Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Pfsense Install on Nokia IP390

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    118 Posts 8 Posters 40.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      There is the possibility that a 1 at the GPIO register actually turns the LED off. So you could try the other pins that are GPIO enabled and set as output.

      ./writeio 0x4bb 0x03
      

      Steve

      1 Reply Last reply Reply Quote 0
      • C
        charliem
        last edited by

        Any chance of getting your readio program running under IPSO?  Or finding a native tool to do the same thing that might already be on the IPSO image?  Comparing the values under pfSense and IPSO may give some clues, if possible.

        1 Reply Last reply Reply Quote 0
        • R
          RBT-RS
          last edited by

          Hmm. I tried that GPIO value on all of the values set to zero in the list, no changes. Something I did notice though was that the value was changing to 3, not 1 according to writeio.

          And, apparently Stephenw said there isn't any kind of safety on the program, so, yes, in theory that might be a logical thing to do, get the ipso values and see how they're different. I'll try that in a sec.

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            It was compiled against FreeBSD 8.1 but still works in 8.3. However I think IPSO is based on FreeBSD 6 so who knows. The program is very simple so it may work. Which IPSO version is it?

            Steve

            1 Reply Last reply Reply Quote 0
            • R
              RBT-RS
              last edited by

              6.2, released late 2010 I believe. I believe 6.2 is the last version of IPSO before the networking division of Nokia was bought by Checkpoint technologies.

              Anyway, firing up IPSO now…

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                @RBT-RS:

                Something I did notice though was that the value was changing to 3, not 1 according to writeio.

                What exactly did you mean by this?

                Reading back through this it looks like we've tried all the pins. It's easy to overlook one though, if anyone wants to read back through the thread and check my work feel free!
                There were several steps where we changed more than one GPIO pin in one go which could have potentially hidden the result but it seems unlikely given that there are several LEDs to be driven.

                Hmm.  :-\

                Steve

                1 Reply Last reply Reply Quote 0
                • R
                  RBT-RS
                  last edited by

                  Hm. I appear to be having troubles getting IPSO online. I'll have to try readio and writeio tomorrow, fortunately having access to an ipso image is useful and I can download readio and writeio and insert them into the install image, meaning I should have readio and writeio after installing.

                  I meant that when I set the io, it would say Setting 0x4bb to 3. which I didn't expect as I had expected it to say 1.

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Hmm, we may have some confusion here. Why did you expect it to say 1? At that point I believe I'd asked you to try:
                    ./writeio 0x4bb 0x03
                    So I would expect it to say 3. It's entirely possible that I've failed to explain myself properly in which case we might have missed something.
                    Other than that it looks like it's not an ICH GPIO.

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • R
                      RBT-RS
                      last edited by

                      Hmm. Well what I'm planning on doing is testing the readio on ipso, using the the values you gave me. Hopefully the differences in values might be enough so that we can trawl through the data to find the LED io :P

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        You could try running superiotool to see if it finds something we've not seen.

                        Steve

                        1 Reply Last reply Reply Quote 0
                        • R
                          RBT-RS
                          last edited by

                          Hmm. No luck unfortunately.

                          superiotool r
                          No Super I/O found
                          
                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Looks like you found a way to load it.  :)
                            In case you used something odd. pfSense does support FreeBSD packages it's just that the 8.3 packages have now been archived so you have to specify the path:

                            pkg_add -r http://ftp-archive.freebsd.org/pub/FreeBSD-Archive/ports/i386/packages-8.3-release/Latest/superiotool.tbz
                            

                            Anyway no luck there. It seems they're using the Altera chip for I/O purposes and since it's a programmable device there's no easy way find out what it does.
                            Try running superiotool with verbose output (-V). That may give us some clue.

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • R
                              RBT-RS
                              last edited by

                              Alright, here's the output for superiotool -V

                              superiotool r
                              Probing for ALi Super I/O at 0x3f0...
                                Failed. Returned data: id=0xffff, rev=0xff
                              Probing for ALi Super I/O at 0x370...
                                Failed. Returned data: id=0xffff, rev=0xff
                              Probing for Fintek Super I/O at 0x2e...
                                Failed. Returned data: vid=0xffff, id=0xffff
                              Probing for Fintek Super I/O at 0x4e...
                                Failed. Returned data: vid=0x0000, id=0x0000
                              Probing for ITE Super I/O (init=standard) at 0x2e...
                                Failed. Returned data: id=0xffff, rev=0xf
                              Probing for ITE Super I/O (init=it8761e) at 0x2e...
                                Failed. Returned data: id=0xffff, rev=0xf
                              Probing for ITE Super I/O (init=it8228e) at 0x2e...
                                Failed. Returned data: id=0xffff, rev=0xf
                              Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
                                Failed. Returned data: id=0xffff, rev=0xf
                              Probing for ITE Super I/O (init=standard) at 0x4e...
                                Failed. Returned data: id=0x0000, rev=0x0
                              Probing for ITE Super I/O (init=it8761e) at 0x4e...
                                Failed. Returned data: id=0x0000, rev=0x0
                              Probing for ITE Super I/O (init=it8228e) at 0x4e...
                                Failed. Returned data: id=0x0000, rev=0x0
                              Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
                                Failed. Returned data: id=0x0000, rev=0x0
                              Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
                                Failed. Returned data: id=0xffff, rev=0xf
                              Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
                                Failed. Returned data: id=0xffff, rev=0xf
                              Probing for NSC Super I/O at 0x2e...
                                Failed. Returned data: port=0xff, port+1=0xff
                              Probing for NSC Super I/O at 0x4e...
                                Failed. Returned data: port=0x00, port+1=0x00
                              Probing for NSC Super I/O at 0x15c...
                                Failed. Returned data: port=0xff, port+1=0xff
                              Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
                                Failed. Returned data: id=0xff, rev=0xff
                              Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
                                Failed. Returned data: id=0xff, rev=0xff
                              Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
                                Failed. Returned data: id=0x00, rev=0x00
                              Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
                                Failed. Returned data: id=0x00, rev=0x00
                              Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
                                Failed. Returned data: id=0xff, rev=0xff
                              Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
                                Failed. Returned data: id=0xff, rev=0xff
                              Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
                                Failed. Returned data: id=0xff, rev=0xff
                              Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
                                Failed. Returned data: id=0xff, rev=0xff
                              Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
                                Failed. Returned data: id=0xff, rev=0xff
                              Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
                                Failed. Returned data: id=0xff, rev=0xff
                              Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
                                Failed. Returned data: id=0xff, rev=0xff
                              Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
                                Failed. Returned data: id=0xff, rev=0xff
                              Probing for Winbond Super I/O (init=0x88) at 0x2e...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x89) at 0x2e...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x88) at 0x4e...
                                Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
                              Probing for Winbond Super I/O (init=0x89) at 0x4e...
                                Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
                              Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
                                Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
                              Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
                                Failed. Returned data: id/oldid=0x00/0x00, rev=0x00
                              Probing for Winbond Super I/O (init=0x88) at 0x3f0...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x89) at 0x3f0...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x88) at 0x370...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x89) at 0x370...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x88) at 0x250...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x89) at 0x250...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
                                Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
                              No Super I/O found
                              
                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                No help there. One thing you could do is see if you can trace the connections from the ribbon cable. If they definitely connecting to the ICH we can see what pins are used and hence what GPIOs. It's possible that whatever is happening in IPSO it might be reconfiguring the ICH to enable more GPIOs. I thought that was only possible at boot though.

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • R
                                  RBT-RS
                                  last edited by

                                  Hmm. I think the tracks must be sandwiched in the motherboard, I can't see any tracks on either side..

                                  Anyway, following Charliew's suggestion, I downloaded readio onto ipso.. but..

                                  How could I get readio working?

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    Yes, I was forgetting it's a BGA package and looking at the sheet most of the GPIO pins are on the inside anyway so it's unlikely you'd be able to see the tracks.

                                    You could compile it against FreeBSD 6 (or whatever specific FreeBSD version that is built on). What is the result of:

                                    uname -a
                                    

                                    You could see what libc version you do have and symlink it to so.7. That can work but is bad practise.

                                    Steve

                                    1 Reply Last reply Reply Quote 0
                                    • R
                                      RBT-RS
                                      last edited by

                                      Here's the output for uname -a

                                      I believe IPSO runs on FreeBSD version 6.x?

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        Ok, here's readio compiled on FreeBSD 6.2. Just remove the .png extension I had to pout that on because you're only allowed a few file types as attachments. Give that a try. As far as I can find IPSO 6.2 is built on FreeBSD 6.2 but it's hard to get any sort of definitive answer.
                                        The MD5 should be 7deed0428bb423bbf803fb41b7d88d0a

                                        Steve

                                        readio6_2.png

                                        1 Reply Last reply Reply Quote 0
                                        • C
                                          charliem
                                          last edited by

                                          Could be 6.2 or 6.1, based on the version file I posted earlier (https://forum.pfsense.org/index.php?topic=81292.msg446131#msg446131).  This executable is dynamically linked, so if that doesn't work, you could statically link it.  Personally, I would have broken out the black tape long ago  :)

                                          1 Reply Last reply Reply Quote 0
                                          • R
                                            RBT-RS
                                            last edited by

                                            Alright, I ran readio on IPSO - here's the results:

                                            A lot of ff going on here.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.