How to prioritize OpenVPN tunnel data?
-
Hi Everyone,
I am running pfSense 2.5.1. I would like to prioritize all OpenVPN tunnel data. I have OpenVPN running in client mode on pfSense. As I am not familiar with traffic shaping or any other features please be detailed in steps for guides.
Much appreciated!
-
I am running pfSense 2.5.1. I would like to prioritize all OpenVPN tunnel data. I have OpenVPN running in client mode on pfSense. As I am not familiar with traffic shaping or any other features please be detailed in steps for guides.
Give the following Ports a bit more Prio:
-
TCP 443
-
TCP 943
-
UDP 1194
It should be enough if you add them to a clone of the qOthersHigh Queue. That should do it ;-)
The Wizard will help you to establish a traffic shaping. And the config helps you customize it. -
-
Thanks, is there anyway to do this without traffic shaping? I have used traffic shaping before and queues tend to full really quickly rendering the whole system useless. I find traffic shaping to be the weakest link in pfSense.
-
Thanks, is there anyway to do this without traffic shaping? I have used traffic shaping before and queues tend to full really quickly rendering the whole system useless. I find traffic shaping to be the weakest link in pfSense.
Not as far as I know…