Kernel: kern.maxfiles limit exceeded by uid 65534, please see tuning(7)

gabrielpc1190

Same problem and not having pfBlocker.
I have pfSense 2.1.4 64bits :(

silvertip257

I whipped up the following one-liner for the future. Maybe it's useful to somebody else as well.


# filterdns open files
fstat | awk '/filterdns/{i++} END{printf("%d files open by filterdns\n", i)}'

# all open files per process plus a total
fstat | awk '\!/CMD/{print $2} END{printf("* Total files open: %d", NR)}' | sort | uniq -c | sort -n

Here's an extension to my previous one-liner commands.
This one is more helpful to get the big picture (beyond what filterdns is doing).


# spit out open files with a count per command and order them

fstat | awk '\!/CMD/{print $2}' | sort | uniq -c | sort -n

petr

Same problem here. Clean embedded install, here is what I got in a config file.

dnsmasq[37691]: failed to read /etc/resolv.conf: Too many open files in system
kernel: kern.maxfiles limit exceeded by uid 65534, please see tuning(7).

The system was running for only around a week. I rebooted quickly as I needed to restore functionality. Approx. an hour after reboot, the stats are following:

...
   47 sh
 186 php
 214 filterdns
 226 ipfw-classifyd

Will monitor progress and post an update later today.

petr

After 5 hours of uptime, the stats are following:

 712 filterdns
 752 ipfw-classifyd

Which leads me to believe that this is going to grow until it just cannot, which leads me to more important question - what can I do to mitigate this?

I am really not running that complex setup - 2xWAN with rules to direct traffic to each + VPN client connection going out. Not that many hostnames either - below 10.

petr

The numbers seem to be growing, now at:


...
1072 filterdns
1106 ipfw-classifyd

I think this could be related to this: https://forum.pfsense.org/index.php?topic=42991.0

The number of open files seem to be increasing after every filter reload, which is now every 15m. Although I do not have any schedules set, it still gets reloaded every 15m.

In any case - it seems to me that ipfw-classifyd/filterdns do not respond correctly to the HUP signal being sent to them and re-create any temp files they had before for the previous config for the new one… which is not a sustainable approach.

silvertip257

@petr:
While this doesn't necessary help you, I got filterdns to stop consuming file handles when I removed the domain name from my IPSec VPN tunnel configuration.

I expect the increasing number of file handles open by filterdns was a result of Racoon (IPSec daemon) rekeying and what not.

Of course that thread <0> on the pfsense forum tells of the other problems I'm noticing.

<0> https://forum.pfsense.org/index.php?topic=81121

petr

@silvertip257:

@petr:
While this doesn't necessary help you, I got filterdns to stop consuming file handles when I removed the domain name from my IPSec VPN tunnel configuration.

I expect the increasing number of file handles open by filterdns was a result of Racoon (IPSec daemon) rekeying and what not.

Of course that thread <0> on the pfsense forum tells of the other problems I'm noticing.

<0> https://forum.pfsense.org/index.php?topic=81121

Thank you for the suggestion! Sadly, I am not running IPSec thus have nothing to switch-off.

The filterdns is now at 1118 open files after 1 day, 20 hours.

petr

Found a workaround - at least I think so, the number of open files has not grown for a few days.

To cut long story short, I've found out that the number of open files grows in correlation with gateway down alarms in my logs. This lead me to conclude that an unstable connection on one of the VPNs caused frequent alarms and subsequent reloads. As I was not using the alarms to do anything useful, I've simply disabled them for that connection - and voila, open file count stopped growing.

However, I still believe that there is a problem - in my opinion, having an alarm avery 10m should not be something that would destabilise the router, or lock it up as it does for me!

What do you think guys?

phil.davis

Here are my numbers on a production 2.1.5 system that has been up for 7 days:

   2 kernel
   2 md0
   2 md1
   3 init
   6 awk
   7 login
   7 rrdtool
   8 apinger
   8 cron
   9 fstat
   9 sudo
  14 check_reload_status
  14 devd
  14 logger
  15 dnsmasq
  15 sh
  16 inetd
  16 lighttpd
  16 sshlockout_pf
  16 tcpdump
  24 tcsh
  25 dhcpd
  33 sshd
  36 minicron
  41 syslogd
  54 ntpd
 249 openvpn
1535 php
1861 filterdns

But a 2.2 system that I just updated/rebooted looks like:

[2.2-BETA][root@apu22.localdomain]/root(1): fstat | awk '\!/CMD/{print $2}' | sort | uniq -c | sort -n
   2 kernel
   2 md0
   2 md1
   3 init
   4 getty
   7 awk
   7 rrdtool
   7 uniq
   8 apinger
   8 fstat
   8 login
   8 sshlockout_pf
   9 tcsh
  12 sleep
  14 cron
  14 dnsmasq
  14 sort
  15 filterlog
  16 check_reload_status
  17 devd
  17 inetd
  17 openvpn
  21 dhcpd
  22 lighttpd
  22 ntpd
  22 sshd
  36 dhclient
  36 minicron
  39 php-fpm
  42 syslogd
  47 sh

So the "php" and "filterdns" on the 2.1.5 production system have something wrong - there is no way they should be sitting with so many open file handles.
A problem like this will cause intermittent system problems after some random days/weeks/months.

petr

Exactly my concern!

I think the problem exhibits itself when filterdns (and also layer7 daemon for me) get restarted - could be gateway alarm, refresh of rules, etc. They do not seem to release the old files and just allocate new file handles.

phil.davis

I raised a bug report: https://redmine.pfsense.org/issues/3951
That way it does not get forgotten.