Configuring static port numbers
-
Hi
I have installed pfsense at a client where they have VOIP phones where each phone has a different port number and I need to ensure that pfsense does not change it when leaving the office network when the phones communicate with the hosted PBX in the cloud.
The network setup is
Internal(172.16.25.0/24) –-> (lan) pfsense (wan) ---> (10.0.1.0/24) netgear modem ----> Internet.First question.
I have created a port forwarding rule on the modem to forward port range 5060:5080 to the pfsense wan port. Do I need to create a firewall rule on the pfsense box for port forwarding or is it all handled through NAT?Second question
I have set "Manual Outbound NAT rule generation" on the pfsense box and now want to know if I need to create a static port on the wan or the lan interface or both.Am I going about this the right way?
Thanks in advance
O -
1. If you have Auto NAT Rule generation on, which it is by default I believe, then the required rule should be created.
2. If you have Manual enabled before you created your port forward then you will have to create the firewall rule.
I had an issue like this where I had to ensure VoIP packets leaving WAN had to be within a specified port range. I think I just had to create the WAN rule and that was it. I'll check in the morning.