Successful Install on Igel 4210 LX Winestra thin client
-
OK here's how the CF card slot area looks like in mine.
-
And here's how I added a 2.5 inch HDD to the case, using this ATA cable.
-
Hi, robi, I really appreciate your help, finally my Neoware CA22 is running from a 6GB microdrive obtained from an iPod, also tested with a CF card but the microdrive is faster than the CF card…
Thank you a lot.
-
Microdrive… what a great idea. I'll see what I can find on eBay.
-
Microdrive… what a great idea. I'll see what I can find on eBay.
Bought 3 different microdrives from eBay, unfortunately the system doesn't boot up correctly with them. Tried installin Ubuntu without success on the microdrives, and although the installation process seems to go through fine, after a reboot, there are weird kernel messages and it's unable to mount the media. :'(
-
Just a quick update: the new pfSense NanoBSD v2.1-RELEASE tested and works perfectly on this box from a 4GB CF card!
There are still available on eBay thin clients of this type, great prices.
-
Hello, I have the same Igel Winestra 4210 with via cpu 1GHz.
I boot the machine with a usb hard drive, but when I switch off it, my usb hard drive continue to be powered on.
Also your winestra client continues to power on usb ports when it is switched off? Or maybe I can disable it in bios?Thank you for your response.
Max
-
I don't use USB storage devices on my Winestras so I don't know.
-
Just a quick update: the new pfSense NanoBSD v2.1-RELEASE tested and works perfectly on this box from a 4GB CF card!
Tested with both 2.1.3 and 2.1.4 - they work out of the box on this hardware.
Very reliable pieces, got one running from January 2012, without a single crash/freeze. And bought them used from eBay. -
Robi,
I also have an HP e140 CA22 (winnet P680 MB) and am interested in fitting it with a toshiba or hitachi 1.8 microdrive (20-40GB) as it sounds like you have done. My interest is to experiment with Squid or snort. Have you tried this? Any particular recommendations on drives or ? If you have tried these packages, did the system still perform OK?Thanks for any help you can provide.
Dave
-
Hi!
Yes I've got a couple of 4GB microdrives from eBay. Unfortunately their hardware IDs are pre-coded as removable disks, so it's really tricky to install any OS on them. I failed completely to install any Ubuntu server version, for example, using any traditional methods.
I finally gave up trying to install any other OS on them, because I found a flash-optimized Debian distro, called Voyage Linux, which fits my needs perfectly.
I didn't try pfSense on microdrive, because pfSense has the NanoBSD version optimized to run from flash.I don't use squid/snort yet, so I don't have any experience with them so far. But i plan to do so in the future, as I see it now, I'd keep the NanoBSD architecture and use some sort of external drive (an eSata connected SSD disk for instance) for these packages.
-
A quick report that pfSense 2.2-RELEASE works perfectly with this hardware. The VIA Padlock hardware crypto detected.
Tested using the NanoBSD version on a 4GB CF card, and 1GB RAM installed (pfSense-2.2-RELEASE-4g-i386-nanobsd-vga.img.gz)
-
Quick benchmark with the new 2.2:
- 86-93 Mbit with NAT
- 93 Mbit without NAT
- 33 Mbit OpenVPN
CPU load 60-80%, good results given that the box has one 100Mbps NIC onboard + added an Intel-based 100Mbps dual-nic PCI card.
-
hi robi
i also use an igel for pfsense. i found your report about it and bought me one from ebay. i am very satisfied with it. thanks for your helpful texts. i have now with the 2.2 version a little problem. i cant manage to install the mbmon package for temperature readout which you described on page one. it says the package managment tool is not yet installed on my system. if i say yes to fetch and install it it tells me not found. any ideas how i could get it to work?
also i am not sure if 2.2 is working correctly with padlock. under /system/advanced/misc/ there is no Cryptographic Hardware Acceleration Cryptographic Hardware for via padlock?
under ovpn settings Hardware Crypto it doesnt offer via padlock? i seem to recall that this was an option on the last version of pfsense?
i would appreciate it if you could help me with this questions :) -
You are doing this?:
https://forum.pfsense.org/index.php?topic=77166.msg420431#msg420431That worked ok for me though it took a very long time in Nano.
Steve
-
I think VIA Padlock as a selectable option was removed from 2.2 because it actually can't be turned off, the CPU automatically uses it when crypto tasks are to be done. You can see that VIA Padlock is present on the dashboard.
I've read this somewhere in this forum some weeks ago.As for the mbmon thing I can't test right now, I'll have a look into this next week.
-
Just write pfSense Nano onto a CF card and boot that. ;D
Steve
-
-
hi there
is anyone also experiencing troubles after update to 2.2.1? On my igel machines i dont get internet connection after reboot. i use them to tunnel to a pay ovpn service but now i have to restart always manually the ovpn client to get it work. there is no error message in the logs. the only suspicous entry is "device busy".
best regards
steve -
Mine works well, but I don't use OpenVPN anymore with them, so I can't reproduce your scenario.
