.
-
Goodmorning all!
thanks to KOM we managed to get Squid and SquidGuard works!
we followed the steps to remove the proxy and its settings, then reinstalled it.
a minimal configuration and now it works smoothly!
our steps:
- removed Squid and SquidGuard following the instructions https://forum.pfsense.org/index.php?topic=78521.0
- installed Squid (2.x)
- enable Transparent Proxy and let checked Allow User on Interface
- verified that Squid works adding a site in the blacklist
- installed SquidGuard
- added a blacklist
- started the service
- profit
thanks again for your support!
-
Glad to hear you got it working.
