Cant assign to AD3INLANG Intel 8254 1PI nics
-
I don't any Ethernet devices other than the on-board Realtek controller in that list. ???
Steve
-
ya showed up once and now not coming back up…..
I contacted the company 2 days ago and they said they will replace the unit. Im going to go through with the exchange. They have a realtek board aswell, should i switch to the other board or stick with intel? ive use intel nics on pci 1x many times and have had no problems.
-
I'd go with Intel over Realtek if at all possible. In all likelihood you won't see much difference unless they are pushed hard.
Steve
-
so im bringing this thread back to life after some down time.
the daughter card was sent in and returned but still no luck. I ran "pciconf -lv" and still only have the one ethernet port appearing. Only thing i can think of now is that the mobo in the actual computer is still messed up. Im going to email the company again and see what they say.
-
This sort of flakiness is exactly why I don't use Jetway products any more. When they work they're great but they don't exactly have a reputation for reliability…
-
The company asked me to try installing Windows 7 and still nothing. This also defeats the purpose of the box as I don't want it running Windows then vmware and then pfsense in that. Has any one had luck with this box or recommend a different one from the ones provided by this company; http://www.mitxpc.com .
I was going to use this for my whole network but I'll take a box that has only two nics as I need it to vpn my torrenting. -
If it's not showing up in the POST it doesn't matter what OS you boot. The daughter board simply isn't connected correctly.
Steve
-
Tried explaining that to the sales rep but apparently that's too hard for them to comprehend that.
-
im sending my unit back and getting a cheaper unit that just has 2 intel nics attacked to the mobo.
http://www.mitxpc.com/proddetail.asp?prod=EKIAD2500DL&cat=209
Hopefully ill have better luck with this model.
-
I just bought exactly the same unit for my home with an intel daughtercard. Working great. Perhaps they should replace the main unit. Seating the card required some care and some force.
re0@pci0:2:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x03 hdr=0x00
class = network
subclass = ethernet
em0@pci0:4:4:0: class=0x020000 card=0x10768086 chip=0x10768086 rev=0x05 hdr=0x00
class = network
subclass = ethernet
em1@pci0:4:6:0: class=0x020000 card=0x10768086 chip=0x10768086 rev=0x05 hdr=0x00
class = network
subclass = ethernet
em2@pci0:4:7:0: class=0x020000 card=0x10768086 chip=0x10768086 rev=0x05 hdr=0x00
class = network
subclass = ethernet -
i just took the card out and put it back in one more time before going through with the return, but no luke. I also asked if they would test my next unit if i send them pfsense on a usb.
-
Is there anything in the bios about enabling or disabling that PCI "slot"? Any of the pins get bent or anything?
