Automatic outbound NAT rule generation not working
-
After upgrade to 2.1.5 i have add one new interface and Automatic outbound NAT rule generation not create automatic rule.
On existent interfaces it is create auto rules normal
Some way to reset this rules ???? And re-create correct -
On comand this interface is on on gui note list rule and nat tro interface not work
The problem interface is 192.168.30.0/24
Others interfaces works 100%$ grep tonatsubnets /tmp/rules.debug
table <tonatsubnets>{ 192.168.2.0/24 192.168.3.0/24 192.168.4.0/24 192.168.6.0/24 192.168.9.0/24 192.168.77.0/24 192.168.30.0/24 127.0.0.0/8 }
nat on $WAN from <tonatsubnets>port 500 to any port 500 -> 192.168.1.252/32 port 500
nat on $WAN from <tonatsubnets>to any -> 192.168.1.252/32 port 1024:65535 </tonatsubnets></tonatsubnets></tonatsubnets> -
looks like 192.168.30.0/24 is there to me..
"table <tonatsubnets>{ 192.168.2.0/24 192.168.3.0/24 192.168.4.0/24 192.168.6.0/24 192.168.9.0/24 192.168.77.0/24 192.168.30.0/24 127.0.0.0/8 }"
Did you create rules on the new interface to allow the traffic you want?</tonatsubnets>
-
Solved its create correct
My fault