Squid3-dev v3.3.10 pkg 2.2.6,SSL MiM + Diladele = c-icap no file scanning

[marian78]

hi i have instaled pfsense v2.1.4 i386 with this packages:
squid3-dev v3.3.10 pkg 2.2.6, working SSL man in the middle for filtering HTTPS
snort 2.9.6.2 pkg v3.1.1
pfblocker 1.0.2

All working well (included eicar test http://www.eicar.org/85-0-Download.html  file scaning with c-icap) without instaled diladele ( http://docs.diladele.com/administrator_guide_3_4/installation_and_removal/install_on_freebsd.html).

When i instal Diladele  ( http://docs.diladele.com/administrator_guide_3_4/installation_and_removal/install_on_freebsd.html and add 'always_direct allow all; ssl_bump server-first all' to squid config), then i can filter https, http but scaning downloaded file (for examle exe, zip, com, txt) with virus scanner not working.

Can you pleas link me to some solution?

Thx,

Marian L.

[marian78]

ok, today i make some research and find how to chaining diladele and c-icap for filtering https and scaning downloaded files. I change /usr/pbi/squid-i386/etc/squid/squid.conf (problem is, i dont for now, how to make changes permanent:

chanched in squid.conf (also changet listening port in antivirus settings in pfsense UI to 1345):

# Custom options before auth
always_direct allow all
ssl_bump server-first all
icap_enable on
icap_preview_enable on
icap_preview_size 4096
icap_persistent_connections on
icap_send_client_ip on
icap_send_client_username on
icap_client_username_header X-Client-Username
icap_service service_req reqmod_precache bypass=0 icap://127.0.0.1:1345/squidclamav
icap_service service_resp respmod_precache bypass=0 icap://127.0.0.1:1345/squidclamav
icap_service qlproxy1 reqmod_precache bypass=0 icap://127.0.0.1:1344/reqmod
icap_service qlproxy2 respmod_precache bypass=0 icap://127.0.0.1:1344/respmod
acl qlproxy_icap_edomains dstdomain "/opt/qlproxy/etc/squid/icap_exclusions_domains.conf"
acl qlproxy_icap_etypes rep_mime_type "/opt/qlproxy/etc/squid/icap_exclusions_contenttypes.conf"
adaptation_access qlproxy1 deny qlproxy_icap_edomains
adaptation_access qlproxy2 deny qlproxy_icap_edomains
adaptation_access qlproxy2 deny qlproxy_icap_etypes
adaptation_access qlproxy1 allow all
adaptation_access qlproxy2 allow all
adaptation_access service_req allow all
adaptation_access service_resp allow all

#icap_enable on
#icap_send_client_ip on
#icap_send_client_username on 
#icap_client_username_encode off
#icap_client_username_header X-Authenticated-User
#icap_preview_enable on
#icap_preview_size 1024

# Always allow access to whitelist domains
http_access allow whitelist
acl sglog url_regex -i sgr=ACCESSDENIED
http_access deny sglog
# Setup allowed acls
# Allow local network(s) on interface(s)
http_access allow allowed_subnets
http_access allow localnet
# Default block all to be sure
http_access deny allsrc

squid.conf after:

# This file is automatically generated by pfSense
# Do not edit manually !

http_port 192.168.20.1:3128 ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=10MB cert=/usr/pbi/squid-i386/etc/squid/serverkey.pem capath=/usr/pbi/squid-i386/share/certs/

icp_port 0
dns_v4_first on
pid_filename /var/run/squid.pid
cache_effective_user proxy
cache_effective_group proxy
error_default_language sk
icon_directory /usr/pbi/squid-i386/etc/squid/icons
visible_hostname localhost
cache_mgr xxxxx@xxx.com
access_log /var/squid/logs/access.log
cache_log /var/squid/logs/cache.log
cache_store_log none
netdb_filename /var/squid/logs/netdb.state
pinger_enable on
pinger_program /usr/pbi/squid-i386/libexec/squid/pinger
sslcrtd_program /usr/pbi/squid-i386/libexec/squid/ssl_crtd -s /var/squid/lib/ssl_db -M 4MB -b 2048
sslcrtd_children 5
sslproxy_capath /usr/pbi/squid-i386/share/certs/

logfile_rotate 90
debug_options rotate=90
shutdown_lifetime 3 seconds
# Allow local network(s) on interface(s)
acl localnet src  192.168.20.0/24
httpd_suppress_version_string on
uri_whitespace strip

# Break HTTP standard for flash videos. Keep them in cache even if asked not to.
refresh_pattern -i \.flv$ 10080 90% 999999 ignore-no-cache override-expire ignore-private

# Let the clients favorite video site through with full caching
acl youtube dstdomain .youtube.com
cache allow youtube

# Windows Update refresh_pattern
range_offset_limit -1
refresh_pattern -i microsoft.com/.*\.(cab|exe|ms[i|u|f]|asf|wm[v|a]|dat|zip) 4320 80% 43200 reload-into-ims
refresh_pattern -i windowsupdate.com/.*\.(cab|exe|ms[i|u|f]|asf|wm[v|a]|dat|zip) 4320 80% 43200 reload-into-ims
refresh_pattern -i windows.com/.*\.(cab|exe|ms[i|u|f]|asf|wm[v|a]|dat|zip) 4320 80% 43200 reload-into-ims

# Symantec refresh_pattern
range_offset_limit -1
refresh_pattern liveupdate.symantecliveupdate.com/.*\.(cab|exe|dll|msi) 10080 100% 43200 reload-into-ims
refresh_pattern symantecliveupdate.com/.*\.(cab|exe|dll|msi) 10080 100% 43200 reload-into-ims

cache_mem 256 MB
maximum_object_size_in_memory 512 KB
memory_replacement_policy heap GDSF
cache_replacement_policy heap LFUDA
cache_dir aufs /var/squid/cache 100 32 256
minimum_object_size 0 KB
maximum_object_size 10485760 KB
offline_mode off
cache_swap_low 90
cache_swap_high 95
cache allow all

# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp:    1440  20%  10080
refresh_pattern ^gopher:  1440  0%  1440
refresh_pattern -i (/cgi-bin/|\?) 0  0%  0
refresh_pattern .    0  20%  4320

# No redirector configured

#Remote proxies

# Setup some default acls
# From 3.2 further configuration cleanups have been done to make things easier and safer. The manager, localhost, and to_localhost ACL definitions are now built-in.
# acl localhost src 127.0.0.1/32
acl allsrc src all
acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901  3128 3127 1025-65535 
acl sslports port 443 563  

# From 3.2 further configuration cleanups have been done to make things easier and safer. The manager, localhost, and to_localhost ACL definitions are now built-in.
#acl manager proto cache_object

acl purge method PURGE
acl connect method CONNECT

# Define protocols used for redirects
acl HTTP proto HTTP
acl HTTPS proto HTTPS
acl allowed_subnets src 192.168.20.0/24
acl whitelist dstdom_regex -i "/var/squid/acl/whitelist.acl"
http_access allow manager localhost

http_access deny manager
http_access allow purge localhost
http_access deny purge
http_access deny !safeports
http_access deny CONNECT !sslports

# Always allow localhost connections
# From 3.2 further configuration cleanups have been done to make things easier and safer. 
# The manager, localhost, and to_localhost ACL definitions are now built-in.
# http_access allow localhost

quick_abort_min -1 KB
quick_abort_max 0 KB
request_body_max_size 0 KB
delay_pools 1
delay_class 1 2
delay_parameters 1 -1/-1 -1/-1
delay_initial_bucket_level 100
delay_access 1 allow allsrc

# Reverse Proxy settings

always_direct allow whitelist
ssl_bump none whitelist

# Custom options before auth
always_direct allow all
ssl_bump server-first all
icap_enable on
icap_preview_enable on
icap_preview_size 4096
icap_persistent_connections on
icap_send_client_ip on
icap_send_client_username on
icap_client_username_header X-Client-Username
icap_service service_req reqmod_precache bypass=0 icap://127.0.0.1:1345/squidclamav
icap_service service_resp respmod_precache bypass=0 icap://127.0.0.1:1345/squidclamav
icap_service qlproxy1 reqmod_precache bypass=0 icap://127.0.0.1:1344/reqmod
icap_service qlproxy2 respmod_precache bypass=0 icap://127.0.0.1:1344/respmod
acl qlproxy_icap_edomains dstdomain "/opt/qlproxy/etc/squid/icap_exclusions_domains.conf"
acl qlproxy_icap_etypes rep_mime_type "/opt/qlproxy/etc/squid/icap_exclusions_contenttypes.conf"
adaptation_access qlproxy1 deny qlproxy_icap_edomains
adaptation_access qlproxy2 deny qlproxy_icap_edomains
adaptation_access qlproxy2 deny qlproxy_icap_etypes
adaptation_access qlproxy1 allow all
adaptation_access qlproxy2 allow all
adaptation_access service_req allow all
adaptation_access service_resp allow all

#icap_enable on
#icap_send_client_ip on
#icap_send_client_username on 
#icap_client_username_encode off
#icap_client_username_header X-Authenticated-User
#icap_preview_enable on
#icap_preview_size 1024

# Always allow access to whitelist domains
http_access allow whitelist
acl sglog url_regex -i sgr=ACCESSDENIED
http_access deny sglog
# Setup allowed acls
# Allow local network(s) on interface(s)
http_access allow allowed_subnets
http_access allow localnet
# Default block all to be sure
http_access deny allsrc

and some settings in clamd.conf (enable archive scanning and executable). I dont know if this help for scaning files, but i made it….

##
## Example config file for the Clam AV daemon
## Please read the clamd.conf(5) manual before editing this file.
##

# Comment or remove the line below.
#Example

# Uncomment this option to enable logging.
# LogFile must be writable for the user running daemon.
# A full path is required.
# Default: disabled
LogFile /var/log/clamav/clamd.log

# By default the log file is locked for writing - the lock protects against
# running clamd multiple times (if want to run another clamd, please
# copy the configuration file, change the LogFile variable, and run
# the daemon with --config-file option).
# This option disables log file locking.
# Default: no
#LogFileUnlock yes

# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
# in bytes just don't use modifiers. If LogFileMaxSize is enabled, log
# rotation (the LogRotate option) will always be enabled.
# Default: 1M
LogFileMaxSize 2M

# Log time with each message.
# Default: no
LogTime yes

# Also log clean files. Useful in debugging but drastically increases the
# log size.
# Default: no
#LogClean yes

# Use system logger (can work together with LogFile).
# Default: no
LogSyslog yes

# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL

# Enable verbose logging.
# Default: no
#LogVerbose yes

# Enable log rotation. Always enabled when LogFileMaxSize is enabled.
# Default: no
LogRotate yes

# Log additional information about the infected file, such as its
# size and hash, together with the virus name.
ExtendedDetectionInfo yes

# This option allows you to save a process identifier of the listening
# daemon (main thread).
# Default: disabled
PidFile /var/run/clamav/clamd.pid

# Optional path to the global temporary directory.
# Default: system specific (usually /tmp or /var/tmp).
#TemporaryDirectory /var/tmp

# Path to the database directory.
# Default: hardcoded (depends on installation options)
DatabaseDirectory /var/db/clamav

# Only load the official signatures published by the ClamAV project.
# Default: no
#OfficialDatabaseOnly no

# The daemon can work in local mode, network mode or both. 
# Due to security reasons we recommend the local mode.

# Path to a local socket file the daemon will listen on.
# Default: disabled (must be specified by a user)
LocalSocket /var/run/clamav/clamd.sock

# Sets the group ownership on the unix socket.
# Default: disabled (the primary group of the user running clamd)
#LocalSocketGroup virusgroup

# Sets the permissions on the unix socket to the specified mode.
# Default: disabled (socket is world accessible)
#LocalSocketMode 660

# Remove stale socket after unclean shutdown.
# Default: yes
FixStaleSocket yes

# TCP port address.
# Default: no
#TCPSocket 3310

# TCP address.
# By default we bind to INADDR_ANY, probably not wise.
# Enable the following to provide some degree of protection
# from the outside world.
# Default: no
#TCPAddr 127.0.0.1

# Maximum length the queue of pending connections may grow to.
# Default: 200
#MaxConnectionQueueLength 30

# Clamd uses FTP-like protocol to receive data from remote clients.
# If you are using clamav-milter to balance load between remote clamd daemons
# on firewall servers you may need to tune the options below.

# Close the connection when the data size limit is exceeded.
# The value should match your MTA's limit for a maximum attachment size.
# Default: 25M
#StreamMaxLength 10M

# Limit port range.
# Default: 1024
#StreamMinPort 30000
# Default: 2048
#StreamMaxPort 32000

# Maximum number of threads running at the same time.
# Default: 10
MaxThreads 20

# Waiting for data from a client socket will timeout after this time (seconds).
# Default: 120
#ReadTimeout 300

# This option specifies the time (in seconds) after which clamd should
# timeout if a client doesn't provide any initial command after connecting.
# Default: 5
#CommandReadTimeout 5

# This option specifies how long to wait (in miliseconds) if the send buffer is full.
# Keep this value low to prevent clamd hanging
#
# Default: 500
#SendBufTimeout 200

# Maximum number of queued items (including those being processed by MaxThreads threads)
# It is recommended to have this value at least twice MaxThreads if possible.
# WARNING: you shouldn't increase this too much to avoid running out  of file descriptors,
# the following condition should hold:
# MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE (usual max is 1024)
#
# Default: 100
#MaxQueue 200

# Waiting for a new job will timeout after this time (seconds).
# Default: 30
#IdleTimeout 60

# Don't scan files and directories matching regex
# This directive can be used multiple times
# Default: scan all
#ExcludePath ^/proc/
#ExcludePath ^/sys/

# Maximum depth directories are scanned at.
# Default: 15
MaxDirectoryRecursion 15

# Follow directory symlinks.
# Default: no
#FollowDirectorySymlinks yes

# Follow regular file symlinks.
# Default: no
#FollowFileSymlinks yes

# Scan files and directories on other filesystems.
# Default: yes
#CrossFilesystems yes

# Perform a database check.
# Default: 600 (10 min)
#SelfCheck 600

# Execute a command when virus is found. In the command string %v will
# be replaced with the virus name.
# Default: no
#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v"

# Run as another user (clamd must be started by root for this option to work)
# Default: don't drop privileges
User clamav

# Initialize supplementary group access (clamd must be started by root).
# Default: no
AllowSupplementaryGroups yes

# Stop daemon when libclamav reports out of memory condition.
#ExitOnOOM yes

# Don't fork into background.
# Default: no
#Foreground yes

# Enable debug messages in libclamav.
# Default: no
#Debug yes

# Do not remove temporary files (for debug purposes).
# Default: no
#LeaveTemporaryFiles yes

# Permit use of the ALLMATCHSCAN command. If set to no, clamd will reject
# any ALLMATCHSCAN command as invalid.
# Default: yes
#AllowAllMatchScan no

# Detect Possibly Unwanted Applications.
# Default: no
DetectPUA yes

# Exclude a specific PUA category. This directive can be used multiple times.
# See http://www.clamav.net/support/pua for the complete list of PUA
# categories.
# Default: Load all categories (if DetectPUA is activated)
#ExcludePUA NetTool
#ExcludePUA PWTool

# Only include a specific PUA category. This directive can be used multiple
# times.
# Default: Load all categories (if DetectPUA is activated)
#IncludePUA Spy
#IncludePUA Scanner
#IncludePUA RAT

# In some cases (eg. complex malware, exploits in graphic files, and others),
# ClamAV uses special algorithms to provide accurate detection. This option
# controls the algorithmic detection.
# Default: yes
AlgorithmicDetection yes

##
## Executable files
##

# PE stands for Portable Executable - it's an executable file format used
# in all 32 and 64-bit versions of Windows operating systems. This option allows
# ClamAV to perform a deeper analysis of executable files and it's also
# required for decompression of popular executable packers such as UPX, FSG,
# and Petite. If you turn off this option, the original files will still be
# scanned, but without additional processing.
# Default: yes
ScanPE yes

# Certain PE files contain an authenticode signature. By default, we check
# the signature chain in the PE file against a database of trusted and
# revoked certificates if the file being scanned is marked as a virus.
# If any certificate in the chain validates against any trusted root, but
# does not match any revoked certificate, the file is marked as whitelisted.
# If the file does match a revoked certificate, the file is marked as virus.
# The following setting completely turns off authenticode verification.
# Default: no
#DisableCertCheck yes

# Executable and Linking Format is a standard format for UN*X executables.
# This option allows you to control the scanning of ELF files.
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
# Default: yes
#ScanELF yes

# With this option clamav will try to detect broken executables (both PE and
# ELF) and mark them as Broken.Executable.
# Default: no
#DetectBrokenExecutables yes

##
## Documents
##

# This option enables scanning of OLE2 files, such as Microsoft Office
# documents and .msi files.
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
# Default: yes
ScanOLE2 yes

# With this option enabled OLE2 files with VBA macros, which were not
# detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros".
# Default: no
#OLE2BlockMacros no

# This option enables scanning within PDF files.
# If you turn off this option, the original files will still be scanned, but
# without decoding and additional processing.
# Default: yes
ScanPDF yes

# This option enables scanning within SWF files.
# If you turn off this option, the original files will still be scanned, but
# without decoding and additional processing.
# Default: yes
ScanSWF yes

##
## Mail files
##

# Enable internal e-mail scanner.
# If you turn off this option, the original files will still be scanned, but
# without parsing individual messages/attachments.
# Default: yes
ScanMail yes

# Scan RFC1341 messages split over many emails.
# You will need to periodically clean up $TemporaryDirectory/clamav-partial directory.
# WARNING: This option may open your system to a DoS attack.
#	   Never use it on loaded servers.
# Default: no
ScanPartialMessages yes

# With this option enabled ClamAV will try to detect phishing attempts by using
# signatures.
# Default: yes
PhishingSignatures yes

# Scan URLs found in mails for phishing attempts using heuristics.
# Default: yes
PhishingScanURLs yes

# Always block SSL mismatches in URLs, even if the URL isn't in the database.
# This can lead to false positives.
#
# Default: no
#PhishingAlwaysBlockSSLMismatch no

# Always block cloaked URLs, even if URL isn't in database.
# This can lead to false positives.
#
# Default: no
#PhishingAlwaysBlockCloak no

# Allow heuristic match to take precedence.
# When enabled, if a heuristic scan (such as phishingScan) detects
# a possible virus/phish it will stop scan immediately. Recommended, saves CPU
# scan-time.
# When disabled, virus/phish detected by heuristic scans will be reported only at
# the end of a scan. If an archive contains both a heuristically detected
# virus/phish, and a real malware, the real malware will be reported
#
# Keep this disabled if you intend to handle "*.Heuristics.*" viruses 
# differently from "real" malware.
# If a non-heuristically-detected virus (signature-based) is found first, 
# the scan is interrupted immediately, regardless of this config option.
#
# Default: no
#HeuristicScanPrecedence yes

##
## Data Loss Prevention (DLP)
##

# Enable the DLP module
# Default: No
#StructuredDataDetection yes

# This option sets the lowest number of Credit Card numbers found in a file
# to generate a detect.
# Default: 3
#StructuredMinCreditCardCount 5

# This option sets the lowest number of Social Security Numbers found
# in a file to generate a detect.
# Default: 3
#StructuredMinSSNCount 5

# With this option enabled the DLP module will search for valid
# SSNs formatted as xxx-yy-zzzz
# Default: yes
#StructuredSSNFormatNormal yes

# With this option enabled the DLP module will search for valid
# SSNs formatted as xxxyyzzzz
# Default: no
#StructuredSSNFormatStripped yes

##
## HTML
##

# Perform HTML normalisation and decryption of MS Script Encoder code.
# Default: yes
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
ScanHTML yes

##
## Archives
##

# ClamAV can scan within archives and compressed files.
# If you turn off this option, the original files will still be scanned, but
# without unpacking and additional processing.
# Default: yes
ScanArchive yes

# Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
# Default: no
ArchiveBlockEncrypted no

##
## Limits
##

# The options below protect your system against Denial of Service attacks
# using archive bombs.

# This option sets the maximum amount of data to be scanned for each input file.
# Archives and other containers are recursively extracted and scanned up to this
# value.
# Value of 0 disables the limit
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 100M
MaxScanSize 150M

# Files larger than this limit won't be scanned. Affects the input file itself
# as well as files contained inside it (when the input file is an archive, a
# document or some other kind of container).
# Value of 0 disables the limit.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 25M
MaxFileSize 30M

# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
# file, all files within it will also be scanned. This options specifies how
# deeply the process should be continued.
# Note: setting this limit too high may result in severe damage to the system.
# Default: 16
MaxRecursion 10

# Number of files to be scanned within an archive, a document, or any other
# container file.
# Value of 0 disables the limit.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 10000
MaxFiles 15000

# Maximum size of a file to check for embedded PE. Files larger than this value
# will skip the additional analysis step.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 10M
MaxEmbeddedPE 10M

# Maximum size of a HTML file to normalize. HTML files larger than this value
# will not be normalized or scanned.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 10M
MaxHTMLNormalize 10M

# Maximum size of a normalized HTML file to scan. HTML files larger than this
# value after normalization will not be scanned.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 2M
MaxHTMLNoTags 2M

# Maximum size of a script file to normalize. Script content larger than this
# value will not be normalized or scanned.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 5M
MaxScriptNormalize 5M

# Maximum size of a ZIP file to reanalyze type recognition. ZIP files larger
# than this value will skip the step to potentially reanalyze as PE.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 1M
MaxZipTypeRcg 1M

##
## Clamuko settings
##

# Enable Clamuko. Dazuko must be configured and running. Clamuko supports
# both Dazuko (/dev/dazuko) and DazukoFS (/dev/dazukofs.ctrl). DazukoFS
# is the preferred option. For more information please visit www.dazuko.org
# Default: no
#ClamukoScanOnAccess yes

# The number of scanner threads that will be started (DazukoFS only).
# Having multiple scanner threads allows Clamuko to serve multiple
# processes simultaneously. This is particularly beneficial on SMP machines.
# Default: 3
#ClamukoScannerCount 3

# Don't scan files larger than ClamukoMaxFileSize
# Value of 0 disables the limit.
# Default: 5M
#ClamukoMaxFileSize 10M

# Set access mask for Clamuko (Dazuko only).
# Default: no
#ClamukoScanOnOpen yes
#ClamukoScanOnClose yes
#ClamukoScanOnExec yes

# Set the include paths (all files inside them will be scanned). You can have
# multiple ClamukoIncludePath directives but each directory must be added
# in a seperate line. (Dazuko only)
# Default: disabled
#ClamukoIncludePath /home
#ClamukoIncludePath /students

# Set the exclude paths. All subdirectories are also excluded. (Dazuko only)
# Default: disabled
#ClamukoExcludePath /home/bofh

# With this option you can whitelist specific UIDs. Processes with these UIDs
# will be able to access all files.
# This option can be used multiple times (one per line).
# Default: disabled
#ClamukoExcludeUID 0

# With this option enabled ClamAV will load bytecode from the database. 
# It is highly recommended you keep this option on, otherwise you'll miss detections for many new viruses.
# Default: yes
#Bytecode yes

# Set bytecode security level.
# Possible values:
#       None - no security at all, meant for debugging. DO NOT USE THIS ON PRODUCTION SYSTEMS
#         This value is only available if clamav was built with --enable-debug!
#       TrustSigned - trust bytecode loaded from signed .c[lv]d files,
#                insert runtime safety checks for bytecode loaded from other sources
#       Paranoid - don't trust any bytecode, insert runtime checks for all
# Recommended: TrustSigned, because bytecode in .cvd files already has these checks
# Note that by default only signed bytecode is loaded, currently you can only
# load unsigned bytecode in --enable-debug mode.
#
# Default: TrustSigned
#BytecodeSecurity TrustSigned

# Set bytecode timeout in miliseconds.
# 
# Default: 5000
# BytecodeTimeout 1000

[marian78]

huh, reply to myself  :P …..

ok, permanent changes can make via pfsense UI.

1. set listening port "Antivirus" in "c-icap.conf" to "Port 1345"

2. set this in Custom ACLS (Before_Auth), with help of Diladele support:

always_direct allow all
ssl_bump server-first all
icap_enable on
icap_preview_enable on
icap_preview_size 4096
icap_persistent_connections on
icap_send_client_ip on
icap_send_client_username on
icap_client_username_header X-Client-Username

icap_service qlproxy1 reqmod_precache routing=0 bypass=0 icap://127.0.0.1:1344/reqmod
icap_service qlproxy2 respmod_precache routing=0 bypass=0 icap://127.0.0.1:1344/respmod

icap_service service_req reqmod_precache routing=0 bypass=0 icap://127.0.0.1:1345/squidclamav
icap_service service_resp respmod_precache routing=0 bypass=0 icap://127.0.0.1:1345/squidclamav

acl qlproxy_icap_edomains dstdomain "/opt/qlproxy/etc/squid/icap_exclusions_domains.conf"
acl qlproxy_icap_etypes rep_mime_type "/opt/qlproxy/etc/squid/icap_exclusions_contenttypes.conf"

adaptation_service_chain chain1 qlproxy1 service_req
adaptation_access chain1 deny qlproxy_icap_edomains
adaptation_access chain1 allow all

adaptation_service_chain chain2 qlproxy2 service_resp
adaptation_access chain2 deny qlproxy_icap_edomains
adaptation_access chain2 deny qlproxy_icap_etypes

adaptation_access chain2 allow all

but after save and restart squid service, in squid.conf remain this on end of file (always, because is autogenerated and i dont know where is template for generatin to delete these lines):

icap_enable on
icap_send_client_ip on
icap_send_client_username on 
icap_client_username_encode off
icap_client_username_header X-Authenticated-User
icap_preview_enable on
icap_preview_size 1024

icap_service service_req reqmod_precache bypass=0 icap://127.0.0.1:1344/squidclamav
icap_service service_resp respmod_precache bypass=0 icap://127.0.0.1:1344/squidclamav

adaptation_access service_req allow all
adaptation_access service_resp allow all

Can you pleas verify my settings and tune it? Thx.