LAN -> LAN2 issues with Failover.

sussox

Hi!

I have this setup:

WAN
WAN2
LAN 192.168.10.1/24
LAN2 192.168.40.1/24

WAN_TO_WAN2 is my Gateway Group for failover.

I have configured Failover and it works as intended. I can access internet from both LAN and LAN2, and it changes to WAN2 when i pull the plug on WAN.

However, as soon as i enable the disabled rules (the one that makes failover work) below, i lose the connectivity between LAN and LAN2, why? And what is needed to fix it?

![Screen Shot 2014-07-10 at 11.07.40.png](/public/imported_attachments/1/Screen Shot 2014-07-10 at 11.07.40.png)
![Screen Shot 2014-07-10 at 11.07.40.png_thumb](/public/imported_attachments/1/Screen Shot 2014-07-10 at 11.07.40.png_thumb)
![Screen Shot 2014-07-10 at 11.07.33.png](/public/imported_attachments/1/Screen Shot 2014-07-10 at 11.07.33.png)
![Screen Shot 2014-07-10 at 11.07.33.png_thumb](/public/imported_attachments/1/Screen Shot 2014-07-10 at 11.07.33.png_thumb)

ptt

Check this –> https://forum.pfsense.org/index.php?topic=75358

sussox

@ptt:

Check this –> https://forum.pfsense.org/index.php?topic=75358

Worked just fine! Thanks!