Building pfSense - Something basic I'm doing wrong?

none

Hail,

jporter helped me to get the sources, but I can't find a post I had before that would walk through the steps to compile pfsense. I found the kernel dir (my main project), but can't figure out the what is the definitive script to config and build.

I tried the build.sh –configure get me issues:

%./build.sh --configure

You must first run ./set_version.sh !
See http://devwiki.pfsense.org/DevelopersBootStrapAndDevIso for more information.

You can also run ./menu.sh which will assist with the available options

is there a new version of http://devwiki.pfsense.org/DevelopersBootStrapAndDevIso ?

thanks,

none

ps: if I should open new thread, please say. As this is on the subject, I figured here as a right place.

Guest

@kpa:

Fair enough. I'll summarize quickly what I have learned so far:

There is no documentation available for using the tools repo so one has trough trial and error and asking around gather the necessary information on how to use it. In my case the missing piece of information was that pfPorts needs to built first before anything else. Building of pfPorts is not done automatically if you just fire up the build script as```
build.sh iso
You need an ultra-clean FreeBSD installation on the build host because the tools want to build everything its way and anything non-standard in terms of configuration trips it very easily.

Building pfSense will "contaminate" your build host with pfSense speficic modifications. This is something I absolutely don't want and I'm now moving to using a jail as the build host.

More to follow later.

Yes.. We maintain dedicated builders for this reason and more.

There is 10 years of history to deal with in changing things.

bhawk6901

I am trying to build on 8.3. when i run cd /usr/ports/textproc/expat2 && make depends install; i get error as shown in attchment. i have tried 3 different installations for i386 as well as amd64. Plz help on what im doing wrong

Capture.PNG_thumb

bmeeks

@bhawk6901:

I am trying to build on 8.3. when i run cd /usr/ports/textproc/expat2 && make depends install; i get error as shown in attchment. i have tried 3 different installations for i386 as well as amd64. Plz help on what im doing wrong

You have hit the problem with the FreeBSD 8.3 release not being compatible with the newer FreeBSD ports tree. Changing out the make utility as someone described in a previous post may help. You can also try this tip I was given and which worked for me:

Ports tree doesn’t support FreeBSD 8.3 anymore, you need to use the stable branch of ports tree called “2014Q2” instead of head. You can get it using:

svn co http://svn.freebsd.org/ports/branches/2014Q2 /usr/ports

This branch won’t have latest version of all ports, it only gets security updates, but the core files (/usr/ports/Mk/*) are still complaint with 8.3.

So to do the above on your builder, first delete the entire existing ports tree with –


rm -rf /usr/ports

– then run this command:


svn co http://svn.freebsd.org/ports/branches/2014Q2 /usr/ports

DO NOT perform a normal ports update in the future or you will break the builder again. My suggestion would be to abandon building FreeBSD 8.3-based pfSense and use 2.2 instead since it uses the current FreeBSD 10-STABLE.

Bill

bhawk6901

@bmeeks:

@bhawk6901:

I am trying to build on 8.3. when i run cd /usr/ports/textproc/expat2 && make depends install; i get error as shown in attchment. i have tried 3 different installations for i386 as well as amd64. Plz help on what im doing wrong

You have hit the problem with the FreeBSD 8.3 release not being compatible with the newer FreeBSD ports tree. Changing out the make utility as someone described in a previous post may help. You can also try this tip I was given and which worked for me:

Ports tree doesn’t support FreeBSD 8.3 anymore, you need to use the stable branch of ports tree called “2014Q2” instead of head. You can get it using:

svn co http://svn.freebsd.org/ports/branches/2014Q2 /usr/ports

This branch won’t have latest version of all ports, it only gets security updates, but the core files (/usr/ports/Mk/*) are still complaint with 8.3.

So to do the above on your builder, first delete the entire existing ports tree with –
rm -rf /usr/ports
– then run this command:
svn co http://svn.freebsd.org/ports/branches/2014Q2 /usr/ports
DO NOT perform a normal ports update in the future or you will break the builder again. My suggestion would be to abandon building FreeBSD 8.3-based pfSense and use 2.2 instead since it uses the current FreeBSD 10-STABLE.

Bill

Thanks for your reply. I shifted to freebsd10 before you replied. When i apply patches, it fails saying /usr/pfSensesrc/src does not exist.
Kindly guide me further

bmeeks

@bhawk6901:

Thanks for your reply. I shifted to freebsd10 before you replied. When i apply patches, it fails saying /usr/pfSensesrc/src does not exist.
Kindly guide me further

Well, it's been a long time since I set up my builder virtual machine, but I seem to remember having to manually create several directories along the way as I hit various bumps. As you have seen, the documentation is either missing and/or not updated in some cases. Try manually creating the directory /usr/pfSensesrc using:


mkdir -p /usr/pfSensesrc

Then try the apply patches step again. There may well be several directories you will need to manually create as the scripts seem to expect some to exist already, while others it will create if they are missing.

Bill

bhawk6901

Apply patches goes fine, next i get the error as shwon in attacchment. I made sure to change git.pfmechanics to
export FREEBSD_REPO_BASE=https://svn0.us-east.freebsd.org/base
also every time i invoke build iso option, it downloads sources again, any way to skip that?

Edit: snapshot of pfsensebuild.conf is att

Capture.PNG_thumb

Capture2.PNG_thumb

bhawk6901

UPDATE: when i apply patches manually it goes fine but when i invoke the buid.sh iso option patches get rejected. Any idea what might be causing that?

bmeeks

@bhawk6901:

UPDATE: when i apply patches manually it goes fine but when i invoke the buid.sh iso option patches get rejected. Any idea what might be causing that?

I haven't tried to build a 2.2 ISO in the last couple of months, so I don't know if my setup still works or not. However, in your screen capture of the error notice that it says "…cloning git@git.pfmechanics.com...". This means it is trying to use pfmechanics.com to checkout source code. I'm pretty sure that is an internal-only server at ESF, and thus you can't access it. Don't know if the script is hard-coded with this value or if it is customizable.

Bill

heper

@bmeeks:

@bhawk6901:

UPDATE: when i apply patches manually it goes fine but when i invoke the buid.sh iso option patches get rejected. Any idea what might be causing that?

I haven't tried to build a 2.2 ISO in the last couple of months, so I don't know if my setup still works or not. However, in your screen capture of the error notice that it says "…cloning git@git.pfmechanics.com...". This means it is trying to use pfmechanics.com to checkout source code. I'm pretty sure that is an internal-only server at ESF, and thus you can't access it. Don't know if the script is hard-coded with this value or if it is customizable.

Bill

yes pfmechanics is private…

see this post for the relevant public git repo's: https://forum.pfsense.org/index.php?topic=76132.msg415051#msg415051

bhawk6901

there has been progress. Now though when building ports, strongswan, php5 and resultantly others depending on php5 such as php5-pfsensemodule and a number of others as shown in attachment.
Error with php5 being

php55-5.5.13 conflicts with installed package(s):
php53-5.3.28

They will not build together.
Please remove them first with pkg delete.
*** Error code 1

Stop.
make: stopped in /usr/ports/lang/php55

any help please?
EDIT: tried building with make_jobs_unsafe=yes as well as otherwise. This is the log when i build with make_jobs_unsafe=yes

Capture.PNG_thumb
php55.txt
php55-pfSense-module.txt

bhawk6901

update: php55 errors are gone. uninstalled php53 first
still stuck on strongswan and libevent errors though

bhawk6901

went back to building on 8.3, All ports get build except for lighttpd.
Error log as shown in attachment

I went ahead to make the iso which got built succesfully but the web configurator page wouldnt load which i assume is due to absence of lighttpd.
What's causing the error? Help please

Capture.PNG_thumb

bmeeks

@bhawk6901:

went back to building on 8.3, All ports get build except for lighttpd.
Error log as shown in attachment

I went ahead to make the iso which got built succesfully but the web configurator page wouldnt load which i assume is due to absence of lighttpd.
What's causing the error? Help please

It's a problem with the pkgconfig tool version. Unfortunately, that's about the extent of my knowledge about this on FreeBSD. I recall hitting the same error myself in the past. I think I solved it by manually altering the Makefile, but as soon as you do a refresh from the pfsense-tools repository, your change will be overwritten. I have not looked, but are there different Git branches for pfsense-tools? Pulling "master" will of course bring down stuff optimized for FreeBSD 10. If older versions exist, they may contain pfPorts files compatible with the older FreeBSD 8.3 tools.

Bill

bhawk6901

@bmeeks:

It's a problem with the pkgconfig tool version. Unfortunately, that's about the extent of my knowledge about this on FreeBSD. I recall hitting the same error myself in the past. I think I solved it by manually altering the Makefile, but as soon as you do a refresh from the pfsense-tools repository, your change will be overwritten.
Bill

Can you please guide me to what change did you make exactly? I studied the Makefile but there was only one metnion of pkgconfig

GNU_CONFIGURE= yes
USES= gmake libtool pkgconfig tar:bzip2

One issue which i faced while building 2.2 via v10 was that whenever it tried to clone pfsense from repository, it would fail. When i checked git repository, i couldnt find RELENG_2_2 branch. Is that why if was failing and reporting that pfSenseGITREPO path doesnt exist?

bmeeks

@bhawk6901:

@bmeeks:

It's a problem with the pkgconfig tool version. Unfortunately, that's about the extent of my knowledge about this on FreeBSD. I recall hitting the same error myself in the past. I think I solved it by manually altering the Makefile, but as soon as you do a refresh from the pfsense-tools repository, your change will be overwritten.
Bill

Can you please guide me to what change did you make exactly? I studied the Makefile but there was only one metnion of pkgconfig

GNU_CONFIGURE= yes
USES= gmake libtool pkgconfig tar:bzip2

One issue which i faced while building 2.2 via v10 was that whenever it tried to clone pfsense from repository, it would fail. When i checked git repository, i couldnt find RELENG_2_2 branch. Is that why if was failing and reporting that pfSenseGITREPO path doesnt exist?

I don't remember what I changed. I just did a lot of Google searching and fiddled around with the USES section in the Makefile (looks like you are already doing that). I know at one point I also went exploring through /usr/ports/devel and installed some other stuff (but again, sorry I did not keep track of what I did). I only use my builders to produce PBIs for my supported packages: Snort and Suricata. I don't build ISOs routinely. I built one, and only just once. Actually I think my builder is also currently "broken" for building an ISO. It works fine for my purpose of building PBIs, though.

As for your second question, you are correct there is currently no RELENG_2_2 branch. If you have not done so already, from your builder and in the tools directory issue this command to see the available remote branches:


git remote show origin

Bill

clem68

The master branch of pfsense-tools supports building on FreeBSD 8.3 as well as 10.
Ports are not tied to a FreeBSD version, but there should be no problem building them up-to-date (I have done so).

Regarding pkgconf, I had a problem related to its obsolescence (it needs to be replaced by pkg-config) and maybe you are facing the same thing. The steps required to deal with this are described in UPGRADING , for example you can do:

portmaster -o devel/pkgconf devel/pkg-config

bhawk6901

@clem68:

The master branch of pfsense-tools supports building on FreeBSD 8.3 as well as 10.
Ports are not tied to a FreeBSD version, but there should be no problem building them up-to-date (I have done so).

Regarding pkgconf, I had a problem related to its obsolescence (it needs to be replaced by pkg-config) and maybe you are facing the same thing. The steps required to deal with this are described in UPGRADING , for example you can do:
portmaster -o devel/pkgconf devel/pkg-config

Thanks for the guidance. I'll look into it further :)

meanwhile regarding 2.2, which version do i specify to get build 2.2? I performed git remote origin and found these

Remote branches:
RELENG_1_2 tracked
RELENG_2_0 tracked
RELENG_2_1 tracked
devel tracked
master tracked
Local branch configured for 'git pull':

bhawk6901

@clem68:

The master branch of pfsense-tools supports building on FreeBSD 8.3 as well as 10.
Ports are not tied to a FreeBSD version, but there should be no problem building them up-to-date (I have done so).

Regarding pkgconf, I had a problem related to its obsolescence (it needs to be replaced by pkg-config) and maybe you are facing the same thing. The steps required to deal with this are described in UPGRADING , for example you can do:
portmaster -o devel/pkgconf devel/pkg-config

i had pkgconf installed, if im not wrong pkgconf replaced pkg-config.you mean i should revert to old i,e. pkg-config?

lighttpd.txt

bhawk6901

messed around with pkg-plist, removed "@" symbols and error changes to

Creating bzip'd tar ball in '/usr/ports/www/lighttpd/work/pkg/lighttpd-1.4.35_2.tbz'
tar: sample etc/lighttpd/lighttpd.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/modules.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/access_log.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/auth.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/cml.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/cgi.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/compress.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/debug.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/dirlisting.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/evhost.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/expire.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/fastcgi.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/magnet.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/mime.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/mysql_vhost.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/proxy.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/rrdtool.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/scgi.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/secdownload.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/simple_vhost.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/ssi.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/status.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/trigger_b4_dl.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/userdir.conf.sample: Cannot stat: No such file or directory
tar: sample etc/lighttpd/conf.d/webdav.conf.sample: Cannot stat: No such file or directory
tar: dirrm lib/lighttpd: Cannot stat: No such file or directory
tar: dirrmtry etc/lighttpd/vhosts.d: Cannot stat: No such file or directory
tar: dirrmtry etc/lighttpd/conf.d: Cannot stat: No such file or directory
tar: dirrmtry etc/lighttpd: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors.
pkg_create: make_dist: tar command failed with code 256
*** Error code 1