PfBlocker

BBcan177

That's odd.. did you check the firewall settings tab settings? If you don't see any alerts from pfblocker in the firewall log than greping from a shell won't get you anywhere.

When you hover over a rule that holds a pfblocker alias, does it show a list of ip addresses? Or check to see if in the Tables menu that the aliases have addresses?

If you have a block or reject rule on the LAN interface for a pfBlocker list, try to ping one of those addresses and see if it generates an alert in the firewall tab.

Maybe a reinstall of pfBlocker or start a new thread for this issue?

EDIT - if you want to grep the logs, grep for "block in on". If they alerts were there, they would also have the pfBlocker alias name (rule name)

grep -i "block in on" /var/log/*

splmachine

Yes, the alias do have a list of IPs (with the exception of 2 lists that were massive). I've removed the 2 lists that were acting up and confirmed both in the tables menu and by hovering over the aliases. I do have the LAN rules and while I cannot ping the IP's, no logs are generated from it. I have reinstalled pfBlocker before I started this thread but I'm going to wipe the settings and remove pfBlocker and then start fresh. I figured something isn't working properly since it seems everything is in order. Thanks for the pointers though.

BBcan177

If the blacklists are large, it can take a little longer to view the list as you hover over the rule. They are most likely working correctly.

st4t1c

I'm using pfblocker with a simple configuration and it might be the culprit for some wierd behavior i get in my network…

Configuration:

Inbound Interfaces: WAN
Inbound deny action: Block

Outbound Interfaces: LAN
Outbound deny action: Reject

Every list & country blocked is with "deny inbound".

Is the setting for the outbound interfaces needed if all the actual lists and countries are deny inbound only?...

i suspect pfblocked is blocking some valid outgoing traffic for a specific lan service (some outgoing sendmail) but i cant find anything in the logs.

This behavior only gets fixed after i restart the whole firewall, and works fine for about 10-15 days.After that, no outgoing mails are possible, till i restart the machine. Everything else seems to be working fine, only connections to the specific mail relay server.

Please give me some insight on what i should be looking for to fix the problem permanently.

BBcan177

The Country Codes is not being supported any longer and should not be used as it is Out of Date this functionality should be removed from the package. Hopefully pfBlocker will be getting a face lift in pfSense v 2.2.?

w1ll1am

Hello,

So I just installed pfBlocker and I am trying to find some good ad blocking lists. My comparison list(s) are from AdAway on Android which pulls from the below sites.

http://hosts-file.net/.%5Cad_servers.txt
http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts$showintro=0&mimetype=plaintext
http://winhelp2002.mvps.org/hosts.txt

The test site I am using to check the ad blocking is http://extreme.outervision.com/psucalculatorlite.jsp

When using AdAway on Android I don't get any ads along the sides/top of the above site. I tried using the Bluetrack ad list from here http://list.iblocklist.com/?list=dgxtneitpuvgqqcpfulq&fileformat=p2p&archiveformat=gz but I still get ads on the site.

Can pfblocker use a list of URLs or does it only do IP address? If it only does IP address I guess that is fine, I have made a bash script that will pull the lists from the AdAway sites and convert the URLs into IP address. My only issue with the script I have is I don't know of a way to convert all of the IP addresses into a smaller list of CDIR networks so I have just made each IP into its own network by adding a /32 which I am sure is an awful idea. So if anyone knows how to convert a huge amount of IP addresses into CDIR notation or if there is a way to use URLs with pfblocker can you please let me know. Thanks.

BBcan177

Hi w1ll1am,

These lists are all URL and can't be used by pfBlocker.

pfBlocker only accepts the following formats:

Note:
Compressed lists must be in gz format.
Downloaded or local file must have only one network per line and could follows PeerBlock syntax or this below:
Network ranges: 172.16.1.0-172.16.1.255
IP Address: 172.16.1.10
CIDR: 172.16.1.0/24

pfBlocker already can accept the IBlock lists without any conversion (as they are in a range format already), but the following will also convert the file which you could link pfBlocker to a local txt file.

The following will download and convert that file to a range acceptable by pfBlocker.

fetch -v -o infile.gz -T 20 ?list=dgxtneitpuvgqqcpfulq&fileformat=p2p&archiveformat=gz
gunzip infile.gz

cat infile | cut -d':' -f2

I posted several lists here:

https://forum.pfsense.org/index.php?topic=73353.msg402927#msg402927

w1ll1am

Thanks BBcan17. Those lists look good I will use some of them. I managed to get my script to work with the AdAway lists.

I have posted it on paste bin http://pastebin.com/xJYz9qgW
I have also posted the cleaned up list of URLs from those three sites http://pastebin.com/vFbA20CG which will make the script much quicker if you pass it into the script at run time, it will only update newly added sites. Which you could then add the new IP address to the IP list for those URLs as of 5/23 http://pastebin.com/f3kUW3ar

There are about 10000 IP address and they seem to be blocking a ton of traffic

I have not tested it a lot but I have noticed some sites that are blocked that shouldn't be like unix.stackexchange.com ( already removed from the pastebin IP list )

please excuse my poor bash code.

![Screenshot - 05232014 - 11:10:29 AM.png](/public/imported_attachments/1/Screenshot - 05232014 - 11:10:29 AM.png)
![Screenshot - 05232014 - 11:10:29 AM.png_thumb](/public/imported_attachments/1/Screenshot - 05232014 - 11:10:29 AM.png_thumb)

BBcan177

Hi w1ll1am,

Spammers must die! There is also a website called "Phishtank" that has Phishing URL's posted also.

I think you might get some false positives with this method. As some of these hosts are actually hosted by Big ISP's.

These URLs would be better suited for DNS lookup blocking methods (hosts file). Need to find a way to weed out the false positives.

I would like to have this accomplished on my MS Active Directory DNS server so that it can handle all of the workstations it manages and filter out DNS requests to these URLS. It would be a good addition to the DNS Forwarder/BIND etc packages in pfSense also.

I pulled some of the hosts from the first link and ran a Dig command. It shows as Yahoo.

[1]
dig +short ypn-js.overture.com
us.srv.ysm.yahoodns.net.
98.139.225.108

[2]
dig +short 13.ptp22.com
50.62.128.39

IPVOID shows it being Registered by GoDaddy.
http://www.ipvoid.com/scan/50.62.128.39/

[3]
dig +short admeld.com

Google

173.194.43.97
173.194.43.103
173.194.43.98
173.194.43.105
173.194.43.110
173.194.43.101
173.194.43.99
173.194.43.100
173.194.43.102
173.194.43.96
173.194.43.104

http://kb.bothunter.net/ipInfo/nowait.php?IP=173.194.43.97

Mr. Jingles

@phil.davis:

I just made a URL Table Alias with http://doc.emergingthreats.net/pub/Main/RussianBusinessNetwork/RussianBusinessNetworkIPs.txt on a 2.1-RELEASE Alix nanoBSD. The table loads into pf with 9252 entries. Used it as source in a block rule on WAN and it works. So the list itself is not bad. And you can easily use it anyway without pfBlocker, just using the ordinary URL Table Alias and Firewall Rules features of pfSense.

I still have this list in my firewall rules. But to date it still has the 9252 IP's so I assume it has never been updated since last year. As I am working on the new thread of JFL (https://forum.pfsense.org/index.php?topic=78062.0), I was wondering, are all instructions in this thread obsolete (so I should also delete this large IP-list?)

kevin067

I have been using pfblocker for over a year now. I consider pfBlocker and Snort combo an essential part of a firewall. PFBlocker successfully removes entire countries such as China removing about 80% of the intrusions and Snort takes care of the rest, and handles exotic things such as detecting port scanning. Ever since, I have had zero problems with real intrusions into my network.

After making intense use of it to also handle my whitelists and blacklists (because it likes to re-order the rules otherwise) I find it convenient that shows me in the dashboard the status and blocks with labels in the firewall log.

I wish though that I could selectively set the logging flag because if I choose logging for black lists, I end up getting the blocked country also.

I do not want to use an alias or to create these rules manually in the rules because I want pfblocker to manage them so I can see this in the dashboard. And it re-orders the rules if it doesn't manage them itself. Also when I have problems I can mass disable all the block rules from pfblocker so I can diagnose who is generating the false positive.

Very simple change I hope.
Thanks,
Kevin

MarkVLK

I have logging enabled in pfBlocker but I never see anything in the system logs even when I see that the pfBlocker widget has blocked some packets. Any idea what I may need to change to remedy this problem?

Also, is there any way to have it persist the stats, e.g. how many packets it blocks? Looks like every time the firewall filter gets reloaded, the pfBlocker widget goes back to showing all 0's for the number of packets it has blocked.

Cino

logging means that the blocks/rejects will show up in your firewall log, not your system log. If you click on the red/yellow X, it should tell you which rule was triggered.

persist stats would be great but the system grabs the stats directly from the rules in realtime. That is why is why they reset to 0 when your rules are reloaded.

Supermule

Any news on where to find updated lists??

Cino

@Supermule:

Any news on where to find updated lists??

check out this thread https://forum.pfsense.org/index.php?topic=78062.msg426417#msg426417 its a great script but if you prefer to use pfBlocker, you can grab some of the list from it.. Just make sure the list is compilable with pfBlocker

BBcan177

@kevin067:

I have been using pfblocker for over a year now. I consider pfBlocker and Snort combo an essential part of a firewall. PFBlocker successfully removes entire countries such as China

Hi Kevin,

The Country Database in pfBlocker hasn't been updated for over 2 years now. The data is obsolete. I know they are working on a new service (most likely for paid members) that will provide updates for the Country Lists.

I have written a script that does what pfBlocker does but with a lot of other missing features. You can see more details in the following link:

Its a long forum post, so you need to read all of its posts in their entirety.
https://forum.pfsense.org/index.php?topic=78062.msg426963#msg426963

I also wrote a patch for the pfBlocker widget to show when the Alias was last updated and indication of any download failures.

I also write a patch for diag_dns.php which is the "Firewall Log" GUI Screen. This update has the ability to show which Blocklist (Irevelent of the Alias) caused the Block. So even if the Filter Logs clear, you can easily find the IP/Blocklist match. This can also be used from Snort, when you click on the "!" icon which will show you if any of the Snort Alerts are on any of your Blocklists. It will actually show you if any of the IPs are founded in the Alerted IPs Range.

I would recommend that you use "Aliases" as they give you more control than the method that you are currently using.

BBcan177

@Hollander:

@phil.davis:

I just made a URL Table Alias with http://doc.emergingthreats.net/pub/Main/RussianBusinessNetwork/RussianBusinessNetworkIPs.txt on a 2.1-RELEASE Alix nanoBSD. The table loads into pf with 9252 entries. Used it as source in a block rule on WAN and it works. So the list itself is not bad. And you can easily use it anyway without pfBlocker, just using the ordinary URL Table Alias and Firewall Rules features of pfSense.

I still have this list in my firewall rules. But to date it still has the 9252 IP's so I assume it has never been updated since last year. As I am working on the new thread of JFL (https://forum.pfsense.org/index.php?topic=78062.0), I was wondering, are all instructions in this thread obsolete (so I should also delete this large IP-list?)

Hi Hollander,

the ET RBN list has been discontinued. Along with the RBN malvertisers list.

Emerging Threats RBN rules.

THIS RULESET HAS BEEN OBSOLETED!! This file is left to simply note this fact.

More information available at doc.emergingthreats.net/bin/view/Main/RussianBusinessNetwork

Please submit any feedback or ideas to emerging@emergingthreats.net or the emerging-sigs mailing list

kenshirothefist

First of all, pfBlocker is a great package, cheers to the authors! However, it would be very useful (some users already highlighted this) to have more options for "Update frequency". Specifically I would like to see one very short and one longer frequency, like "Every 10 Minutes" and "Once a week". Could you add this?

And just out of curiosity, how is this updating handled, I don't see any crontab entry for pfBlocker?

Mr. Jingles

@BBcan177:

Hi Hollander,

the ET RBN list has been discontinued. Along with the RBN malvertisers list.

Thank you Sir ;D

Mr. Jingles

@BBcan177:

The Country Database in pfBlocker hasn't been updated for over 2 years now. The data is obsolete. I know they are working on a new service (most likely for paid members) that will provide updates for the Country Lists.

I have written a script that does what pfBlocker does but with a lot of other missing features. You can see more details in the following link:

I am prollally stupid once again, BB, but I can't seem to find how to do country blocking with your script. I know it is possible, but have I missed something? I want to block a great deal of countries I consider nothing good to come from ( 8) ;D ). If I overlooked something, could you please point me to the text I must have overlooked?

Thank you ;D