Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Cannot NAT trough OPT1 interface on multiwan

    2.2 Snapshot Feedback and Problems - RETIRED
    18
    49
    16.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A
      apant
      last edited by

      What do you mean manual nat work just fine ?

      1 Reply Last reply Reply Quote 0
      • N
        naras
        last edited by

        I'm not alone ;D

        1 Reply Last reply Reply Quote 0
        • G
          Grickos
          last edited by

          Still not working.
          How can manually adjust?

          1 Reply Last reply Reply Quote 0
          • D
            davros123
            last edited by

            perhaps this is why i can not access my modem any more? (using these instructions from the wiki)
            https://doc.pfsense.org/index.php/Accessing_modem_from_inside_firewall

            If so, is there a simple alternative?

            1 Reply Last reply Reply Quote 0
            • V
              villavai
              last edited by

              im rolling back to 2.1.5, the reason why i do NAT on 2 interface because i have 2 different  WAN, which both have an public ip, and i use them to publish my website on both wan interface.

              is there any update about this problem? is it solve yet in 2.2?

              1 Reply Last reply Reply Quote 0
              • G
                Grickos
                last edited by

                I have 3 wan outputs with public IP. NAT does not work, inbound one WAN and exits on the second - the default GW. I went rolling back to 2.1.5 also.

                25.09.2014.png
                25.09.2014.png_thumb

                1 Reply Last reply Reply Quote 0
                • jimpJ
                  jimp Rebel Alliance Developer Netgate
                  last edited by

                  Anyone having this problem, if you could post your ruleset (/tmp/rules.debug) it may help. Feel free to sanitize the IPs but don't erase them (change the numbers to something else consistent).

                  Looks like there is something with reply-to and/or route-to that isn't quite right. There is at least one similar ticket – https://redmine.pfsense.org/issues/3760 -- which may need commented on and reopened if it is still broken on current snapshots.

                  Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

                  Need help fast? Netgate Global Support!

                  Do not Chat/PM for help!

                  1 Reply Last reply Reply Quote 0
                  • N
                    naras
                    last edited by

                    set optimization normal
                    set timeout { adaptive.start 0, adaptive.end 0 }
                    set limit states 60000
                    set limit src-nodes 60000

                    #System aliases

                    loopback = "{ lo0 }"
                    WAN = "{ pppoe0 }"
                    LAN = "{ hn1 }"
                    OPT1 = "{ pppoe1 }"

                    #SSH Lockout Table
                    table <sshlockout>persist
                    table <webconfiguratorlockout>persist
                    #Snort tables
                    table <snort2c>table <virusprot>table <bogons>persist file "/etc/bogons"
                    table <negate_networks># User Aliases

                    Gateways

                    GWOPT1_PPPOE = " route-to ( pppoe1 222.92.225.13 ) "
                    GWWAN_PPPOE = " route-to ( pppoe0 117.83.20.1 ) "

                    set loginterface hn1

                    set skip on pfsync0

                    scrub on $WAN all    fragment reassemble
                    scrub on $LAN all    fragment reassemble
                    scrub on $OPT1 all    fragment reassemble

                    no nat proto carp
                    no rdr proto carp
                    nat-anchor "natearly/"
                    nat-anchor "natrules/                    "

                    Outbound NAT rules (automatic)

                    Subnets to NAT

                    tonatsubnets = "{ 127.0.0.0/8 10.10.10.0/24 }"
                    nat on $WAN  from $tonatsubnets to any port 500 -> 117.83.21.147/32  static-port
                    nat on $WAN  from $tonatsubnets to any -> 117.83.21.147/32 port 1024:65535 
                    nat on $OPT1  from $tonatsubnets to any port 500 -> 49.84.243.228/32  static-port
                    nat on $OPT1  from $tonatsubnets to any -> 49.84.243.228/32 port 1024:65535

                    Load balancing anchor

                    rdr-anchor "relayd/*"

                    TFTP proxy

                    rdr-anchor "tftp-proxy/*"

                    NAT Inbound Redirects

                    rdr on pppoe0 proto tcp from any to 117.83.21.147 port 8000 -> 10.10.10.10

                    Reflection redirects

                    rdr on hn1 proto tcp from any to 117.83.21.147 port 8000 tag PFREFLECT -> 127.0.0.1 port 19000

                    rdr on pppoe1 proto tcp from any to 49.84.243.228 port 8000 -> 10.10.10.10

                    Reflection redirects

                    rdr on hn1 proto tcp from any to 49.84.243.228 port 8000 tag PFREFLECT -> 127.0.0.1 port 19001

                    UPnPd rdr anchor

                    rdr-anchor "miniupnpd"

                    anchor "relayd/"
                    anchor "openvpn/                    "
                    anchor "ipsec/*"

                    Block all IPv6

                    block in log quick inet6 all tracker 1000000001 label "Block all IPv6"
                    block out log quick inet6 all tracker 1000000002 label "Block all IPv6"
                    #–-------------------------------------------------------------------------

                    default deny rules

                    #---------------------------------------------------------------------------
                    block in log inet all tracker 1000000101 label "Default deny rule IPv4"
                    block out log inet all tracker 1000000102 label "Default deny rule IPv4"
                    block in log inet6 all tracker 1000000103 label "Default deny rule IPv6"
                    block out log inet6 all tracker 1000000104 label "Default deny rule IPv6"

                    IPv6 ICMP is not auxilary, it is required for operation

                    See man icmp6(4)

                    1    unreach        Destination unreachable

                    2    toobig          Packet too big

                    128  echoreq        Echo service request

                    129  echorep        Echo service reply

                    133  routersol      Router solicitation

                    134  routeradv      Router advertisement

                    135  neighbrsol      Neighbor solicitation

                    136  neighbradv      Neighbor advertisement

                    pass  quick inet6 proto ipv6-icmp from any to any icmp6-type {1,2,135,136} tracker 1000000105 keep state

                    Allow only bare essential icmpv6 packets (NS, NA, and RA, echoreq, echorep)

                    pass out  quick inet6 proto ipv6-icmp from fe80::/10 to fe80::/10 icmp6-type {129,133,134,135,136} tracker 1000000106 keep state
                    pass out  quick inet6 proto ipv6-icmp from fe80::/10 to ff02::/16 icmp6-type {129,133,134,135,136} tracker 1000000107 keep state
                    pass in  quick inet6 proto ipv6-icmp from fe80::/10 to fe80::/10 icmp6-type {128,133,134,135,136} tracker 1000000108 keep state
                    pass in  quick inet6 proto ipv6-icmp from ff02::/16 to fe80::/10 icmp6-type {128,133,134,135,136} tracker 1000000109 keep state
                    pass in  quick inet6 proto ipv6-icmp from fe80::/10 to ff02::/16 icmp6-type {128,133,134,135,136} tracker 1000000110 keep state

                    We use the mighty pf, we cannot be fooled.

                    block log quick inet proto { tcp, udp } from any port = 0 to any tracker 1000000111
                    block log quick inet proto { tcp, udp } from any to any port = 0 tracker 1000000112
                    block log quick inet6 proto { tcp, udp } from any port = 0 to any tracker 1000000113
                    block log quick inet6 proto { tcp, udp } from any to any port = 0 tracker 1000000114

                    Snort package

                    block log quick from <snort2c>to any tracker 1000000115 label "Block snort2c hosts"
                    block log quick from any to <snort2c>tracker 1000000116 label "Block snort2c hosts"

                    SSH lockout

                    block in log quick proto tcp from <sshlockout>to (self) port 22 tracker 1000000301 label "sshlockout"

                    webConfigurator lockout

                    block in log quick proto tcp from <webconfiguratorlockout>to (self) port 443 tracker 1000000351 label "webConfiguratorlockout"
                    block in log quick from <virusprot>to any tracker 1000000400 label "virusprot overload table"
                    antispoof log for $WAN tracker 1000001570
                    antispoof log for $LAN tracker 1000002620

                    allow access to DHCPv6 server on LAN

                    We need inet6 icmp for stateless autoconfig and dhcpv6

                    pass  quick on $LAN inet6 proto udp from fe80::/10 to fe80::/10 port = 546 tracker 1000002651 label "allow access to DHCPv6 server"
                    pass  quick on $LAN inet6 proto udp from fe80::/10 to ff02::/16 port = 546 tracker 1000002652 label "allow access to DHCPv6 server"
                    pass  quick on $LAN inet6 proto udp from fe80::/10 to ff02::/16 port = 547 tracker 1000002653 label "allow access to DHCPv6 server"
                    pass  quick on $LAN inet6 proto udp from ff02::/16 to fe80::/10 port = 547 tracker 1000002654 label "allow access to DHCPv6 server"
                    antispoof log for $OPT1 tracker 1000003670

                    loopback

                    pass in  on $loopback inet all tracker 1000003711 label "pass IPv4 loopback"
                    pass out  on $loopback inet all tracker 1000003712 label "pass IPv4 loopback"
                    pass in  on $loopback inet6 all tracker 1000003713 label "pass IPv6 loopback"
                    pass out  on $loopback inet6 all tracker 1000003714 label "pass IPv6 loopback"

                    let out anything from the firewall host itself and decrypted IPsec traffic

                    pass out  inet all keep state allow-opts tracker 1000003715 label "let out anything IPv4 from firewall host itself"
                    pass out  inet6 all keep state allow-opts tracker 1000003716 label "let out anything IPv6 from firewall host itself"
                    pass out  route-to ( pppoe0 117.83.20.1 ) from 117.83.21.147 to !117.83.21.147/32 tracker 1000003811 keep state allow-opts label "let out anything from firewall host itself"
                    pass out  route-to ( pppoe1 222.92.225.13 ) from 49.84.243.228 to !49.84.243.228/32 tracker 1000003812 keep state allow-opts label "let out anything from firewall host itself"

                    make sure the user cannot lock himself out of the webConfigurator or SSH

                    pass in  quick on hn1 proto tcp from any to (hn1) port { 443 80 } tracker 1000004121 keep state label "anti-lockout rule"

                    NAT Reflection rules

                    pass in  inet tagged PFREFLECT tracker 1000004141 keep state label "NAT REFLECT: Allow traffic to localhost"

                    User-defined rules follow

                    anchor "userrules/*"
                    pass  in  quick  on $WAN reply-to ( pppoe0 117.83.20.1 )  proto tcp  from any to 10.10.10.10 port 8000 flags S/SA keep state  label "USER_RULE: NAT "
                    pass  in  quick  on $WAN reply-to ( pppoe0 117.83.20.1 ) inet proto tcp  from any to 117.83.21.147 port 443 tracker 1410767372 flags S/SA keep state  label "USER_RULE"
                    pass  in  quick  on $LAN inet proto tcp  from 10.10.10.10  to <negate_networks>tracker 1410768766 flags S/SA keep state  label "NEGATE_ROUTE: Negate policy routing for destination"
                    pass  in  quick  on $LAN  $GWWAN_PPPOE inet proto tcp  from 10.10.10.10 to any tracker 1410768766 flags S/SA keep state  label "USER_RULE: Default allow LAN to any rule"
                    pass  in  quick  on $LAN inet proto tcp  from 10.10.10.0/24  to <negate_networks>port 443 tracker 1410768578 flags S/SA keep state  label "NEGATE_ROUTE: Negate policy routing for destination"
                    pass  in  quick  on $LAN  $GWWAN_PPPOE inet proto tcp  from 10.10.10.0/24 to any port 443 tracker 1410768578 flags S/SA keep state  label "USER_RULE: Default allow LAN to any rule"
                    pass  in  quick  on $LAN inet from 10.10.10.0/24 to any tracker 0100000101 keep state  label "USER_RULE: Default allow LAN to any rule"

                    at the break! label "USER_RULE: Default allow LAN IPv6 to any rule"

                    pass  in  quick  on $OPT1  $GWOPT1_PPPOE inet proto tcp  from any to 49.84.243.228 port 443 tracker 1410767990 flags S/SA keep state  label "USER_RULE"
                    pass  in  quick  on $OPT1  $GWOPT1_PPPOE inet proto tcp  from any to 10.10.10.10 port 8000 tracker 1411286824 flags S/SA keep state  label "USER_RULE: NAT "
                    pass  in  quick  on $OPT1 reply-to ( pppoe1 222.92.225.13 ) inet proto icmp  from any to 49.84.243.228 tracker 1410843035 keep state  label "USER_RULE"

                    VPN Rules

                    anchor "tftp-proxy/*"</negate_networks></negate_networks></virusprot></webconfiguratorlockout></sshlockout></snort2c></snort2c></negate_networks></bogons></virusprot></snort2c></webconfiguratorlockout></sshlockout>

                    1 Reply Last reply Reply Quote 0
                    • V
                      villavai
                      last edited by

                      i cannot give the debug because I've already revert back to 2.1.5, and since pf is my only fw, and is being use in production site, so i hope someone kindly test it in 2.2 latest snapshot to give the answer is this problem still exist or not.

                      thank you.

                      1 Reply Last reply Reply Quote 0
                      • N
                        naras
                        last edited by

                        @villavai:

                        i cannot give the debug because I've already revert back to 2.1.5, and since pf is my only fw, and is being use in production site, so i hope someone kindly test it in 2.2 latest snapshot to give the answer is this problem still exist or not.

                        thank you.

                        Unfortunately, it's still there.

                        1 Reply Last reply Reply Quote 0
                        • E
                          eSpezi
                          last edited by

                          Hi everybody,

                          this is not only a NAT problem.
                          It seems that the routing in general does not work properly with multiwan. (in my case WAN_KD=cable router, WAN_TO=PPPoE modem)
                          I'm running the Oct 03 10:14:50 CDT 2014 BETA, but also had the same problem with a previous version (Oct 01).

                          I can't even access the pfS Webgui from the WAN_TO side, although in the firewall log the request is shown as PASS.

                          My config:
                          set optimization normal
                          set timeout { adaptive.start 0, adaptive.end 0 }
                          set limit states 198000
                          set limit src-nodes 198000

                          #System aliases

                          loopback = "{ lo0 }"
                          WAN_KD = "{ re0 }"
                          LAN = "{ re2 }"
                          WAN_TO = "{ pppoe0 }"
                          OpenVPN = "{ openvpn }"

                          #SSH Lockout Table
                          table <sshlockout>persist
                          table <webconfiguratorlockout>persist
                          #Snort tables
                          table <snort2c>table <virusprot>table <bogons>persist file "/etc/bogons"
                          table <vpn_networks>{ 192.168.254.0/24 }
                          table <negate_networks>{ 192.168.254.0/24 }

                          User Aliases

                          admin_ports = "{  456  4562 }"
                          ovpn_ports = "{  1194  1199 }"
                          table <ovpn_remote_networks>{  192.168.254.0/24  192.168.222.0/24 }
                          OVPN_Remote_Networks = "<ovpn_remote_networks>"
                          table <rfc1918_private_networks>{  10.0.0.0/8  172.16.0.0/12  192.168.0.0/16 }
                          RFC1918_Private_Networks = "<rfc1918_private_networks>"
                          table <server>{  172.16.100.100 }
                          Server = "<server>"

                          Gateways

                          GWWAN_KD_GW = " route-to ( re0 192.168.0.1 ) "
                          GWWAN_TO_PPPOE = " route-to ( pppoe0 XXX.WAN.TO.GW ) "
                          GWGWG_LAN = "  route-to { ( pppoe0 XXX.WAN.TO.GW )  }  "

                          set loginterface re2

                          set skip on pfsync0

                          scrub on $WAN_KD all    fragment reassemble
                          scrub on $LAN all    fragment reassemble
                          scrub on $WAN_TO all    fragment reassemble

                          no nat proto carp
                          no rdr proto carp
                          nat-anchor "natearly/"
                          nat-anchor "natrules/                          "

                          Outbound NAT rules (automatic)

                          Subnets to NAT

                          tonatsubnets = "{ 127.0.0.0/8 172.16.0.0/16 192.168.254.0/24 }"
                          nat on $WAN_KD  from $tonatsubnets to any port 500 -> 192.168.0.2/32  static-port
                          nat on $WAN_KD  from $tonatsubnets to any -> 192.168.0.2/32 port 1024:65535 
                          nat on $WAN_TO  from $tonatsubnets to any port 500 -> XXX.WAN.TO.IP/32  static-port
                          nat on $WAN_TO  from $tonatsubnets to any -> XXX.WAN.TO.IP/32 port 1024:65535

                          Load balancing anchor

                          rdr-anchor "relayd/*"

                          TFTP proxy

                          rdr-anchor "tftp-proxy/*"

                          NAT Inbound Redirects

                          rdr on re0 proto tcp from any to 192.168.0.2 port 443 -> $Server
                          rdr on re0 proto tcp from any to 192.168.0.2 port 8182 -> $Server port 5900

                          UPnPd rdr anchor

                          rdr-anchor "miniupnpd"

                          anchor "relayd/"
                          anchor "openvpn/                          "
                          anchor "ipsec/*"

                          Block all IPv6

                          block in log quick inet6 all tracker 1000000001 label "Block all IPv6"
                          block out log quick inet6 all tracker 1000000002 label "Block all IPv6"
                          #–-------------------------------------------------------------------------

                          default deny rules

                          #---------------------------------------------------------------------------
                          block in log inet all tracker 1000000101 label "Default deny rule IPv4"
                          block out log inet all tracker 1000000102 label "Default deny rule IPv4"
                          block in log inet6 all tracker 1000000103 label "Default deny rule IPv6"
                          block out log inet6 all tracker 1000000104 label "Default deny rule IPv6"

                          IPv6 ICMP is not auxilary, it is required for operation

                          See man icmp6(4)

                          1    unreach        Destination unreachable

                          2    toobig          Packet too big

                          128  echoreq        Echo service request

                          129  echorep        Echo service reply

                          133  routersol      Router solicitation

                          134  routeradv      Router advertisement

                          135  neighbrsol      Neighbor solicitation

                          136  neighbradv      Neighbor advertisement

                          pass  quick inet6 proto ipv6-icmp from any to any icmp6-type {1,2,135,136} tracker 1000000105 keep state

                          Allow only bare essential icmpv6 packets (NS, NA, and RA, echoreq, echorep)

                          pass out  quick inet6 proto ipv6-icmp from fe80::/10 to fe80::/10 icmp6-type {129,133,134,135,136} tracker 1000000106 keep state
                          pass out  quick inet6 proto ipv6-icmp from fe80::/10 to ff02::/16 icmp6-type {129,133,134,135,136} tracker 1000000107 keep state
                          pass in  quick inet6 proto ipv6-icmp from fe80::/10 to fe80::/10 icmp6-type {128,133,134,135,136} tracker 1000000108 keep state
                          pass in  quick inet6 proto ipv6-icmp from ff02::/16 to fe80::/10 icmp6-type {128,133,134,135,136} tracker 1000000109 keep state
                          pass in  quick inet6 proto ipv6-icmp from fe80::/10 to ff02::/16 icmp6-type {128,133,134,135,136} tracker 1000000110 keep state

                          We use the mighty pf, we cannot be fooled.

                          block log quick inet proto { tcp, udp } from any port = 0 to any tracker 1000000111
                          block log quick inet proto { tcp, udp } from any to any port = 0 tracker 1000000112
                          block log quick inet6 proto { tcp, udp } from any port = 0 to any tracker 1000000113
                          block log quick inet6 proto { tcp, udp } from any to any port = 0 tracker 1000000114

                          Snort package

                          block log quick from <snort2c>to any tracker 1000000115 label "Block snort2c hosts"
                          block log quick from any to <snort2c>tracker 1000000116 label "Block snort2c hosts"

                          SSH lockout

                          block in log quick proto tcp from <sshlockout>to (self) port 4562 tracker 1000000301 label "sshlockout"

                          webConfigurator lockout

                          block in log quick proto tcp from <webconfiguratorlockout>to (self) port 456 tracker 1000000351 label "webConfiguratorlockout"
                          block in log quick from <virusprot>to any tracker 1000000400 label "virusprot overload table"

                          block bogon networks (IPv4)

                          http://www.cymru.com/Documents/bogon-bn-nonagg.txt

                          block in log quick on $WAN_KD from <bogons>to any tracker 1000001551 label "block bogon IPv4 networks from WAN_KD"
                          antispoof log for $WAN_KD tracker 1000001570
                          antispoof log for $LAN tracker 1000002620
                          antispoof log for $WAN_TO tracker 1000003670

                          loopback

                          pass in  on $loopback inet all tracker 1000004761 label "pass IPv4 loopback"
                          pass out  on $loopback inet all tracker 1000004762 label "pass IPv4 loopback"
                          pass in  on $loopback inet6 all tracker 1000004763 label "pass IPv6 loopback"
                          pass out  on $loopback inet6 all tracker 1000004764 label "pass IPv6 loopback"

                          let out anything from the firewall host itself and decrypted IPsec traffic

                          pass out  inet all keep state allow-opts tracker 1000004765 label "let out anything IPv4 from firewall host itself"
                          pass out  inet6 all keep state allow-opts tracker 1000004766 label "let out anything IPv6 from firewall host itself"
                          pass out  route-to ( re0 192.168.0.1 ) from 192.168.0.2 to !192.168.0.0/24 tracker 1000004861 keep state allow-opts label "let out anything from firewall host itself"
                          pass out  route-to ( pppoe0 XXX.WAN.TO.GW ) from XXX.WAN.TO.IP to !XXX.WAN.TO.IP/32 tracker 1000004862 keep state allow-opts label "let out anything from firewall host itself"

                          User-defined rules follow

                          anchor "userrules/*"
                          pass  in  quick  on $OpenVPN inet from $OVPN_Remote_Networks to 172.16.0.0/16 tracker 1412417430 keep state  label "USER_RULE"
                          pass  in  quick  on $WAN_KD reply-to ( re0 192.168.0.1 ) inet proto tcp  from any to 192.168.0.2 port $admin_ports tracker 1412198572 flags S/SA keep state  label "USER_RULE"
                          pass  in  quick  on $WAN_KD reply-to ( re0 192.168.0.1 ) inet proto udp  from any to 192.168.0.2 port $ovpn_ports tracker 1412415560 keep state  label "USER_RULE"
                          pass  in  quick  on $WAN_KD reply-to ( re0 192.168.0.1 )  proto tcp  from any to $Server port 443 flags S/SA keep state  label "USER_RULE: NAT "
                          pass  in  quick  on $WAN_KD reply-to ( re0 192.168.0.1 )  proto tcp  from any to $Server port 5900 flags S/SA keep state  label "USER_RULE: NAT "
                          pass  in  quick  on $LAN inet proto tcp  from any to 172.16.100.1 port $admin_ports tracker 1412207357 flags S/SA keep state  label "USER_RULE"
                          pass  in  quick  on $LAN inet from 172.16.0.0/16  to <negate_networks>tracker 0100000101 keep state  label "NEGATE_ROUTE: Negate policy routing for destination"
                          pass  in  quick  on $LAN  $GWGWG_LAN inet from 172.16.0.0/16 to any tracker 0100000101 keep state  label "USER_RULE: Default allow LAN to any rule"
                          pass  in  quick  on $WAN_TO reply-to ( pppoe0 XXX.WAN.TO.GW ) inet proto tcp  from any to XXX.WAN.TO.IP port $admin_ports tracker 1412448206 flags S/SA keep state  label "USER_RULE"

                          VPN Rules

                          anchor "tftp-proxy/*"

                          Any news on the issue?

                          Thanks,
                          Harry</negate_networks></bogons></virusprot></webconfiguratorlockout></sshlockout></snort2c></snort2c></server></server></rfc1918_private_networks></rfc1918_private_networks></ovpn_remote_networks></ovpn_remote_networks></negate_networks></vpn_networks></bogons></virusprot></snort2c></webconfiguratorlockout></sshlockout>

                          1 Reply Last reply Reply Quote 0
                          • M
                            mikeisfly
                            last edited by

                            I can confirm, I am having the same issue using the Oct 4th 64bit build. I can provide configurations if needed but I know I have configured everything correctly and the firewall blocks show no blocks. Downgrading back to 2.1.5 fixes the issues with the exact same configuration file. Just to give an over view of what I did.

                            created a rule under lan to have my plex machine use the second WAN.
                            Created a NAT (port Forward for TCP 32400) to plex machine
                            Rule was automatically generated.

                            Some fixes that I have found:

                            Changing default gateways to second WAN (Puts everything on second WAN), Not the desired behavior
                            Downgrading to 2.1.5 (everything works as expected)

                            I have this running on my home router so I can flash firmware again if Needed.

                            1 Reply Last reply Reply Quote 0
                            • E
                              eri--
                              last edited by

                              Actually seems that the one that have posted here have some issues in their configuration.

                              They have set a generic policy routing rule on their lan which overrides the reply-to(NAT of their OPTx) tha would make things work.

                              1 Reply Last reply Reply Quote 0
                              • E
                                eSpezi
                                last edited by

                                Hi Ermal,

                                on my Dual WAN (WAN1 = Cable Router, WAN2 = PPPoE Modem) installation I successfully can ping each WAN IF.
                                But I only can reach pfSenses WebGui or anything else on the current Default Gateway.
                                By current I mean, that if the default Default Gateway (WAN1) is marked as down (unfortunately still way too often false alarm by apinger) then I am able to reach the WebGui via WAN2.

                                I followed your suggestions, switched to manual outbound and added the propsed rule on top of everything, but that doesn't change anything.

                                Has anybody had success with this workaround?
                                Any other suggestions to make it work?

                                Thanks,
                                Harry

                                Edit:
                                Ermal in my case, you're right. I've policy routing on lan to a failover gateway group. That same scenario used to work fine with 2.15

                                1 Reply Last reply Reply Quote 0
                                • M
                                  mattbunce
                                  last edited by

                                  Excuse my ignorance, but I can't quite figure out if there is a resolution to this yet? I see from Gloom this should be working if you set manual NAT rules on the OPT1 interface (not sure exactly how to, or what this means?).

                                  Also, ermal suggests that the problem is that we're using a "generic policy routing rule" - and this is overriding the reply-to. Again, I'm not exactly sure what is meant by "generic policy routing rule" and if there's anything we can do to work around this?

                                  I have run Wireshark on the NAT target machine, and whilst I don't understand what I'm looking at, you can clearly see that the http request I am making to the NAT forwarded port (from an external network) is hitting the target machine, so it does seem to be the reply that is getting lost somewhere.

                                  My setup

                                  WAN = DHCP client
                                  OPT1 = PIA VPN

                                  I have set-up forwarding via Firewall > NAT and manually created a floating rule for TCP/UDP traffic on OPT1 coming in the my target IP.

                                  I have two LAN rules, the first is for target machine and sets the default gateway as OPT1. The second is for all devices and has the default gateway as the router default (which would be WAN).

                                  The floating rule seems to make no difference, I see the traffic within Wireshark whether or not the floating rule is enabled.

                                  1 Reply Last reply Reply Quote 0
                                  • C
                                    cmb
                                    last edited by

                                    It's not working, none of the workarounds are worth trying (short of for experimentation purposes if you want). This is the bug:
                                    https://redmine.pfsense.org/issues/3760

                                    1 Reply Last reply Reply Quote 0
                                    • M
                                      mattbunce
                                      last edited by

                                      Thanks cmb - That saves me spending any more time on this for now!

                                      1 Reply Last reply Reply Quote 0
                                      • E
                                        eri--
                                        last edited by

                                        Please try a next coming snapshot it should be fixed.

                                        1 Reply Last reply Reply Quote 0
                                        • E
                                          eSpezi
                                          last edited by

                                          Hi Ermal,

                                          thanks a lot for addressing the issue!
                                          Is the fix already in the Wed Oct 15 14:37:51 CDT 2014 Build?

                                          Cheers,
                                          Harry

                                          1 Reply Last reply Reply Quote 0
                                          • E
                                            eri--
                                            last edited by

                                            Yeah it should be on that build or newer.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.