Amd sempron 3400+
-
it depends on exact tasks you're trying to achieve
-
It might be hard to use ethernet card, check FreeBSD10.1 compatibility list
-
It would just be a small 10 - 15 device network running 24/7 for home use
-
To be certain to have success with the nics I would stick to Intel.
-
Probablybyou will need to use i386 version of Pfsense
-
Probablybyou will need to use i386 version of Pfsense
Un what facts to you base this assumption?
-
512mb of ddr ram
-
512mb of ddr ram
Ok. I thought you were referring to the CPU. Pfsense however recommends using x86_64 if your CPU supports 64 bit regardless of the amount of RAM.
-
I've been running a Sempron 3400 in a Pfsense box I built for our church. I have 1GB RAM in mine (2 512MB sticks I had laying around). I've always ran the x64 code - starting with 2.1 and now 2.2 beta.
It easily handles the 30/5 cable modem fine with up to 150 users (mostly phones, but we occasionally see folks bring in tablets).
I did use real Intel nics.
Adam
-
There appear to be two Sempeon 3400+ processors that run at 2GHz. Both support AMD64.
1GB will be a lot better than 512MB if you can find another stick of dram particularly if you want to run anything additional.That wifi card should work in 2.2. I wouldn't count on it. If you have the card already then try it.
https://forum.pfsense.org/index.php?topic=84358.msg464244#msg464244That Rosewill dual nic looks to be based on the Realtek rtl8169 which is best avoided. There's a review stating it bahaved badly with pfSense at newegg.
Steve
-
for a basic system not running squid,etc - it will be sufficient
edit: see if you can add another 512 or 1gb of ddr1 for cheap
for wifi, you may want to use an external router as a accesspoint with the pfsense doing the DHCP,etc
