Problems installing latest pfsense
-
I've experienced problems connecting DOMs to other computers or USB-IDE adapters, many DOMs use unstandard pinouts (reverse, mirrored IDE pinouts). This is the case for example for DOMs in some HP Thin Clients.
But there IS hope, HP provides a way to create a bootable USB stick which you can copy gzipped dd images on (just like NanoBSD images of pfSense are) and with a simple menu-based utility booted from that stick, you can write the image to the DOM without even having to open the case.
Check this out: http://www.hp.com/sbso/busproducts-thinpro.html?jumpid=in_r2910_dtSLBox/heasmith
start virtual machine
insert a usb stick in your PC
attach to vm
switch to admin mode in vm (Administrator password: "root")
control panel > management > thinstate- thinpro image
- make a copy of
- create a bootable USB flash drive
choose usb stick attached
…
remove usb stick
add custom images to the /images directory on the stick
Just copy the pfSense NanoBSD image which corresponds to your DOM disk size. The .dd.gz file created by the above utility in the /images directory can be safely deleted. You just need the bootable OS on the key...Done this on several HP t5730 Thin Clients so far with pfSense, I guess it should work on other models too, as long as they can boot from USB. It's gunzipping the image straight through dd writing it uncompressed to the flash. Just as it should be, displays nice progress bar. You can even make a backup of existing contents of the DOM with this utility, it'll create a compressed image of it on the stick.
-
Well I still cant get the pfsense go onto the DOM and when I plug in an CF with adapter it dont even see it at all so is the CF card be under like HDD-FSD?
-
You mean in the bios? If you're using a cf-ide adapter it should appear as a standard hard drive.
Steve
-
Yes in bios and its not showing up in bios as an hard drive.
-
I have read that some CF cards cannot operate in 'ide mode' though I've yet to find one myself.
Steve
-
Can't find any details on a neoware CA17:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?DocLang=de&docId=emr_na-c01383411&docLocale=de_DE&jumpid=reg_r1002_dede_c-001_title_r0001&ac.admitted=1412920697645.876444892.199480143
Can you give some details on the hardware?
-
Here is the images:
-
Not quite sure what we're looking at there.
So you're booting from a USB stick, yes? What image exactly is on the stick? Is that as far as it boots?Steve
-
Steve
right now I am booting off of the flash drive but I want DOM be doing this since flash drive can only do so many reads and writes before it quits. -
So it boots fine from USB but you've not written the DOM yet?
Both are flash devices subject to limited writes.Steve
-
Steve
that is correct it boots fine from usb but I have not gotten the DOM write to pfsense since I cant figure out how to do that since there is no option for 99 in this. -
Use the method I just posted to copy the image to the DOM: https://forum.pfsense.org/index.php?topic=82540.msg452130#msg452130
-
The problem appears to be persistent…
http://hardforum.com/showthread.php?p=1041144185
-
It appears the image you have on the USB stick is one of the the Nano images, yes? There is no option to install from there, it's not intended to be install media. Will it boot from the memstick image on a USB stick? That will give you the option to install the 'full' version of pfSense.
I would still try to run Nano from a DOM though. Others have run full with no issues.Steve
