Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Pdsbm-ln2 1U server Lan Ports fail in RC canidate. Using Intel 82573 nic

    Scheduled Pinned Locked Moved 2.2 Snapshot Feedback and Problems - RETIRED
    67 Posts 6 Posters 24.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      Topper727
      last edited by

      Verbose on
      rom commands done but not the 5 you had only 0 and 1 worked for me. with pci card.  will try the onboard next

      Keyboard is on in bios.. I can use keyboard in bios but after pfsense starts I can't use keyboard till it gets to more then half way through bootup then I get keyboard usage back again.

      Table 'FACP' at 0xbf68ad08
      Table 'TCPA' at 0xbf68ad8c
      Table 'MCFG' at 0xbf68adbe
      Table 'APIC' at 0xbf68adfa
      APIC: Found table at 0xbf68adfa
      APIC: Using the MADT enumerator.
      MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
      SMP: Added CPU 0 (AP)
      MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
      SMP: Added CPU 1 (AP)
      Copyright © 1992-2014 The FreeBSD Project.
      Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
              The Regents of the University of California. All rights reserved.
      FreeBSD is a registered trademark of The FreeBSD Foundation.
      FreeBSD 10.1-RELEASE-p1 #0 fd28f0b(releng/10.1)-dirty: Sat Dec 13 14:00:20 CST 2014
          root@pfsense-22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64
      FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
      Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff824c7000.
      Calibrating TSC clock ... TSC clock: 2194542438 Hz
      CPU: Intel(R) Pentium(R) Dual  CPU  E2200  @ 2.20GHz (2194.54-MHz K8-class CPU)
        Origin = "GenuineIntel"  Id = 0x6fd  Family = 0x6  Model = 0xf  Stepping = 13
        Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0xe39d <sse3,dtes64,mon,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm>AMD Features=0x20000800 <syscall,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant, performance statistics
      real memory  = 4294967296 (4096 MB)
      Physical memory chunk(s):
      0x0000000000010000 - 0x0000000000099fff, 565248 bytes (138 pages)
      0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
      0x00000000024f6000 - 0x00000000b73f0fff, 3035607040 bytes (741115 pages)
      0x0000000100000000 - 0x000000013ffe7fff, 1073643520 bytes (262120 pages)
      avail memory = 4088520704 (3899 MB)
      Event timer "LAPIC" quality 400
      ACPI APIC Table: <ptltd   ="" apic ="">INTR: Adding local APIC 1 as a target
      FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
      FreeBSD/SMP: 1 package(s) x 2 core(s)
      cpu0 (BSP): APIC ID:  0
      cpu1 (AP): APIC ID:  1
      APIC: CPU 0 has ACPI ID 0
      APIC: CPU 1 has ACPI ID 1
      x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
      x86bios: SSEG 0x098000-0x098fff at 0xfffffe003f3a4000
      x86bios: EBDA 0x09d000-0x09ffff at 0xfffff8000009d000
      x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
      XEN: CPU 0 has VCPU ID 0
      XEN: CPU 1 has VCPU ID 1
      ULE: setup cpu 0
      ULE: setup cpu 1
      ACPI: RSDP 0xf7260 00014 (v00 PTLTD )
      ACPI: RSDT 0xbf683b6d 00060 (v01 PTLTD    RSDT  06040000  LTP 00000000)
      ACPI: FACP 0xbf68ad08 00084 (v01 SUPRMC          06040000 PTL  00000003)
      ACPI: DSDT 0xbf68569f 05669 (v01  INTEL BR_WATER 06040000 MSFT 03000001)
      ACPI: FACS 0xbf68bfc0 00040
      ACPI: TCPA 0xbf68ad8c 00032 (v01 SMC            06040000 PTL  00000000)
      ACPI: MCFG 0xbf68adbe 0003C (v01 PTLTD    MCFG  06040000  LTP 00000000)
      ACPI: APIC 0xbf68adfa 00068 (v01 PTLTD  ? APIC  06040000  LTP 00000000)
      ACPI: BOOT 0xbf68ae62 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
      ACPI: SLIC 0xbf68ae8a 00176 (v01 OEMID_ OEMTABLE 06040000  LTP 00000000)
      ACPI: SSDT 0xbf685440 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050228)
      ACPI: SSDT 0xbf68539a 000A6 (v01  PmRef  Cpu7Tst 00003000 INTL 20050228)
      ACPI: SSDT 0xbf6852f4 000A6 (v01  PmRef  Cpu6Tst 00003000 INTL 20050228)
      ACPI: SSDT 0xbf68524e 000A6 (v01  PmRef  Cpu5Tst 00003000 INTL 20050228)
      ACPI: SSDT 0xbf6851a8 000A6 (v01  PmRef  Cpu4Tst 00003000 INTL 20050228)
      ACPI: SSDT 0xbf685102 000A6 (v01  PmRef  Cpu3Tst 00003000 INTL 20050228)
      ACPI: SSDT 0xbf68505c 000A6 (v01  PmRef  Cpu2Tst 00003000 INTL 20050228)
      ACPI: SSDT 0xbf684fb6 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050228)
      ACPI: SSDT 0xbf683bcd 013E9 (v01  PmRef    CpuPm 00003000 INTL 20050228)
      MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
      ioapic0: Routing external 8259A's -> intpin 0
      lapic0: Routing NMI -> LINT1
      lapic0: LINT1 trigger: edge
      lapic0: LINT1 polarity: high
      lapic1: Routing NMI -> LINT1
      lapic1: LINT1 trigger: edge
      lapic1: LINT1 polarity: high
      MADT: Interrupt override: source 0, irq 2
      ioapic0: Routing IRQ 0 -> intpin 2
      MADT: Interrupt override: source 9, irq 9
      ioapic0: intpin 9 trigger: level
      ioapic0 <version 2.0="">irqs 0-23 on motherboard
      cpu0 BSP:
          ID: 0x00000000  VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
        lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
        timer: 0x000100ef therm: 0x00000200 err: 0x000000f0 pmc: 0x00010400
      firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xffffffff81a1b80c
      firmware: 'iwn5000fw' version 0: 340696 bytes loaded at 0xffffffff81a496fc
      firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xffffffff81a9ca84
      firmware: 'iwn6000fw' version 0: 454608 bytes loaded at 0xffffffff81aef12c
      firmware: 'wpifw' version 153229: 150100 bytes loaded at 0xffffffff81df6cc4
      firmware: 'iwn6000g2afw' version 0: 444128 bytes loaded at 0xffffffff81b5e1ac
      firmware: 'iwn6000g2bfw' version 0: 460912 bytes loaded at 0xffffffff81bca93c
      firmware: 'iwn6050fw' version 0: 469780 bytes loaded at 0xffffffff81c3b25c
      snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
      feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
      firmware: 't4fw_cfg' version 0: 3059 bytes loaded at 0xffffffff8164c804
      firmware: 't4fw_cfg_uwire' version 0: 21284 bytes loaded at 0xffffffff8164d3f7
      firmware: 't4fw' version 0: 512512 bytes loaded at 0xffffffff8165271b
      firmware: 't5fw_cfg' version 0: 3435 bytes loaded at 0xffffffff816cf9cc
      firmware: 't5fw' version 0: 513024 bytes loaded at 0xffffffff816d0737
      firmware: 'mw88W8363fw' version 0: 94940 bytes loaded at 0xffffffff81cb992c
      firmware: 'mwlboot' version 0: 2280 bytes loaded at 0xffffffff81cd0c08
      firmware: 'rsu-rtl8712fw' version 120: 122328 bytes loaded at 0xffffffff81dbaae4
      firmware: 'runfw' version 0: 8192 bytes loaded at 0xffffffff81dd8ca4
      firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0xffffffff81d5aff4
      wlan: mac acl policy registered
      firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0xffffffff81d5d0a4
      firmware: 'urtwn-rtl8188eufw' version 111: 13904 bytes loaded at 0xffffffff81ddb5dc
      firmware: 'urtwn-rtl8192cfwT' version 111: 16076 bytes loaded at 0xffffffff81ddecdc
      firmware: 'urtwn-rtl8192cfwU' version 111: 16076 bytes loaded at 0xffffffff81de2c54
      firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0xffffffff81d5f154
      firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0xffffffff81d61204
      firmware: 'mxge_eth_z8e' version 377284: 120629 bytes loaded at 0xffffffff81cd16c0
      wlan: <802.11 Link Layer>
      firmware: 'mxge_ethp_z8e' version 387604: 121317 bytes loaded at 0xffffffff81ceeeb0
      firmware: 'mxge_rss_eth_z8e' version 534724: 151912 bytes loaded at 0xffffffff81d0c950
      firmware: 'mxge_rss_ethp_z8e' version 544468: 152837 bytes loaded at 0xffffffff81d31b70
      ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
      ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
      module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80606640, 0) error 1
      ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
      ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
      module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806066f0, 0) error 1
      ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
      ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
      module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff806067a0, 0) error 1
      iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
      iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
      module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8062de10, 0) error 1
      iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
      iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
      module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8062dec0, 0) error 1
      iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
      iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
      module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8062df70, 0) error 1
      firmware: 'iwn1000fw' version 0: 337520 bytes loaded at 0xffffffff8187260c
      firmware: 'iwn2000fw' version 0: 695876 bytes loaded at 0xffffffff818c4d2c
      firmware: 'iwn2030fw' version 0: 707392 bytes loaded at 0xffffffff8196ec1c
      Hardware, Intel Secure Key RNG: RDRAND is not present
      Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
      null: <null device,="" zero="" device="">Falling back to <software, yarrow="">random adaptor
      random: <software, yarrow="">initialized
      nfslock: pseudo-device
      crypto: <crypto core="">VESA: INT 0x10 vector 0xc000:0x0014
      VESA: information block
      0000  56 45 53 41 00 03 00 01 00 99 01 00 00 00 40 00
      0010  00 99 77 00 00 01 38 01 00 99 4a 01 00 99 73 01
      0020  00 99 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      0030  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      0040  60 01 61 01 62 01 63 01 64 01 65 01 66 01 67 01
      0050  68 01 3c 01 4d 01 5c 01 3a 01 4b 01 5a 01 07 01
      0060  1a 01 1b 01 05 01 17 01 18 01 12 01 14 01 15 01
      0070  01 01 03 01 11 01 ff ff 00 00 00 00 00 00 00 00
      0080  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      0090  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      00a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      00b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      00c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      00d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      00e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      00f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      0100  49 6e 74 65 6c 28 72 29 42 72 6f 61 64 77 61 74
      0110  65 72 2d 47 20 47 72 61 70 68 69 63 73 20 43 68
      0120  69 70 20 41 63 63 65 6c 65 72 61 74 65 64 20 56
      0130  47 41 20 42 49 4f 53 00 49 6e 74 65 6c 20 43 6f
      0140  72 70 6f 72 61 74 69 6f 6e 00 49 6e 74 65 6c 28
      0150  72 29 42 72 6f 61 64 77 61 74 65 72 2d 47 20 47
      0160  72 61 70 68 69 63 73 20 43 6f 6e 74 72 6f 6c 6c
      0170  65 72 00 48 61 72 64 77 61 72 65 20 56 65 72 73
      0180  69 6f 6e 20 30 2e 30 00 00 00 00 00 00 00 00 00
      0190  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      01a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      01b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      01c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      01d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      01e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      01f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      VESA: 17 mode(s) found
      VESA: v3.0, 7616k memory, flags:0x1, mode table:0xfffffe003f3fa040 (99000040)
      VESA: Intel(r)Broadwater-G Graphics Chip Accelerated VGA BIOS
      VESA: Intel Corporation Intel(r)Broadwater-G Graphics Controller Hardware Version 0.0
      io: VMBUS: load
      kbd: new array size 4
      kbd1 at kbdmux0
      mem: <memory>hpt27xx: RocketRAID 27xx controller driver v1.1
      hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
      hptnr: R750/DC7280 controller driver v1.0.1
      cryptosoft0: <software crypto="">on motherboard
      crypto: assign cryptosoft0 driver id 0, flags 100663296
      crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
      crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
      padlock0: No ACE support.
      acpi0: <ptltd  rsdt="">on motherboard
      ACPI: All ACPI Tables successfully acquired
      PCIe: Memory Mapped configuration base @ 0xe0000000
      ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
      acpi0: Power Button (fixed)
      cpu0: Processor \134_PR      .CPU0 (ACPI ID 0) -> APIC ID 0
      cpu0: <acpi cpu="">on acpi0
      cpu0: switching to generic Cx mode
      cpu1: Processor \134_PR_.CPU1 (ACPI ID 1) -> APIC ID 1
      cpu1: <acpi cpu="">on acpi0
      ACPI: Processor \134_PR_.CPU2 (ACPI ID 2) ignored
      ACPI: Processor \134_PR_.CPU3 (ACPI ID 3) ignored
      ACPI: Processor \134_PR_.CPU4 (ACPI ID 4) ignored
      ACPI: Processor \134_PR_.CPU5 (ACPI ID 5) ignored
      ACPI: Processor \134_PR_.CPU6 (ACPI ID 6) ignored
      ACPI: Processor \134_PR_.CPU7 (ACPI ID 7) ignored
      atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
      atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
      ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
      Event timer "RTC" frequency 32768 Hz quality 0
      attimer0: <at timer="">port 0x40-0x43,0x50-0x53 irq 0 on acpi0
      Timecounter "i8254" frequency 1193182 Hz quality 0
      ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 50
      Event timer "i8254" frequency 1193182 Hz quality 100
      ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
      Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
      acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
      pci_link0:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe      0  10  N    0  3 4 5 6 7 10 11 12 14 15
        Validation          0  10  N    0  3 4 5 6 7 10 11 12 14 15
        After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
      pci_link1:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe      0  11  N    0  3 4 5 6 7 10 11 12 14 15
        Validation          0  11  N    0  3 4 5 6 7 10 11 12 14 15
        After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
      pci_link2:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe      0    5  N    0  3 4 5 6 7 10 11 12 14 15
        Validation          0    5  N    0  3 4 5 6 7 10 11 12 14 15
        After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
      pci_link3:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe      0    7  N    0  3 4 5 6 7 10 11 12 14 15
        Validation          0    7  N    0  3 4 5 6 7 10 11 12 14 15
        After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
      pci_link4:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe      0  255  N    0  3 4 5 6 7 10 11 12 14 15
        Validation          0  255  N    0  3 4 5 6 7 10 11 12 14 15
        After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
      pci_link5:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe      0  255  N    0  3 4 5 6 7 10 11 12 14 15
        Validation          0  255  N    0  3 4 5 6 7 10 11 12 14 15
        After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
      pci_link6:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe      0  255  N    0  3 4 5 6 7 10 11 12 14 15
        Validation          0  255  N    0  3 4 5 6 7 10 11 12 14 15
        After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
      pci_link7:        Index  IRQ  Rtd  Ref  IRQs
        Initial Probe      0  255  N    0  3 4 5 6 7 10 11 12 14 15
        Validation          0  255  N    0  3 4 5 6 7 10 11 12 14 15
        After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
      pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
      pcib0: decoding 4 range 0-0xcf7
      pcib0: decoding 3 range 0xa0000-0xbffff
      pcib0: decoding 3 range 0xd0000-0xd3fff
      pcib0: decoding 3 range 0xd4000-0xd7fff
      pcib0: decoding 3 range 0xd8000-0xdbfff
      pcib0: decoding 3 range 0xdc000-0xdffff
      pcib0: decoding 3 range 0xe0000-0xe3fff
      pcib0: decoding 3 range 0xc0000000-0xdfffffff
      pcib0: decoding 4 range 0xd00-0xfdff
      pcib0: decoding 3 range 0xfed40000-0xfed44fff
      pci0: <acpi pci="" bus="">on pcib0
      pci0: domain=0, physical bus=0
      found-> vendor=0x8086, dev=0x2970, revid=0x02
              domain=0, bus=0, slot=0, func=0
              class=06-00-00, hdrtype=0x00, mfdev=0
              cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      found-> vendor=0x8086, dev=0x2972, revid=0x02
              domain=0, bus=0, slot=2, func=0
              class=03-00-00, hdrtype=0x00, mfdev=0
              cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
              intpin=a, irq=10
              powerspec 2  supports D0 D3  current D0
              MSI supports 1 message
              map[10]: type Memory, range 32, base 0xd0000000, size 20, enabled
      pcib0: allocated type 3 (0xd0000000-0xd00fffff) for rid 10 of pci0:0:2:0
              map[18]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
      pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 18 of pci0:0:2:0
              map[20]: type I/O Port, range 32, base 0x30b0, size  3, enabled
      pcib0: allocated type 4 (0x30b0-0x30b7) for rid 20 of pci0:0:2:0
      pcib0: matched entry for 0.2.INTA
      pcib0: slot 2 INTA hardwired to IRQ 16
      found-> vendor=0x8086, dev=0x27d0, revid=0x01
              domain=0, bus=0, slot=28, func=0
              class=06-04-00, hdrtype=0x01, mfdev=1
              cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
              intpin=a, irq=10
              powerspec 2  supports D0 D3  current D0
              MSI supports 1 message
      pcib0: matched entry for 0.28.INTA
      pcib0: slot 28 INTA hardwired to IRQ 16
      found-> vendor=0x8086, dev=0x27e0, revid=0x01
              domain=0, bus=0, slot=28, func=4
              class=06-04-00, hdrtype=0x01, mfdev=1
              cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
              intpin=a, irq=10
              powerspec 2  supports D0 D3  current D0
              MSI supports 1 message
      pcib0: matched entry for 0.28.INTA
      pcib0: slot 28 INTA hardwired to IRQ 16
      found-> vendor=0x8086, dev=0x27e2, revid=0x01
              domain=0, bus=0, slot=28, func=5
              class=06-04-00, hdrtype=0x01, mfdev=1
              cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
              intpin=b, irq=11
              powerspec 2  supports D0 D3  current D0
              MSI supports 1 message
      pcib0: matched entry for 0.28.INTB
      pcib0: slot 28 INTB hardwired to IRQ 17
      found-> vendor=0x8086, dev=0x27c8, revid=0x01
              domain=0, bus=0, slot=29, func=0
              class=0c-03-00, hdrtype=0x00, mfdev=1
              cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
              intpin=a, irq=10
              map[20]: type I/O Port, range 32, base 0x3000, size  5, enabled
      pcib0: allocated type 4 (0x3000-0x301f) for rid 20 of pci0:0:29:0
      pcib0: matched entry for 0.29.INTA
      pcib0: slot 29 INTA hardwired to IRQ 16
      found-> vendor=0x8086, dev=0x27c9, revid=0x01
              domain=0, bus=0, slot=29, func=1
              class=0c-03-00, hdrtype=0x00, mfdev=0
              cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
              intpin=b, irq=11
              map[20]: type I/O Port, range 32, base 0x3020, size  5, enabled
      pcib0: allocated type 4 (0x3020-0x303f) for rid 20 of pci0:0:29:1
      pcib0: matched entry for 0.29.INTB
      pcib0: slot 29 INTB hardwired to IRQ 17
      found-> vendor=0x8086, dev=0x27ca, revid=0x01
              domain=0, bus=0, slot=29, func=2
              class=0c-03-00, hdrtype=0x00, mfdev=0
              cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
              intpin=c, irq=5
              map[20]: type I/O Port, range 32, base 0x3040, size  5, enabled
      pcib0: allocated type 4 (0x3040-0x305f) for rid 20 of pci0:0:29:2
      pcib0: matched entry for 0.29.INTC
      pcib0: slot 29 INTC hardwired to IRQ 18
      found-> vendor=0x8086, dev=0x27cb, revid=0x01
              domain=0, bus=0, slot=29, func=3
              class=0c-03-00, hdrtype=0x00, mfdev=0
              cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
              intpin=d, irq=7
              map[20]: type I/O Port, range 32, base 0x3060, size  5, enabled
      pcib0: allocated type 4 (0x3060-0x307f) for rid 20 of pci0:0:29:3
      pcib0: matched entry for 0.29.INTD
      pcib0: slot 29 INTD hardwired to IRQ 19
      found-> vendor=0x8086, dev=0x27cc, revid=0x01
              domain=0, bus=0, slot=29, func=7
              class=0c-03-20, hdrtype=0x00, mfdev=0
              cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
              intpin=a, irq=10
              powerspec 2  supports D0 D3  current D0
              map[10]: type Memory, range 32, base 0xd0400000, size 10, enabled
      pcib0: allocated type 3 (0xd0400000-0xd04003ff) for rid 10 of pci0:0:29:7
      pcib0: matched entry for 0.29.INTA
      pcib0: slot 29 INTA hardwired to IRQ 16
      found-> vendor=0x8086, dev=0x244e, revid=0xe1
              domain=0, bus=0, slot=30, func=0
              class=06-04-01, hdrtype=0x01, mfdev=0
              cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
      found-> vendor=0x8086, dev=0x27b8, revid=0x01
              domain=0, bus=0, slot=31, func=0
              class=06-01-00, hdrtype=0x00, mfdev=1
              cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
      found-> vendor=0x8086, dev=0x27c1, revid=0x01
              domain=0, bus=0, slot=31, func=2
              class=01-06-01, hdrtype=0x00, mfdev=0
              cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
              intpin=b, irq=11
              powerspec 2  supports D0 D3  current D0
              MSI supports 1 message
              map[10]: type I/O Port, range 32, base 0x30c8, size  3, enabled
      pcib0: allocated type 4 (0x30c8-0x30cf) for rid 10 of pci0:0:31:2
              map[14]: type I/O Port, range 32, base 0x30bc, size  2, enabled
      pcib0: allocated type 4 (0x30bc-0x30bf) for rid 14 of pci0:0:31:2
              map[18]: type I/O Port, range 32, base 0x30c0, size  3, enabled
      pcib0: allocated type 4 (0x30c0-0x30c7) for rid 18 of pci0:0:31:2
              map[1c]: type I/O Port, range 32, base 0x30b8, size  2, enabled
      pcib0: allocated type 4 (0x30b8-0x30bb) for rid 1c of pci0:0:31:2
              map[20]: type I/O Port, range 32, base 0x30a0, size  4, enabled
      pcib0: allocated type 4 (0x30a0-0x30af) for rid 20 of pci0:0:31:2
              map[24]: type Memory, range 32, base 0xd0400400, size 10, enabled
      pcib0: allocated type 3 (0xd0400400-0xd04007ff) for rid 24 of pci0:0:31:2
      pcib0: matched entry for 0.31.INTB
      pcib0: slot 31 INTB hardwired to IRQ 17
      found-> vendor=0x8086, dev=0x27da, revid=0x01
              domain=0, bus=0, slot=31, func=3
              class=0c-05-00, hdrtype=0x00, mfdev=0
              cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
              lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
              intpin=b, irq=11
              map[20]: type I/O Port, range 32, base 0x1100, size  5, enabled
      pcib0: allocated type 4 (0x1100-0x111f) for rid 20 of pci0:0:31:3
      pcib0: matched entry for 0.31.INTB
      pcib0: slot 31 INTB hardwired to IRQ 17
      vgapci0: <vga-compatible display="">port 0x30b0-0x30b7 mem 0xd0000000-0xd00fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
      agp0: <intel 946gz="" svga="" controller="">on vgapci0
      pcib0: allocated type 3 (0xd0100000-0xd0100fff) for rid 64 of agp0
      agp0: Allocated flush page phys 0xd0100000 virt 0xfffff800d0100000
      agp0: aperture size is 256M, detected 7676k stolen memory
      agp0: AGP_I965_PGTBL_CTL2: 00000000
      agp0: AGP_I855_GCC1: 0x30
      agp0: AGP_I965_MSAC: 0x00
      agp0: Mappable GTT entries: 65536
      agp0: Total GTT entries: 131072
      vgapci0: Boot video device
      pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
      pcib1:  domain            0
      pcib1:  secondary bus    1
      pcib1:  subordinate bus  1
      pci1: <acpi pci="" bus="">on pcib1
      pci1: domain=0, physical bus=1
      pcib2: <acpi pci-pci="" bridge="">irq 16 at device 28.4 on pci0
      pcib2:  domain            0
      pcib2:  secondary bus    2
      pcib2:  subordinate bus  2
      pcib2:  special decode    ISA
      pci2: <acpi pci="" bus="">on pcib2
      pci2: domain=0, physical bus=2
      pcib3: <acpi pci-pci="" bridge="">irq 17 at device 28.5 on pci0
      pcib3: failed to allocate initial I/O port window: 0-0xfff
      pcib3: failed to allocate initial memory window: 0-0xfffff
      pcib3: failed to allocate initial prefetch window: 0-0xfffff
      pcib3:  domain            0
      pcib3:  secondary bus    3
      pcib3:  subordinate bus  3
      pci3: <acpi pci="" bus="">on pcib3
      pci3: domain=0, physical bus=3
      uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0x3000-0x301f irq 16 at device 29.0 on pci0
      ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51
      usbus0 on uhci0
      uhci0: usbpf: Attached
      uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0x3020-0x303f irq 17 at device 29.1 on pci0
      ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 52
      usbus1 on uhci1
      uhci1: usbpf: Attached
      uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0x3040-0x305f irq 18 at device 29.2 on pci0
      ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53
      usbus2 on uhci2
      uhci2: usbpf: Attached
      uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0x3060-0x307f irq 19 at device 29.3 on pci0
      ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54
      usbus3 on uhci3
      uhci3: usbpf: Attached
      ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xd0400000-0xd04003ff irq 16 at device 29.7 on pci0
      usbus4: EHCI version 1.0
      usbus4 on ehci0
      ehci0: usbpf: Attached
      pcib4: <acpi pci-pci="" bridge="">at device 30.0 on pci0
      pcib4: allocating non-ISA range 0x4000-0x40ff
      pcib0: allocated type 4 (0x4000-0x40ff) for rid 1c of pcib4
      pcib4: allocating non-ISA range 0x4400-0x44ff
      pcib0: allocated type 4 (0x4400-0x44ff) for rid 1c of pcib4
      pcib4: allocating non-ISA range 0x4800-0x48ff
      pcib0: allocated type 4 (0x4800-0x48ff) for rid 1c of pcib4
      pcib4: allocating non-ISA range 0x4c00-0x4cff
      pcib0: allocated type 4 (0x4c00-0x4cff) for rid 1c of pcib4
      pcib4: failed to allocate initial memory window: 0xd0100000-0xd01fffff
      pcib4:  domain            0
      pcib4:  secondary bus    4
      pcib4:  subordinate bus  4
      pcib4:  I/O decode        0x4000-0x4fff
      pcib4:  special decode    ISA, subtractive
      pci4: <acpi pci="" bus="">on pcib4
      pci4: domain=0, physical bus=4
      found-> vendor=0x8086, dev=0x1079, revid=0x03
              domain=0, bus=4, slot=0, func=0
              class=02-00-00, hdrtype=0x00, mfdev=1
              cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
              lattimer=0x34 (1560 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
              intpin=a, irq=10
              powerspec 2  supports D0 D3  current D0
              map[10]: type Memory, range 64, base 0xd0180000, size 17, enabled
      pcib0: allocated type 3 (0xd0180000-0xd019ffff) for rid 10 of pci0:4:0:0
              map[18]: type Memory, range 64, base 0xd0100000, size 18, enabled
      pci4: pci0:4:0:0 bar 0x18 failed to allocate
              map[20]: type I/O Port, range 32, base 0x4000, size  6, enabled
      pcib4: allocated I/O port range (0x4000-0x403f) for rid 20 of pci0:4:0:0
      pcib4: matched entry for 4.0.INTA
      pcib4: slot 0 INTA hardwired to IRQ 16
      found-> vendor=0x8086, dev=0x1079, revid=0x03
              domain=0, bus=4, slot=0, func=1
              class=02-00-00, hdrtype=0x00, mfdev=1
              cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
              lattimer=0x34 (1560 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
              intpin=b, irq=11
              powerspec 2  supports D0 D3  current D0
              map[10]: type Memory, range 64, base 0xd01a0000, size 17, enabled
      pcib0: allocated type 3 (0xd01a0000-0xd01bffff) for rid 10 of pci0:4:0:1
              map[18]: type Memory, range 64, base 0xd0140000, size 18, enabled
      pcib0: allocated type 3 (0xd0140000-0xd017ffff) for rid 18 of pci0:4:0:1
              map[20]: type I/O Port, range 32, base 0x4040, size  6, enabled
      pcib4: allocated I/O port range (0x4040-0x407f) for rid 20 of pci0:4:0:1
      pcib4: matched entry for 4.0.INTB
      pcib4: slot 0 INTB hardwired to IRQ 17
      em0: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.6="">port 0x4000-0x403f mem 0xd0180000-0xd019ffff irq 16 at device 0.0 on pci4
      em0: bpf attached
      em1: <intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.6="">port 0x4040-0x407f mem 0xd01a0000-0xd01bffff,0xd0140000-0xd017ffff irq 17 at device 0.1 on pci4
      em1: bpf attached
      isab0: <pci-isa bridge="">at device 31.0 on pci0
      isa0: <isa bus="">on isab0
      ahci0: <intel ich7="" ahci="" sata="" controller="">port 0x30c8-0x30cf,0x30bc-0x30bf,0x30c0-0x30c7,0x30b8-0x30bb,0x30a0-0x30af mem 0xd0400400-0xd04007ff irq 17 at device 31.2 on pci0
      ahci0: attempting to allocate 1 MSI vectors (1 supported)
      msi: routing MSI IRQ 256 to local APIC 0 vector 55
      ahci0: using IRQ 256 for MSI
      ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
      ahci0: Caps: 64bit NCQ ALP AL CLO 3Gbps PMD SSC PSC 32cmd 4ports
      ahcich0: <ahci channel="">at channel 0 on ahci0
      ahcich0: Caps: HPCP
      ahcich1: <ahci channel="">at channel 1 on ahci0
      ahcich1: Caps: HPCP
      ahcich2: <ahci channel="">at channel 2 on ahci0
      ahcich2: Caps: HPCP
      ahcich3: <ahci channel="">at channel 3 on ahci0
      ahcich3: Caps: HPCP
      pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
      acpi_button0: <power button="">on acpi0
      atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
      atkbd0: <at keyboard="">irq 1 on atkbdc0
      atkbd: the current kbd controller command byte 0067
      atkbd: keyboard ID 0xffffffff (1)
      atkbd: failed to reset the keyboard.
      kbd0 at atkbd0
      kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
      ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56
      atkbd0: [GIANT-LOCKED]
      psm0: unable to allocate IRQ
      psmcpnp0: <ps 2="" mouse="" port="">irq 12 on acpi0
      psm0: current command byte:0067
      psm0: failed to reset the aux device.
      fdc0: <floppy drive="" controller="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
      fdc0: ic_type 90 part_id 80
      ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 57
      acpi0: wakeup code va 0xfffffe0045d84000 pa 0x94000
      ahc_isa_identify 0: ioport 0xc00 alloc failed
      ahc_isa_identify 1: ioport 0x1c00 alloc failed
      ahc_isa_identify 2: ioport 0x2c00 alloc failed
      ahc_isa_identify 3: ioport 0x3c00 alloc failed
      ahc_isa_identify 4: ioport 0x4c00 alloc failed
      ahc_isa_identify 5: ioport 0x5c00 alloc failed
      ahc_isa_identify 6: ioport 0x6c00 alloc failed
      ahc_isa_identify 7: ioport 0x7c00 alloc failed
      ahc_isa_identify 8: ioport 0x8c00 alloc failed
      ahc_isa_identify 9: ioport 0x9c00 alloc failed
      ahc_isa_identify 10: ioport 0xac00 alloc failed
      ahc_isa_identify 11: ioport 0xbc00 alloc failed
      ahc_isa_identify 12: ioport 0xcc00 alloc failed
      ahc_isa_identify 13: ioport 0xdc00 alloc failed
      ahc_isa_identify 14: ioport 0xec00 alloc failed
      ex_isa_identify()
      pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
      pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
      pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
      pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
      pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
      pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
      pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
      pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
      pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
      pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
      pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
      pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
      pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
      pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xda000-0xda7ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xda800-0xdafff) for rid 2 of orm0
      pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 2 of orm0
      pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 2 of orm0
      pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xdd800-0xddfff) for rid 2 of orm0
      pcib0: allocated type 3 (0xde000-0xde7ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xde800-0xdefff) for rid 2 of orm0
      pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xdf800-0xdffff) for rid 2 of orm0
      pcib0: allocated type 3 (0xe0000-0xe07ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xe0800-0xe0fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xe1000-0xe17ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xe1800-0xe1fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xe2000-0xe27ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xe2800-0xe2fff) for rid 2 of orm0
      pcib0: allocated type 3 (0xe3000-0xe37ff) for rid 2 of orm0
      pcib0: allocated type 3 (0xe3800-0xe3fff) for rid 2 of orm0
      isa_probe_children: disabling PnP devices
      atkbdc: atkbdc0 already exists; skipping it
      atrtc: atrtc0 already exists; skipping it
      attimer: attimer0 already exists; skipping it
      fdc: fdc0 already exists; skipping it
      sc: sc0 already exists; skipping it
      isa_probe_children: probing non-PnP devices
      orm0: <isa option="" roms="">at iomem 0xc0000-0xcafff,0xcb000-0xcbfff on isa0
      sc0: <system console="">at flags 0x100 on isa0
      sc0: VGA <16 virtual consoles, flags=0x300>
      sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
      vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
      pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
      pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
      ppc0: cannot reserve I/O port range
      ppc0 failed to probe at irq 7 on isa0
      pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
      uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0
      pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
      uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
      wbwd0 failed to probe on isa0
      isa_probe_children: probing PnP devices
      est0: enabling SpeedStep
      est0: <enhanced speedstep="" frequency="" control="">on cpu0
      est: CPU supports Enhanced Speedstep, but is not recognized.
      est: cpu_vendor GenuineIntel, msr b200b2006000b20
      device_attach: est0 attach returned 6
      p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
      est1: <enhanced speedstep="" frequency="" control="">on cpu1
      est: CPU supports Enhanced Speedstep, but is not recognized.
      est: cpu_vendor GenuineIntel, msr b200b2006000b20
      device_attach: est1 attach returned 6
      p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
      Device configuration finished.
      procfs registered
      lapic: Divisor 2, Frequency 99751952 Hz
      Timecounters tick every 1.000 msec
      pflog0: bpf attached
      crypto: <crypto device="">vlan: initialized, using hash tables with chaining
      tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768
      IPsec: Initialized Security Association Processing.
      pfsync0: bpf attached
      lo0: bpf attached
      enc0: bpf attached
      hpt27xx: no controller detected.
      hptrr: no controller detected.
      hptnr: no controller detected.
      random: unblocking device.
      usbus0: 12Mbps Full Speed USB v1.0
      usbus1: 12Mbps Full Speed USB v1.0
      usbus2: 12Mbps Full Speed USB v1.0
      usbus3: 12Mbps Full Speed USB v1.0
      usbus4: 480Mbps High Speed USB v2.0
      ahcich0: AHCI reset…
      ahcich0: SATA connect time=900us status=00000113
      ahcich0: AHCI reset: device found
      ahcich1: AHCI reset...
      ahcich1: SATA offline status=00000004
      ahcich1: AHCI reset: device not found
      ahcich2: AHCI reset...
      ugen1.1: <intel>at usbus1
      uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
      ugen0.1: <intel>at usbus0
      uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
      ugen3.1: <intel>at usbus3
      uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
      ugen2.1: <intel>at usbus2
      uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
      ugen4.1: <intel>at usbus4
      uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
      ahcich2: SATA connect time=1000us status=00000113
      ahcich2: AHCI reset: device found
      ahcich2: AHCI reset: device ready after 0ms
      ahcich3: AHCI reset...
      ahcich3: SATA offline status=00000004
      ahcich3: AHCI reset: device not found
      ahcich0: AHCI reset: device ready after 100ms
      pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
      GEOM: new disk cd0
      cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
      cd0: <tsstcorp cddvdw="" ts-h653n="" 0208="">Removable CD-ROM SCSI-0 device
      cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
      cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
      pass0: <st3250310as 3.aaf="">ATA-7 SATA 1.x device
      pass0: Serial Number 6RYAJH0Y
      pass0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
      pass0: Command Queueing enabled
      pass1 at ahcich2 bus 0 scbus2 target 0 lun 0
      pass1: <tsstcorp cddvdw="" ts-h653n="" 0208="">Removable CD-ROM SCSI-0 device
      pass1: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
      ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
      ada0: <st3250310as 3.aaf="">ATA-7 SATA 1.x device
      ada0: Serial Number 6RYAJH0Y
      ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
      ada0: Command Queueing enabled
      ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
      ada0: Previously was known as ad4
      GEOM: new disk ada0
      Netvsc initializing... done!
      SMP: AP CPU #1 Launched!
      cpu1 AP:
          ID: 0x01000000  VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
        lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
        timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
      ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
      ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 49
      ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50
      ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51
      SMP: passed TSC synchronization test
      TSC timecounter discards lower 1 bit(s)
      Timecounter "TSC-low" frequency 1097271219 Hz quality 1000
      Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
      uhub0: 2 ports with 2 removable, self powered
      uhub1: 2 ports with 2 removable, self powered
      uhub2: 2 ports with 2 removable, self powered
      uhub3: 2 ports with 2 removable, self powered
      Root mount waiting for: usbus4
      Root mount waiting for: usbus4
      uhub4: 8 ports with 8 removable, self powered
      Root mount waiting for: usbus4
      Trying to mount root from ufs:/dev/ada0s1a [rw]…
      WARNING: / was not properly dismounted
      start_init: trying /sbin/init
      ugen0.2: <microsoft>at usbus0
      ukbd0: <microsoft 0="" 2="" natural="" ergonomic="" keyboard="" 4000,="" class="" 0,="" rev="" 2.00="" 1.73,="" addr="">on usbus0
      kbd2 at ukbd0
      kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
      uhid0: <microsoft 0="" 2="" natural="" ergonomic="" keyboard="" 4000,="" class="" 0,="" rev="" 2.00="" 1.73,="" addr="">on usbus0
      ugen3.2: <crystalfontz america="">at usbus3
      umodem0: <crystalfontz 2="" america="" cfa-735="" display,="" class="" 0,="" rev="" 2.00="" 2.00,="" addr="">on usbus3
      umodem0: data interface 1, has no CM over data, has no break
      coretemp0: <cpu on-die="" thermal="" sensors="">on cpu0
      coretemp0: Setting TjMax=85
      est0: <enhanced speedstep="" frequency="" control="">on cpu0
      est: CPU supports Enhanced Speedstep, but is not recognized.
      est: cpu_vendor GenuineIntel, msr b200b2006000b20
      device_attach: est0 attach returned 6
      coretemp1: <cpu on-die="" thermal="" sensors="">on cpu1
      coretemp1: Setting TjMax=85
      est1: <enhanced speedstep="" frequency="" control="">on cpu1
      est: CPU supports Enhanced Speedstep, but is not recognized.
      est: cpu_vendor GenuineIntel, msr b200b2006000b20
      device_attach: est1 attach returned 6
      em1: Link is up 1000 Mbps Full Duplex
      em1: link state changed to UP
      pflog0: promiscuous mode enabled
      em0: Link is up 1000 Mbps Full Duplex
      em0: link state changed to UP
      em1: promiscuous mode enabled
      em0: promiscuous mode enabled
      [2.2-RC]</enhanced></cpu></enhanced></cpu></crystalfontz></crystalfontz></microsoft></microsoft></microsoft></st3250310as></tsstcorp></st3250310as></tsstcorp></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></crypto></cpu></enhanced></cpu></enhanced></generic></system></isa></floppy></ps></at></keyboard></power></serial></ahci></ahci></ahci></ahci></intel></isa></pci-isa></intel(r)></intel(r)></acpi></acpi></intel></intel></intel></intel></intel></acpi></acpi></acpi></acpi></acpi></acpi></intel></vga-compatible></acpi></acpi></at></at></acpi></acpi></ptltd ></software></memory>_</crypto></software,></software,></null></version></ptltd ></lahf></syscall,lm></sse3,dtes64,mon,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

      Dell 2950 g3 server
      Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
      Current: 2000 MHz, Max: 2667 MHz
      8 CPUs: 2 package(s) x 4 core(s)
      8152 MiB and 600meg 10k drive
      Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

      1 Reply Last reply Reply Quote 0
      • T
        Topper727
        last edited by

        Here is with the built on lan ports and the USB lan to get 2 ports.

        LOADER.CONF

        autoboot_delay="3"
        vm.kmem_size="435544320"
        vm.kmem_size_max="535544320"
        hw.acpi.host_mem_start="0xf0000000"
        boot_verbose="1"
        comconsole_speed="115200"
        hw.usb.no_pf="1"

        dmesg log

        Table 'FACP' at 0xbf68ad08
        Table 'TCPA' at 0xbf68ad8c
        Table 'MCFG' at 0xbf68adbe
        Table 'APIC' at 0xbf68adfa
        APIC: Found table at 0xbf68adfa
        APIC: Using the MADT enumerator.
        MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
        SMP: Added CPU 0 (AP)
        MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
        SMP: Added CPU 1 (AP)
        Copyright © 1992-2014 The FreeBSD Project.
        Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                The Regents of the University of California. All rights reserved.
        FreeBSD is a registered trademark of The FreeBSD Foundation.
        FreeBSD 10.1-RELEASE-p1 #0 fd28f0b(releng/10.1)-dirty: Sun Dec 14 23:42:20 CST 2014
            root@pfsense-22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64
        FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
        Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff824c7000.
        Calibrating TSC clock ... TSC clock: 2194546673 Hz
        CPU: Intel(R) Pentium(R) Dual  CPU  E2200  @ 2.20GHz (2194.55-MHz K8-class CPU)
          Origin = "GenuineIntel"  Id = 0x6fd  Family = 0x6  Model = 0xf  Stepping = 13
          Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0xe39d <sse3,dtes64,mon,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm>AMD Features=0x20000800 <syscall,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant, performance statistics
        real memory  = 4294967296 (4096 MB)
        Physical memory chunk(s):
        0x0000000000010000 - 0x0000000000099fff, 565248 bytes (138 pages)
        0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
        0x00000000024f6000 - 0x00000000b73f0fff, 3035607040 bytes (741115 pages)
        0x0000000100000000 - 0x000000013ffe7fff, 1073643520 bytes (262120 pages)
        avail memory = 4088520704 (3899 MB)
        Event timer "LAPIC" quality 400
        ACPI APIC Table: <ptltd   ="" apic ="">INTR: Adding local APIC 1 as a target
        FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
        FreeBSD/SMP: 1 package(s) x 2 core(s)
        cpu0 (BSP): APIC ID:  0
        cpu1 (AP): APIC ID:  1
        APIC: CPU 0 has ACPI ID 0
        APIC: CPU 1 has ACPI ID 1
        x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
        x86bios: SSEG 0x098000-0x098fff at 0xfffffe003f3a4000
        x86bios: EBDA 0x09d000-0x09ffff at 0xfffff8000009d000
        x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
        XEN: CPU 0 has VCPU ID 0
        XEN: CPU 1 has VCPU ID 1
        ULE: setup cpu 0
        ULE: setup cpu 1
        ACPI: RSDP 0xf7260 00014 (v00 PTLTD )
        ACPI: RSDT 0xbf683b6d 00060 (v01 PTLTD    RSDT  06040000  LTP 00000000)
        ACPI: FACP 0xbf68ad08 00084 (v01 SUPRMC          06040000 PTL  00000003)
        ACPI: DSDT 0xbf68569f 05669 (v01  INTEL BR_WATER 06040000 MSFT 03000001)
        ACPI: FACS 0xbf68bfc0 00040
        ACPI: TCPA 0xbf68ad8c 00032 (v01 SMC            06040000 PTL  00000000)
        ACPI: MCFG 0xbf68adbe 0003C (v01 PTLTD    MCFG  06040000  LTP 00000000)
        ACPI: APIC 0xbf68adfa 00068 (v01 PTLTD  ? APIC  06040000  LTP 00000000)
        ACPI: BOOT 0xbf68ae62 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
        ACPI: SLIC 0xbf68ae8a 00176 (v01 OEMID_ OEMTABLE 06040000  LTP 00000000)
        ACPI: SSDT 0xbf685440 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050228)
        ACPI: SSDT 0xbf68539a 000A6 (v01  PmRef  Cpu7Tst 00003000 INTL 20050228)
        ACPI: SSDT 0xbf6852f4 000A6 (v01  PmRef  Cpu6Tst 00003000 INTL 20050228)
        ACPI: SSDT 0xbf68524e 000A6 (v01  PmRef  Cpu5Tst 00003000 INTL 20050228)
        ACPI: SSDT 0xbf6851a8 000A6 (v01  PmRef  Cpu4Tst 00003000 INTL 20050228)
        ACPI: SSDT 0xbf685102 000A6 (v01  PmRef  Cpu3Tst 00003000 INTL 20050228)
        ACPI: SSDT 0xbf68505c 000A6 (v01  PmRef  Cpu2Tst 00003000 INTL 20050228)
        ACPI: SSDT 0xbf684fb6 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050228)
        ACPI: SSDT 0xbf683bcd 013E9 (v01  PmRef    CpuPm 00003000 INTL 20050228)
        MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
        ioapic0: Routing external 8259A's -> intpin 0
        lapic0: Routing NMI -> LINT1
        lapic0: LINT1 trigger: edge
        lapic0: LINT1 polarity: high
        lapic1: Routing NMI -> LINT1
        lapic1: LINT1 trigger: edge
        lapic1: LINT1 polarity: high
        MADT: Interrupt override: source 0, irq 2
        ioapic0: Routing IRQ 0 -> intpin 2
        MADT: Interrupt override: source 9, irq 9
        ioapic0: intpin 9 trigger: level
        ioapic0 <version 2.0="">irqs 0-23 on motherboard
        cpu0 BSP:
            ID: 0x00000000  VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
          lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
          timer: 0x000100ef therm: 0x00000200 err: 0x000000f0 pmc: 0x00010400
        firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xffffffff81a1b80c
        firmware: 'iwn5000fw' version 0: 340696 bytes loaded at 0xffffffff81a496fc
        firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xffffffff81a9ca84
        firmware: 'iwn6000fw' version 0: 454608 bytes loaded at 0xffffffff81aef12c
        firmware: 'wpifw' version 153229: 150100 bytes loaded at 0xffffffff81df6cc4
        firmware: 'iwn6000g2afw' version 0: 444128 bytes loaded at 0xffffffff81b5e1ac
        firmware: 'iwn6000g2bfw' version 0: 460912 bytes loaded at 0xffffffff81bca93c
        firmware: 'iwn6050fw' version 0: 469780 bytes loaded at 0xffffffff81c3b25c
        snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
        feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
        firmware: 't4fw_cfg' version 0: 3059 bytes loaded at 0xffffffff8164c804
        firmware: 't4fw_cfg_uwire' version 0: 21284 bytes loaded at 0xffffffff8164d3f7
        firmware: 't4fw' version 0: 512512 bytes loaded at 0xffffffff8165271b
        firmware: 't5fw_cfg' version 0: 3435 bytes loaded at 0xffffffff816cf9cc
        firmware: 't5fw' version 0: 513024 bytes loaded at 0xffffffff816d0737
        firmware: 'mw88W8363fw' version 0: 94940 bytes loaded at 0xffffffff81cb992c
        firmware: 'mwlboot' version 0: 2280 bytes loaded at 0xffffffff81cd0c08
        firmware: 'rsu-rtl8712fw' version 120: 122328 bytes loaded at 0xffffffff81dbaae4
        firmware: 'runfw' version 0: 8192 bytes loaded at 0xffffffff81dd8ca4
        firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0xffffffff81d5aff4
        wlan: mac acl policy registered
        firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0xffffffff81d5d0a4
        firmware: 'urtwn-rtl8188eufw' version 111: 13904 bytes loaded at 0xffffffff81ddb5dc
        firmware: 'urtwn-rtl8192cfwT' version 111: 16076 bytes loaded at 0xffffffff81ddecdc
        firmware: 'urtwn-rtl8192cfwU' version 111: 16076 bytes loaded at 0xffffffff81de2c54
        firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0xffffffff81d5f154
        firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0xffffffff81d61204
        firmware: 'mxge_eth_z8e' version 377284: 120629 bytes loaded at 0xffffffff81cd16c0
        wlan: <802.11 Link Layer>
        firmware: 'mxge_ethp_z8e' version 387604: 121317 bytes loaded at 0xffffffff81ceeeb0
        firmware: 'mxge_rss_eth_z8e' version 534724: 151912 bytes loaded at 0xffffffff81d0c950
        firmware: 'mxge_rss_ethp_z8e' version 544468: 152837 bytes loaded at 0xffffffff81d31b70
        ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
        ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
        module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80606640, 0) error 1
        ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
        ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
        module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806066f0, 0) error 1
        ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
        ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
        module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff806067a0, 0) error 1
        iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
        iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
        module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8062de10, 0) error 1
        iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
        iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
        module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8062dec0, 0) error 1
        iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
        iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
        module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8062df70, 0) error 1
        firmware: 'iwn1000fw' version 0: 337520 bytes loaded at 0xffffffff8187260c
        firmware: 'iwn2000fw' version 0: 695876 bytes loaded at 0xffffffff818c4d2c
        firmware: 'iwn2030fw' version 0: 707392 bytes loaded at 0xffffffff8196ec1c
        Hardware, Intel Secure Key RNG: RDRAND is not present
        Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
        null: <null device,="" zero="" device="">Falling back to <software, yarrow="">random adaptor
        random: <software, yarrow="">initialized
        nfslock: pseudo-device
        crypto: <crypto core="">VESA: INT 0x10 vector 0xc000:0x0014
        VESA: information block
        0000  56 45 53 41 00 03 00 01 00 99 01 00 00 00 40 00
        0010  00 99 77 00 00 01 38 01 00 99 4a 01 00 99 73 01
        0020  00 99 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0030  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0040  60 01 61 01 62 01 63 01 64 01 65 01 66 01 67 01
        0050  68 01 3c 01 4d 01 5c 01 3a 01 4b 01 5a 01 07 01
        0060  1a 01 1b 01 05 01 17 01 18 01 12 01 14 01 15 01
        0070  01 01 03 01 11 01 ff ff 00 00 00 00 00 00 00 00
        0080  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0090  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        00a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        00b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        00c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        00d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        00e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        00f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        0100  49 6e 74 65 6c 28 72 29 42 72 6f 61 64 77 61 74
        0110  65 72 2d 47 20 47 72 61 70 68 69 63 73 20 43 68
        0120  69 70 20 41 63 63 65 6c 65 72 61 74 65 64 20 56
        0130  47 41 20 42 49 4f 53 00 49 6e 74 65 6c 20 43 6f
        0140  72 70 6f 72 61 74 69 6f 6e 00 49 6e 74 65 6c 28
        0150  72 29 42 72 6f 61 64 77 61 74 65 72 2d 47 20 47
        0160  72 61 70 68 69 63 73 20 43 6f 6e 74 72 6f 6c 6c
        0170  65 72 00 48 61 72 64 77 61 72 65 20 56 65 72 73
        0180  69 6f 6e 20 30 2e 30 00 00 00 00 00 00 00 00 00
        0190  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        01a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        01b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        01c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        01d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        01e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        01f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        VESA: 17 mode(s) found
        VESA: v3.0, 7616k memory, flags:0x1, mode table:0xfffffe003f3fa040 (99000040)
        VESA: Intel(r)Broadwater-G Graphics Chip Accelerated VGA BIOS
        VESA: Intel Corporation Intel(r)Broadwater-G Graphics Controller Hardware Version 0.0
        io: VMBUS: load
        kbd: new array size 4
        kbd1 at kbdmux0
        mem: <memory>hpt27xx: RocketRAID 27xx controller driver v1.1
        hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
        hptnr: R750/DC7280 controller driver v1.0.1
        cryptosoft0: <software crypto="">on motherboard
        crypto: assign cryptosoft0 driver id 0, flags 100663296
        crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
        crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
        padlock0: No ACE support.
        acpi0: <ptltd  rsdt="">on motherboard
        ACPI: All ACPI Tables successfully acquired
        PCIe: Memory Mapped configuration base @ 0xe0000000
        ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
        acpi0: Power Button (fixed)
        cpu0: Processor \134_PR        .CPU0 (ACPI ID 0) -> APIC ID 0
        cpu0: <acpi cpu="">on acpi0
        cpu0: switching to generic Cx mode
        cpu1: Processor \134_PR_.CPU1 (ACPI ID 1) -> APIC ID 1
        cpu1: <acpi cpu="">on acpi0
        ACPI: Processor \134_PR_.CPU2 (ACPI ID 2) ignored
        ACPI: Processor \134_PR_.CPU3 (ACPI ID 3) ignored
        ACPI: Processor \134_PR_.CPU4 (ACPI ID 4) ignored
        ACPI: Processor \134_PR_.CPU5 (ACPI ID 5) ignored
        ACPI: Processor \134_PR_.CPU6 (ACPI ID 6) ignored
        ACPI: Processor \134_PR_.CPU7 (ACPI ID 7) ignored
        atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
        atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
        ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
        Event timer "RTC" frequency 32768 Hz quality 0
        attimer0: <at timer="">port 0x40-0x43,0x50-0x53 irq 0 on acpi0
        Timecounter "i8254" frequency 1193182 Hz quality 0
        ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 50
        Event timer "i8254" frequency 1193182 Hz quality 100
        ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
        Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
        acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
        pci_link0:        Index  IRQ  Rtd  Ref  IRQs
          Initial Probe      0  10  N    0  3 4 5 6 7 10 11 12 14 15
          Validation          0  10  N    0  3 4 5 6 7 10 11 12 14 15
          After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
        pci_link1:        Index  IRQ  Rtd  Ref  IRQs
          Initial Probe      0  11  N    0  3 4 5 6 7 10 11 12 14 15
          Validation          0  11  N    0  3 4 5 6 7 10 11 12 14 15
          After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
        pci_link2:        Index  IRQ  Rtd  Ref  IRQs
          Initial Probe      0    5  N    0  3 4 5 6 7 10 11 12 14 15
          Validation          0    5  N    0  3 4 5 6 7 10 11 12 14 15
          After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
        pci_link3:        Index  IRQ  Rtd  Ref  IRQs
          Initial Probe      0    7  N    0  3 4 5 6 7 10 11 12 14 15
          Validation          0    7  N    0  3 4 5 6 7 10 11 12 14 15
          After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
        pci_link4:        Index  IRQ  Rtd  Ref  IRQs
          Initial Probe      0  255  N    0  3 4 5 6 7 10 11 12 14 15
          Validation          0  255  N    0  3 4 5 6 7 10 11 12 14 15
          After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
        pci_link5:        Index  IRQ  Rtd  Ref  IRQs
          Initial Probe      0  255  N    0  3 4 5 6 7 10 11 12 14 15
          Validation          0  255  N    0  3 4 5 6 7 10 11 12 14 15
          After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
        pci_link6:        Index  IRQ  Rtd  Ref  IRQs
          Initial Probe      0  255  N    0  3 4 5 6 7 10 11 12 14 15
          Validation          0  255  N    0  3 4 5 6 7 10 11 12 14 15
          After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
        pci_link7:        Index  IRQ  Rtd  Ref  IRQs
          Initial Probe      0  255  N    0  3 4 5 6 7 10 11 12 14 15
          Validation          0  255  N    0  3 4 5 6 7 10 11 12 14 15
          After Disable      0  255  N    0  3 4 5 6 7 10 11 12 14 15
        pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
        pcib0: decoding 4 range 0-0xcf7
        pcib0: decoding 3 range 0xa0000-0xbffff
        pcib0: decoding 3 range 0xd0000-0xd3fff
        pcib0: decoding 3 range 0xd4000-0xd7fff
        pcib0: decoding 3 range 0xd8000-0xdbfff
        pcib0: decoding 3 range 0xdc000-0xdffff
        pcib0: decoding 3 range 0xe0000-0xe3fff
        pcib0: decoding 3 range 0xc0000000-0xdfffffff
        pcib0: decoding 4 range 0xd00-0xfdff
        pcib0: decoding 3 range 0xfed40000-0xfed44fff
        pci0: <acpi pci="" bus="">on pcib0
        pci0: domain=0, physical bus=0
        found-> vendor=0x8086, dev=0x2970, revid=0x02
                domain=0, bus=0, slot=0, func=0
                class=06-00-00, hdrtype=0x00, mfdev=0
                cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        found-> vendor=0x8086, dev=0x2972, revid=0x02
                domain=0, bus=0, slot=2, func=0
                class=03-00-00, hdrtype=0x00, mfdev=0
                cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
                intpin=a, irq=10
                powerspec 2  supports D0 D3  current D0
                MSI supports 1 message
                map[10]: type Memory, range 32, base 0xd0000000, size 20, enabled
        pcib0: allocated type 3 (0xd0000000-0xd00fffff) for rid 10 of pci0:0:2:0
                map[18]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
        pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 18 of pci0:0:2:0
                map[20]: type I/O Port, range 32, base 0x30b0, size  3, enabled
        pcib0: allocated type 4 (0x30b0-0x30b7) for rid 20 of pci0:0:2:0
        pcib0: matched entry for 0.2.INTA
        pcib0: slot 2 INTA hardwired to IRQ 16
        found-> vendor=0x8086, dev=0x27d0, revid=0x01
                domain=0, bus=0, slot=28, func=0
                class=06-04-00, hdrtype=0x01, mfdev=1
                cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
                intpin=a, irq=10
                powerspec 2  supports D0 D3  current D0
                MSI supports 1 message
        pcib0: matched entry for 0.28.INTA
        pcib0: slot 28 INTA hardwired to IRQ 16
        found-> vendor=0x8086, dev=0x27e0, revid=0x01
                domain=0, bus=0, slot=28, func=4
                class=06-04-00, hdrtype=0x01, mfdev=1
                cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
                intpin=a, irq=10
                powerspec 2  supports D0 D3  current D0
                MSI supports 1 message
        pcib0: matched entry for 0.28.INTA
        pcib0: slot 28 INTA hardwired to IRQ 16
        found-> vendor=0x8086, dev=0x27e2, revid=0x01
                domain=0, bus=0, slot=28, func=5
                class=06-04-00, hdrtype=0x01, mfdev=1
                cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
                intpin=b, irq=11
                powerspec 2  supports D0 D3  current D0
                MSI supports 1 message
        pcib0: matched entry for 0.28.INTB
        pcib0: slot 28 INTB hardwired to IRQ 17
        found-> vendor=0x8086, dev=0x27c8, revid=0x01
                domain=0, bus=0, slot=29, func=0
                class=0c-03-00, hdrtype=0x00, mfdev=1
                cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
                intpin=a, irq=10
                map[20]: type I/O Port, range 32, base 0x3000, size  5, enabled
        pcib0: allocated type 4 (0x3000-0x301f) for rid 20 of pci0:0:29:0
        pcib0: matched entry for 0.29.INTA
        pcib0: slot 29 INTA hardwired to IRQ 16
        found-> vendor=0x8086, dev=0x27c9, revid=0x01
                domain=0, bus=0, slot=29, func=1
                class=0c-03-00, hdrtype=0x00, mfdev=0
                cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
                intpin=b, irq=11
                map[20]: type I/O Port, range 32, base 0x3020, size  5, enabled
        pcib0: allocated type 4 (0x3020-0x303f) for rid 20 of pci0:0:29:1
        pcib0: matched entry for 0.29.INTB
        pcib0: slot 29 INTB hardwired to IRQ 17
        found-> vendor=0x8086, dev=0x27ca, revid=0x01
                domain=0, bus=0, slot=29, func=2
                class=0c-03-00, hdrtype=0x00, mfdev=0
                cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
                intpin=c, irq=5
                map[20]: type I/O Port, range 32, base 0x3040, size  5, enabled
        pcib0: allocated type 4 (0x3040-0x305f) for rid 20 of pci0:0:29:2
        pcib0: matched entry for 0.29.INTC
        pcib0: slot 29 INTC hardwired to IRQ 18
        found-> vendor=0x8086, dev=0x27cb, revid=0x01
                domain=0, bus=0, slot=29, func=3
                class=0c-03-00, hdrtype=0x00, mfdev=0
                cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
                intpin=d, irq=7
                map[20]: type I/O Port, range 32, base 0x3060, size  5, enabled
        pcib0: allocated type 4 (0x3060-0x307f) for rid 20 of pci0:0:29:3
        pcib0: matched entry for 0.29.INTD
        pcib0: slot 29 INTD hardwired to IRQ 19
        found-> vendor=0x8086, dev=0x27cc, revid=0x01
                domain=0, bus=0, slot=29, func=7
                class=0c-03-20, hdrtype=0x00, mfdev=0
                cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
                intpin=a, irq=10
                powerspec 2  supports D0 D3  current D0
                map[10]: type Memory, range 32, base 0xd0500000, size 10, enabled
        pcib0: allocated type 3 (0xd0500000-0xd05003ff) for rid 10 of pci0:0:29:7
        pcib0: matched entry for 0.29.INTA
        pcib0: slot 29 INTA hardwired to IRQ 16
        found-> vendor=0x8086, dev=0x244e, revid=0xe1
                domain=0, bus=0, slot=30, func=0
                class=06-04-01, hdrtype=0x01, mfdev=0
                cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
        found-> vendor=0x8086, dev=0x27b8, revid=0x01
                domain=0, bus=0, slot=31, func=0
                class=06-01-00, hdrtype=0x00, mfdev=1
                cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        found-> vendor=0x8086, dev=0x27c1, revid=0x01
                domain=0, bus=0, slot=31, func=2
                class=01-06-01, hdrtype=0x00, mfdev=0
                cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
                intpin=b, irq=11
                powerspec 2  supports D0 D3  current D0
                MSI supports 1 message
                map[10]: type I/O Port, range 32, base 0x30c8, size  3, enabled
        pcib0: allocated type 4 (0x30c8-0x30cf) for rid 10 of pci0:0:31:2
                map[14]: type I/O Port, range 32, base 0x30bc, size  2, enabled
        pcib0: allocated type 4 (0x30bc-0x30bf) for rid 14 of pci0:0:31:2
                map[18]: type I/O Port, range 32, base 0x30c0, size  3, enabled
        pcib0: allocated type 4 (0x30c0-0x30c7) for rid 18 of pci0:0:31:2
                map[1c]: type I/O Port, range 32, base 0x30b8, size  2, enabled
        pcib0: allocated type 4 (0x30b8-0x30bb) for rid 1c of pci0:0:31:2
                map[20]: type I/O Port, range 32, base 0x30a0, size  4, enabled
        pcib0: allocated type 4 (0x30a0-0x30af) for rid 20 of pci0:0:31:2
                map[24]: type Memory, range 32, base 0xd0500400, size 10, enabled
        pcib0: allocated type 3 (0xd0500400-0xd05007ff) for rid 24 of pci0:0:31:2
        pcib0: matched entry for 0.31.INTB
        pcib0: slot 31 INTB hardwired to IRQ 17
        found-> vendor=0x8086, dev=0x27da, revid=0x01
                domain=0, bus=0, slot=31, func=3
                class=0c-05-00, hdrtype=0x00, mfdev=0
                cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
                intpin=b, irq=11
                map[20]: type I/O Port, range 32, base 0x1100, size  5, enabled
        pcib0: allocated type 4 (0x1100-0x111f) for rid 20 of pci0:0:31:3
        pcib0: matched entry for 0.31.INTB
        pcib0: slot 31 INTB hardwired to IRQ 17
        vgapci0: <vga-compatible display="">port 0x30b0-0x30b7 mem 0xd0000000-0xd00fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
        agp0: <intel 946gz="" svga="" controller="">on vgapci0
        pcib0: allocated type 3 (0xd0100000-0xd0100fff) for rid 64 of agp0
        agp0: Allocated flush page phys 0xd0100000 virt 0xfffff800d0100000
        agp0: aperture size is 256M, detected 7676k stolen memory
        agp0: AGP_I965_PGTBL_CTL2: 00000000
        agp0: AGP_I855_GCC1: 0x30
        agp0: AGP_I965_MSAC: 0x00
        agp0: Mappable GTT entries: 65536
        agp0: Total GTT entries: 131072
        vgapci0: Boot video device
        pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
        pcib1:  domain            0
        pcib1:  secondary bus    1
        pcib1:  subordinate bus  1
        pci1: <acpi pci="" bus="">on pcib1
        pci1: domain=0, physical bus=1
        pcib2: <acpi pci-pci="" bridge="">irq 16 at device 28.4 on pci0
        pcib2: allocating non-ISA range 0x4000-0x40ff
        pcib0: allocated type 4 (0x4000-0x40ff) for rid 1c of pcib2
        pcib2: allocating non-ISA range 0x4400-0x44ff
        pcib0: allocated type 4 (0x4400-0x44ff) for rid 1c of pcib2
        pcib2: allocating non-ISA range 0x4800-0x48ff
        pcib0: allocated type 4 (0x4800-0x48ff) for rid 1c of pcib2
        pcib2: allocating non-ISA range 0x4c00-0x4cff
        pcib0: allocated type 4 (0x4c00-0x4cff) for rid 1c of pcib2
        pcib2: failed to allocate initial memory window: 0xd0100000-0xd01fffff
        pcib2:  domain            0
        pcib2:  secondary bus    2
        pcib2:  subordinate bus  2
        pcib2:  I/O decode        0x4000-0x4fff
        pcib2:  special decode    ISA
        pci2: <acpi pci="" bus="">on pcib2
        pci2: domain=0, physical bus=2
        found-> vendor=0x8086, dev=0x109a, revid=0x00
                domain=0, bus=2, slot=0, func=0
                class=02-00-00, hdrtype=0x00, mfdev=0
                cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
                intpin=a, irq=10
                powerspec 2  supports D0 D3  current D0
                MSI supports 1 message, 64 bit
                map[10]: type Memory, range 32, base 0xd0100000, size 17, enabled
        pcib2: failed to allocate initial memory window (0xd0100000-0xd011ffff,0x20000)
        pci2: pci0:2:0:0 bar 0x10 failed to allocate
                map[18]: type I/O Port, range 32, base 0x4000, size  5, enabled
        pcib2: allocated I/O port range (0x4000-0x401f) for rid 18 of pci0:2:0:0
        pcib2: matched entry for 2.0.INTA
        pcib2: slot 0 INTA hardwired to IRQ 16
        em0: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0x4000-0x401f irq 16 at device 0.0 on pci2
        pcib0: allocated type 3 (0xd0200000-0xd02fffff) for rid 20 of pcib2
        pcib2: allocated initial memory window of 0xd0200000-0xd02fffff
        pcib2: allocated memory range (0xd0200000-0xd021ffff) for rid 10 of em0
        em0: Lazy allocation of 0x20000 bytes rid 0x10 type 3 at 0xd0200000
        em0: attempting to allocate 1 MSI vectors (1 supported)
        msi: routing MSI IRQ 256 to local APIC 0 vector 51
        em0: using IRQ 256 for MSI
        em0: Using an MSI interrupt
        em0: Setup of Shared code failed
        device_attach: em0 attach returned 6
        pcib3: <acpi pci-pci="" bridge="">irq 17 at device 28.5 on pci0
        pcib3: allocating non-ISA range 0x5000-0x50ff
        pcib0: allocated type 4 (0x5000-0x50ff) for rid 1c of pcib3
        pcib3: allocating non-ISA range 0x5400-0x54ff
        pcib0: allocated type 4 (0x5400-0x54ff) for rid 1c of pcib3
        pcib3: allocating non-ISA range 0x5800-0x58ff
        pcib0: allocated type 4 (0x5800-0x58ff) for rid 1c of pcib3
        pcib3: allocating non-ISA range 0x5c00-0x5cff
        pcib0: allocated type 4 (0x5c00-0x5cff) for rid 1c of pcib3
        pcib3: failed to allocate initial memory window: 0xd0200000-0xd02fffff
        pcib3:  domain            0
        pcib3:  secondary bus    3
        pcib3:  subordinate bus  3
        pcib3:  I/O decode        0x5000-0x5fff
        pcib3:  special decode    ISA
        pci3: <acpi pci="" bus="">on pcib3
        pci3: domain=0, physical bus=3
        found-> vendor=0x8086, dev=0x109a, revid=0x00
                domain=0, bus=3, slot=0, func=0
                class=02-00-00, hdrtype=0x00, mfdev=0
                cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
                lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
                intpin=a, irq=11
                powerspec 2  supports D0 D3  current D0
                MSI supports 1 message, 64 bit
                map[10]: type Memory, range 32, base 0xd0200000, size 17, enabled
        pcib3: failed to allocate initial memory window (0xd0200000-0xd021ffff,0x20000)
        pci3: pci0:3:0:0 bar 0x10 failed to allocate
                map[18]: type I/O Port, range 32, base 0x5000, size  5, enabled
        pcib3: allocated I/O port range (0x5000-0x501f) for rid 18 of pci0:3:0:0
        pcib3: matched entry for 3.0.INTA
        pcib3: slot 0 INTA hardwired to IRQ 17
        em0: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0x5000-0x501f irq 17 at device 0.0 on pci3
        pcib0: allocated type 3 (0xd0300000-0xd03fffff) for rid 20 of pcib3
        pcib3: allocated initial memory window of 0xd0300000-0xd03fffff
        pcib3: allocated memory range (0xd0300000-0xd031ffff) for rid 10 of em0
        em0: Lazy allocation of 0x20000 bytes rid 0x10 type 3 at 0xd0300000
        em0: attempting to allocate 1 MSI vectors (1 supported)
        msi: routing MSI IRQ 256 to local APIC 0 vector 51
        em0: using IRQ 256 for MSI
        em0: Using an MSI interrupt
        em0: bpf attached
        uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0x3000-0x301f irq 16 at device 29.0 on pci0
        ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52
        usbus0 on uhci0
        uhci0: usbpf: Attached
        uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0x3020-0x303f irq 17 at device 29.1 on pci0
        ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 53
        usbus1 on uhci1
        uhci1: usbpf: Attached
        uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0x3040-0x305f irq 18 at device 29.2 on pci0
        ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54
        usbus2 on uhci2
        uhci2: usbpf: Attached
        uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0x3060-0x307f irq 19 at device 29.3 on pci0
        ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 55
        usbus3 on uhci3
        uhci3: usbpf: Attached
        ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xd0500000-0xd05003ff irq 16 at device 29.7 on pci0
        usbus4: EHCI version 1.0
        usbus4 on ehci0
        ehci0: usbpf: Attached
        pcib4: <acpi pci-pci="" bridge="">at device 30.0 on pci0
        pcib4:  domain            0
        pcib4:  secondary bus    4
        pcib4:  subordinate bus  4
        pcib4:  special decode    ISA, subtractive
        pci4: <acpi pci="" bus="">on pcib4
        pci4: domain=0, physical bus=4
        isab0: <pci-isa bridge="">at device 31.0 on pci0
        isa0: <isa bus="">on isab0
        ahci0: <intel ich7="" ahci="" sata="" controller="">port 0x30c8-0x30cf,0x30bc-0x30bf,0x30c0-0x30c7,0x30b8-0x30bb,0x30a0-0x30af mem 0xd0500400-0xd05007ff irq 17 at device 31.2 on pci0
        ahci0: attempting to allocate 1 MSI vectors (1 supported)
        msi: routing MSI IRQ 257 to local APIC 0 vector 56
        ahci0: using IRQ 257 for MSI
        ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
        ahci0: Caps: 64bit NCQ ALP AL CLO 3Gbps PMD SSC PSC 32cmd 4ports
        ahcich0: <ahci channel="">at channel 0 on ahci0
        ahcich0: Caps: HPCP
        ahcich1: <ahci channel="">at channel 1 on ahci0
        ahcich1: Caps: HPCP
        ahcich2: <ahci channel="">at channel 2 on ahci0
        ahcich2: Caps: HPCP
        ahcich3: <ahci channel="">at channel 3 on ahci0
        ahcich3: Caps: HPCP
        pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
        acpi_button0: <power button="">on acpi0
        atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
        atkbd0: <at keyboard="">irq 1 on atkbdc0
        atkbd: the current kbd controller command byte 0067
        atkbd: keyboard ID 0xffffffff (1)
        atkbd: failed to reset the keyboard.
        kbd0 at atkbd0
        kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
        ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57
        atkbd0: [GIANT-LOCKED]
        psm0: unable to allocate IRQ
        psmcpnp0: <ps 2="" mouse="" port="">irq 12 on acpi0
        psm0: current command byte:0067
        psm0: failed to reset the aux device.
        fdc0: <floppy drive="" controller="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
        fdc0: ic_type 90 part_id 80
        ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 58
        acpi0: wakeup code va 0xfffffe0045d8c000 pa 0x94000
        ahc_isa_identify 0: ioport 0xc00 alloc failed
        ahc_isa_identify 1: ioport 0x1c00 alloc failed
        ahc_isa_identify 2: ioport 0x2c00 alloc failed
        ahc_isa_identify 3: ioport 0x3c00 alloc failed
        ahc_isa_identify 4: ioport 0x4c00 alloc failed
        ahc_isa_identify 5: ioport 0x5c00 alloc failed
        ahc_isa_identify 6: ioport 0x6c00 alloc failed
        ahc_isa_identify 7: ioport 0x7c00 alloc failed
        ahc_isa_identify 8: ioport 0x8c00 alloc failed
        ahc_isa_identify 9: ioport 0x9c00 alloc failed
        ahc_isa_identify 10: ioport 0xac00 alloc failed
        ahc_isa_identify 11: ioport 0xbc00 alloc failed
        ahc_isa_identify 12: ioport 0xcc00 alloc failed
        ahc_isa_identify 13: ioport 0xdc00 alloc failed
        ahc_isa_identify 14: ioport 0xec00 alloc failed
        ex_isa_identify()
        pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
        pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
        pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
        pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
        pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
        pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
        pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
        pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
        pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xda000-0xda7ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xda800-0xdafff) for rid 2 of orm0
        pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 2 of orm0
        pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 2 of orm0
        pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xdd800-0xddfff) for rid 2 of orm0
        pcib0: allocated type 3 (0xde000-0xde7ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xde800-0xdefff) for rid 2 of orm0
        pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xdf800-0xdffff) for rid 2 of orm0
        pcib0: allocated type 3 (0xe0000-0xe07ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xe0800-0xe0fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xe1000-0xe17ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xe1800-0xe1fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xe2000-0xe27ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xe2800-0xe2fff) for rid 2 of orm0
        pcib0: allocated type 3 (0xe3000-0xe37ff) for rid 2 of orm0
        pcib0: allocated type 3 (0xe3800-0xe3fff) for rid 2 of orm0
        isa_probe_children: disabling PnP devices
        atkbdc: atkbdc0 already exists; skipping it
        atrtc: atrtc0 already exists; skipping it
        attimer: attimer0 already exists; skipping it
        fdc: fdc0 already exists; skipping it
        sc: sc0 already exists; skipping it
        isa_probe_children: probing non-PnP devices
        orm0: <isa option="" roms="">at iomem 0xc0000-0xcafff,0xcb000-0xcbfff on isa0
        sc0: <system console="">at flags 0x100 on isa0
        sc0: VGA <16 virtual consoles, flags=0x300>
        sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
        vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
        pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
        pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
        ppc0: cannot reserve I/O port range
        ppc0 failed to probe at irq 7 on isa0
        pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
        uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0
        pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
        uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
        wbwd0 failed to probe on isa0
        isa_probe_children: probing PnP devices
        est0: enabling SpeedStep
        est0: <enhanced speedstep="" frequency="" control="">on cpu0
        est: CPU supports Enhanced Speedstep, but is not recognized.
        est: cpu_vendor GenuineIntel, msr b200b2006000b20
        device_attach: est0 attach returned 6
        p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
        est1: <enhanced speedstep="" frequency="" control="">on cpu1
        est: CPU supports Enhanced Speedstep, but is not recognized.
        est: cpu_vendor GenuineIntel, msr b200b2006000b20
        device_attach: est1 attach returned 6
        p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
        Device configuration finished.
        procfs registered
        lapic: Divisor 2, Frequency 99752152 Hz
        Timecounters tick every 1.000 msec
        pflog0: bpf attached
        crypto: <crypto device="">vlan: initialized, using hash tables with chaining
        tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768
        IPsec: Initialized Security Association Processing.
        pfsync0: bpf attached
        lo0: bpf attached
        enc0: bpf attached
        hpt27xx: no controller detected.
        hptrr: no controller detected.
        hptnr: no controller detected.
        random: unblocking device.
        usbus0: 12Mbps Full Speed USB v1.0
        usbus1: 12Mbps Full Speed USB v1.0
        usbus2: 12Mbps Full Speed USB v1.0
        usbus3: 12Mbps Full Speed USB v1.0
        usbus4: 480Mbps High Speed USB v2.0
        ahcich0: AHCI reset…
        ahcich0: SATA connect time=900us status=00000113
        ahcich0: AHCI reset: device found
        ahcich1: AHCI reset...
        ahcich1: SATA offline status=00000004
        ahcich1: AHCI reset: device not found
        ahcich2: AHCI reset...
        ugen1.1: <intel>at usbus1
        uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
        ugen0.1: <intel>at usbus0
        uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
        ugen3.1: <intel>at usbus3
        uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
        ugen2.1: <intel>at usbus2
        uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
        ugen4.1: <intel>at usbus4
        uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
        ahcich2: SATA connect time=900us status=00000113
        ahcich2: AHCI reset: device found
        ahcich2: AHCI reset: device ready after 0ms
        ahcich3: AHCI reset...
        ahcich3: SATA offline status=00000004
        ahcich3: AHCI reset: device not found
        ahcich0: AHCI reset: device ready after 100ms
        pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
        GEOM: new disk cd0
        cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
        cd0: <tsstcorp cddvdw="" ts-h653n="" 0208="">Removable CD-ROM SCSI-0 device
        cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
        cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
        pass0: <st3250310as 3.aaf="">ATA-7 SATA 1.x device
        pass0: Serial Number 6RYAJH0Y
        pass0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
        pass0: Command Queueing enabled
        pass1 at ahcich2 bus 0 scbus2 target 0 lun 0
        pass1: <tsstcorp cddvdw="" ts-h653n="" 0208="">Removable CD-ROM SCSI-0 device
        pass1: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
        ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
        ada0: <st3250310as 3.aaf="">ATA-7 SATA 1.x device
        ada0: Serial Number 6RYAJH0Y
        ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
        ada0: Command Queueing enabled
        ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
        ada0: Previously was known as ad4
        GEOM: new disk ada0
        Netvsc initializing... done!
        SMP: AP CPU #1 Launched!
        cpu1 AP:
            ID: 0x01000000  VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
          lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
          timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
        ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
        ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 49
        ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50
        ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51
        msi: Assigning MSI IRQ 257 to local APIC 1 vector 52
        SMP: passed TSC synchronization test
        TSC timecounter discards lower 1 bit(s)
        Timecounter "TSC-low" frequency 1097273336 Hz quality 1000
        Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
        uhub0: 2 ports with 2 removable, self powered
        uhub1: 2 ports with 2 removable, self powered
        uhub2: 2 ports with 2 removable, self powered
        uhub3: 2 ports with 2 removable, self powered
        Root mount waiting for: usbus4
        Root mount waiting for: usbus4
        uhub4: 8 ports with 8 removable, self powered
        Root mount waiting for: usbus4
        Trying to mount root from ufs:/dev/ada0s1a [rw]…
        start_init: trying /sbin/init
        ugen0.2: <microsoft>at usbus0
        ukbd0: <microsoft 0="" 2="" natural="" ergonomic="" keyboard="" 4000,="" class="" 0,="" rev="" 2.00="" 1.73,="" addr="">on usbus0
        kbd2 at ukbd0
        kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
        uhid0: <microsoft 0="" 2="" natural="" ergonomic="" keyboard="" 4000,="" class="" 0,="" rev="" 2.00="" 1.73,="" addr="">on usbus0
        ugen3.2: <crystalfontz america="">at usbus3
        umodem0: <crystalfontz 2="" america="" cfa-735="" display,="" class="" 0,="" rev="" 2.00="" 2.00,="" addr="">on usbus3
        umodem0: data interface 1, has no CM over data, has no break
        em0: Link is up 1000 Mbps Full Duplex
        ugen4.2: <vendor 0x0409="">at usbus4
        uhub5: <vendor 2="" 9="" 0x0409="" product="" 0x005a,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
        uhub5: 4 ports with 4 removable, self powered
        ugen4.3: <vendor 0x0b95="">at usbus4
        axe0: <vendor 3="" 0x0b95="" product="" 0x7720,="" rev="" 2.00="" 0.01,="" addr="">on usbus4
        axe0: PHYADDR 0xe0:0x10
        miibus0: <mii bus="">on axe0
        ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 16 on miibus0
        ukphy0: OUI 0x007063, model 0x0001, rev. 1
        ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
        ue0: <usb ethernet="">on axe0
        ue0: bpf attached
        coretemp0: <cpu on-die="" thermal="" sensors="">on cpu0
        coretemp0: Setting TjMax=85
        est0: <enhanced speedstep="" frequency="" control="">on cpu0
        est: CPU supports Enhanced Speedstep, but is not recognized.
        est: cpu_vendor GenuineIntel, msr b200b2006000b20
        device_attach: est0 attach returned 6
        coretemp1: <cpu on-die="" thermal="" sensors="">on cpu1
        coretemp1: Setting TjMax=85
        est1: <enhanced speedstep="" frequency="" control="">on cpu1
        est: CPU supports Enhanced Speedstep, but is not recognized.
        est: cpu_vendor GenuineIntel, msr b200b2006000b20
        device_attach: est1 attach returned 6
        em0: Link is Down
        em0: Link is up 1000 Mbps Full Duplex
        em0: link state changed to UP
        pflog0: promiscuous mode enabled
        em0: promiscuous mode enabled
        ue0: promiscuous mode enabled
        [2.2-RC]</enhanced></cpu></enhanced></cpu></usb></generic></mii></vendor></vendor></vendor></vendor></crystalfontz></crystalfontz></microsoft></microsoft></microsoft></st3250310as></tsstcorp></st3250310as></tsstcorp></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></crypto></cpu></enhanced></cpu></enhanced></generic></system></isa></floppy></ps></at></keyboard></power></serial></ahci></ahci></ahci></ahci></intel></isa></pci-isa></acpi></acpi></intel></intel></intel></intel></intel></intel(r)></acpi></acpi></intel(r)></acpi></acpi></acpi></acpi></intel></vga-compatible></acpi></acpi></at></at></acpi></acpi></ptltd ></software></memory>_</crypto></software,></software,></null></version></ptltd ></lahf></syscall,lm></sse3,dtes64,mon,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

        Dell 2950 g3 server
        Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
        Current: 2000 MHz, Max: 2667 MHz
        8 CPUs: 2 package(s) x 4 core(s)
        8152 MiB and 600meg 10k drive
        Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          You won't see em5 because you only have two em interfaces. The box I was using for a test has 6 em NICs. em5 wasn't being used so I ran the test on it in case it broke the interface for whatever reason.
          I don't see the rom dump output from your onboard NICs?

          In your first verbose boot log both em NICs are recognised and attached. Did you do anything other than boot verbose?

          There's  nothing obvious to help diagnose this though.

          Steve

          1 Reply Last reply Reply Quote 0
          • T
            Topper727
            last edited by

            I did those commands for rom dump and it did same result you seen after you entered it.. Although I used only em0 and em1.  I looked in system log in UI and nothing and then dmesg and seen nothing either.  I am not sure where it put the dump at

            Dell 2950 g3 server
            Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
            Current: 2000 MHz, Max: 2667 MHz
            8 CPUs: 2 package(s) x 4 core(s)
            8152 MiB and 600meg 10k drive
            Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              The actual dumped data appears in the system log. You can access that from the webgui or using 'dmesg' at the command line.

              Steve

              1 Reply Last reply Reply Quote 0
              • T
                Topper727
                last edited by

                Well I tried again and noticed when using ssh and doing sysctl dev.em.0.nvm=1 I had something appear on my monitor that is on the pfsense firewall.  Here is what i seen.. see picture

                ![2014-12-15 20.50.11.jpg](/public/imported_attachments/1/2014-12-15 20.50.11.jpg)
                ![2014-12-15 20.50.11.jpg_thumb](/public/imported_attachments/1/2014-12-15 20.50.11.jpg_thumb)

                Dell 2950 g3 server
                Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                Current: 2000 MHz, Max: 2667 MHz
                8 CPUs: 2 package(s) x 4 core(s)
                8152 MiB and 600meg 10k drive
                Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  Hmm, curious. I see that if I do 'sysctl dev.em.0.debug=1'.

                  Steve

                  1 Reply Last reply Reply Quote 0
                  • T
                    Topper727
                    last edited by

                    So where is the log you mentioned.. I seen nothing in UI https://192.168.1.1/diag_logs.php

                    And nothing in Dmesg which I posted those also.. Did a search just to make sure I didn't miss it after I scanned both of them for it first time.

                    Dell 2950 g3 server
                    Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                    Current: 2000 MHz, Max: 2667 MHz
                    8 CPUs: 2 package(s) x 4 core(s)
                    8152 MiB and 600meg 10k drive
                    Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                    1 Reply Last reply Reply Quote 0
                    • T
                      Topper727
                      last edited by

                      So if I setup SSH anyone think maybe they see something I missed?

                      Dell 2950 g3 server
                      Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                      Current: 2000 MHz, Max: 2667 MHz
                      8 CPUs: 2 package(s) x 4 core(s)
                      8152 MiB and 600meg 10k drive
                      Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Hmm, this is very odd. Seems hard to believe that sysctl command doesn't show anything on the system log when it is referred to specifically for your NIC.  :-
                        Try doing it at the console not via SSH. If I do that at the (serial in my case) console I get:

                        [2.2-RC][root@xtm5.localdomain]/root: sysctl dev.em.0.nvm=1
dev.em.0.nvm:
Interface EEPROM Dump:
Offset
0x0000  9000 877f 75dc 0420 f746 1090 ffff ffff
0x0010  ffff ffff 026b 0000 8086 10d3 ffff 8758
0x0020  0000 2001 7e74 ffff 1000 00c8 0000 2704
0x0030  6cc9 3150 073e 460b 2d84 0140 f000 0706
-1 -> -1

                        What do you make of the fact that your initial verbose log shows both em NICs successfully attached after boot? Were they both usable at that point?
                        @Topper727:

                        em1: Link is up 1000 Mbps Full Duplex
                        em1: link state changed to UP
                        pflog0: promiscuous mode enabled
                        em0: Link is up 1000 Mbps Full Duplex
                        em0: link state changed to UP
                        em1: promiscuous mode enabled
                        em0: promiscuous mode enabled
                        [2.2-RC]

                        Steve

                        1 Reply Last reply Reply Quote 0
                        • T
                          Topper727
                          last edited by

                          Will try that soon as I can from console.  The em0 and em1 you seen working was from the PCI card dual port intel card I have.  with older chip on it. the newer chip built on motherboard is one that will not work and stop PCI cards from working if they enabled.

                          Dell 2950 g3 server
                          Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                          Current: 2000 MHz, Max: 2667 MHz
                          8 CPUs: 2 package(s) x 4 core(s)
                          8152 MiB and 600meg 10k drive
                          Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Ah, OK. So in the first boot you have disabled both on-board Intel NICs in the BIOS. The second log you don't have additional dual NIC in place.

                            Neither of those two NIC types are able to dump their ROM? It's probably not the cause of your problem though even if the NICs do turn out to have a bad ROM.

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • T
                              Topper727
                              last edited by

                              Yes you got it.  When dual nic show it is the card with onboard off.  the same driver cause just an older chip that runs that pci card for dual ports.  just  a few versions newer the onboard 2 built in is one that fails and causes any PCI card to fail if those are enabled.. The dump I have not done on local machine yet only through ssh.  I will hook back up the monitor and keyboard to do this.  I only had 1 key keyboard so I use it for main machine and move there only when need.  So Monday if not sooner I will try this when I have more time.

                              Dell 2950 g3 server
                              Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                              Current: 2000 MHz, Max: 2667 MHz
                              8 CPUs: 2 package(s) x 4 core(s)
                              8152 MiB and 600meg 10k drive
                              Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                              1 Reply Last reply Reply Quote 0
                              • T
                                Topper727
                                last edited by

                                Ok here is my dump.. If right at the machine itself in my case USB keyboard and VGA monitor I can get the dump.. But since not able to copy paste like you with the Serial port setup.  Please see picture

                                This is with both built on Lan turned on but only one works

                                The value is set correctly at least on port that is working .. I can not get status of other one.. But I can make either one work but only one at time.

                                Value DF I think it said. which bit 1 is set correctly.. AM I right?

                                ![2014-12-30 23.12.15.jpg](/public/imported_attachments/1/2014-12-30 23.12.15.jpg)
                                ![2014-12-30 23.12.15.jpg_thumb](/public/imported_attachments/1/2014-12-30 23.12.15.jpg_thumb)

                                Dell 2950 g3 server
                                Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                                Current: 2000 MHz, Max: 2667 MHz
                                8 CPUs: 2 package(s) x 4 core(s)
                                8152 MiB and 600meg 10k drive
                                Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                                1 Reply Last reply Reply Quote 0
                                • stephenw10S
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  Indeed that looks like the correct, so it's not that.  :( But at least that's one thing eliminated.  :)

                                  Really hard to know what the exact cause of this is at this point. I would have to guess that it's some ACPI interaction that was introduced by the upgrade from FreeBSD 8.3 to 10.1. Assuming that I would try using the various ACPI debug options decsribed here: https://www.freebsd.org/cgi/man.cgi?query=acpi&sektion=4
                                  That is likely to be a long and tedious process that may not in the end actually produce any useful results.  :-\

                                  Steve

                                  1 Reply Last reply Reply Quote 0
                                  • T
                                    Topper727
                                    last edited by

                                    I wish some how some way it would start working.

                                    Dell 2950 g3 server
                                    Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                                    Current: 2000 MHz, Max: 2667 MHz
                                    8 CPUs: 2 package(s) x 4 core(s)
                                    8152 MiB and 600meg 10k drive
                                    Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      This is not a specific pfSense problem. You may have more luck asking for help on the FreeBSD forums. Perhaps someone there has worked around this issue before.

                                      Steve

                                      1 Reply Last reply Reply Quote 0
                                      • T
                                        Topper727
                                        last edited by

                                        Yes, I found it was since I tried freebsd 10.1 but I did post in forum and nothing back yet.. seems they not as active as pfsense is.. glad you are.  I wish I knew way to resinstall drivers

                                        Dell 2950 g3 server
                                        Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                                        Current: 2000 MHz, Max: 2667 MHz
                                        8 CPUs: 2 package(s) x 4 core(s)
                                        8152 MiB and 600meg 10k drive
                                        Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                                        1 Reply Last reply Reply Quote 0
                                        • T
                                          Topper727
                                          last edited by

                                          https://svnweb.freebsd.org/base?view=revision&revision=269196

                                          This is where they updated the EM driver .. talks about shared code in the update.. Also submitted a bug

                                          https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=196501

                                          Now the question is.  If they fix it in freebsd10.1 will it get into Pfsense and how fast?

                                          Is there a way to downgrade to the driver used in 8.1 till they fix maybe?

                                          I got the older driver but MAKE and PKG_Add are not part of pfense.. PKG_add use to be.. really starting to hate PFSENSE

                                          http://doc.pfsense.org/index.php/Add_Packages_HOWTO_Add_Packages_from_a_shell

                                          Dell 2950 g3 server
                                          Intel(R) Xeon(R) CPU E5430 @ 2.66GHz
                                          Current: 2000 MHz, Max: 2667 MHz
                                          8 CPUs: 2 package(s) x 4 core(s)
                                          8152 MiB and 600meg 10k drive
                                          Pfsense 2.4 .. Hoping to get the phpvirtualbox going again.

                                          1 Reply Last reply Reply Quote 0
                                          • stephenw10S
                                            stephenw10 Netgate Administrator
                                            last edited by

                                            Drivers are not FreeBSD packages that you can add.
                                            There are no build tools at all in pfSense, including them would only be a security risk.
                                            FreeBSD 10 moved to the pkgng package system.
                                            The driver subsystems changed a lot between 8.3 and 10.1, i'd be surprised if you're able to compile an 8.3 driver against 10.1 source.
                                            It's my belief that it's not the driver anyway but some resource management component.

                                            You might try to find exactly which FreeBSD version introduced the issue. Looking at the other bug reports we've referenced in this thread it may have been 9.0 or 9.1.

                                            Steve

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.