Squid3 can't find libmd5.so.0

chiwalfrm

All four errors for your reference.

[2.2-RC][admin@pfSense.localdomain]/var/squid: Shared object "libmd5.so.0" not found, required by "squid"
Shared object "libmd5.so.0" not found, required by "squid"
Shared object "libmd5.so.0" not found, required by "squid"
Shared object "libmd5.so.0" not found, required by "squid"
Shared object "libmd5.so.0" not found, required by "squid"

[2.2-RC][admin@pfSense.localdomain]/var/squid: Shared object "libecap.so.2" not found, required by "squid"
Shared object "libecap.so.2" not found, required by "squid"
Shared object "libecap.so.2" not found, required by "squid"
Shared object "libecap.so.2" not found, required by "squid"
Shared object "libecap.so.2" not found, required by "squid"

[2.2-RC][admin@pfSense.localdomain]/var/squid: FATAL: Unable to open configuration file: /usr/local/etc/squid/squid.conf: (2) No such file or directory
Squid Cache (Version 3.4.10): Terminated abnormally.
CPU Usage: 0.010 seconds = 0.010 user + 0.000 sys
Maximum Resident Size: 50592 KB
Page faults with physical i/o: 0
FATAL: Unable to open configuration file: /usr/local/etc/squid/squid.conf: (2) No such file or directory
Squid Cache (Version 3.4.10): Terminated abnormally.
CPU Usage: 0.009 seconds = 0.009 user + 0.000 sys
Maximum Resident Size: 45744 KB
Page faults with physical i/o: 0
FATAL: Unable to open configuration file: /usr/local/etc/squid/squid.conf: (2) No such file or directory
Squid Cache (Version 3.4.10): Terminated abnormally.
CPU Usage: 0.009 seconds = 0.009 user + 0.000 sys
Maximum Resident Size: 46256 KB
Page faults with physical i/o: 0
FATAL: Unable to open configuration file: /usr/local/etc/squid/squid.conf: (2) No such file or directory
Squid Cache (Version 3.4.10): Terminated abnormally.
CPU Usage: 0.009 seconds = 0.009 user + 0.000 sys
Maximum Resident Size: 46256 KB
Page faults with physical i/o: 0
FATAL: Unable to open configuration file: /usr/local/etc/squid/squid.conf: (2) No such file or directory
Squid Cache (Version 3.4.10): Terminated abnormally.
CPU Usage: 0.009 seconds = 0.009 user + 0.000 sys
Maximum Resident Size: 46080 KB
Page faults with physical i/o: 0

[2.2-RC][admin@pfSense.localdomain]/var/squid: 2015/01/04 14:28:52 kid1| ERROR: unlinkd_program /usr/local/libexec/squid/unlinkd: (2) No such file or directory
FATAL: unlinkd_program /usr/local/libexec/squid/unlinkd: (2) No such file or directory
Squid Cache (Version 3.4.10): Terminated abnormally.
CPU Usage: 0.010 seconds = 0.010 user + 0.000 sys
Maximum Resident Size: 46256 KB
Page faults with physical i/o: 0
2015/01/04 14:28:55 kid1| ERROR: unlinkd_program /usr/local/libexec/squid/unlinkd: (2) No such file or directory
FATAL: unlinkd_program /usr/local/libexec/squid/unlinkd: (2) No such file or directory
Squid Cache (Version 3.4.10): Terminated abnormally.
CPU Usage: 0.010 seconds = 0.005 user + 0.005 sys
Maximum Resident Size: 51088 KB
Page faults with physical i/o: 0
2015/01/04 14:28:58 kid1| ERROR: unlinkd_program /usr/local/libexec/squid/unlinkd: (2) No such file or directory
FATAL: unlinkd_program /usr/local/libexec/squid/unlinkd: (2) No such file or directory
Squid Cache (Version 3.4.10): Terminated abnormally.
CPU Usage: 0.010 seconds = 0.000 user + 0.010 sys
Maximum Resident Size: 46080 KB
Page faults with physical i/o: 0
2015/01/04 14:29:01 kid1| ERROR: unlinkd_program /usr/local/libexec/squid/unlinkd: (2) No such file or directory
FATAL: unlinkd_program /usr/local/libexec/squid/unlinkd: (2) No such file or directory
Squid Cache (Version 3.4.10): Terminated abnormally.
CPU Usage: 0.010 seconds = 0.010 user + 0.000 sys
Maximum Resident Size: 46256 KB
Page faults with physical i/o: 0
2015/01/04 14:29:04 kid1| ERROR: unlinkd_program /usr/local/libexec/squid/unlinkd: (2) No such file or directory
FATAL: unlinkd_program /usr/local/libexec/squid/unlinkd: (2) No such file or directory
Squid Cache (Version 3.4.10): Terminated abnormally.
CPU Usage: 0.010 seconds = 0.010 user + 0.000 sys
Maximum Resident Size: 46080 KB
Page faults with physical i/o: 0

chiwalfrm

Also various pinger errors although these don't seem to do any harm.

2015/01/04 14:41:58| pinger: Initialising ICMP pinger …
2015/01/04 14:41:58| icmp_sock: (1) Operation not permitted
2015/01/04 14:41:58| pinger: Unable to start ICMP pinger.
2015/01/04 14:41:58| icmp_sock: (1) Operation not permitted
2015/01/04 14:41:58| pinger: Unable to start ICMPv6 pinger.
2015/01/04 14:41:58| FATAL: pinger: Unable to open any ICMP sockets.

akvadrat

Seems to be a fix on the way.
https://forum.pfsense.org/index.php?topic=85965.0

/Anders

KOM

While I haven't kept up on every dev build, Squid 3 on 2.2 hasn't worked for me at all since last November. In that time frame, they have gone from 2.2 Beta to 2.2 RC. How you can go from a beta to RC with a major package being broken all along is a mystery to me.

And, honestly, I can't be bothered trying to play around with symlinks and putting on my detective hat to get something working that should already work straight away considering it's an RC. cmb has already said that any hacks to get it working will likely either break something else or be wiped away with an update. I must say that I'm a little disappointed.

mir

squid2 does work though so if there is nothing which is only in squid3 you need you can try with squid2.

KOM

I know that, but I'd rather not spend time & effort working with an ancient package. Squid 2.x hasn't been updated in almost 5 years. I don't know if the ESF guys tweak it at all, but the base Squid 2.7.9 was released March 2010.

Cino

As far as I know squid2 is maintain by the pfsense team while squid3 is by a community forum member.

Topper727

https://forum.pfsense.org/index.php?topic=85965.0;topicseen

in this topic there is someone working on these issues

Cino

yup, the developer of the squid3 package… we just have to be patience.

marcelloc

@Cino:

As far as I know squid2 is maintain by the pfsense team while squid3 is by a community forum member.

Squid2 has been removed from freebsd ports. So I think it will not be in pfsense 2.2.

The way I'm testing squid3.4 on pfsense 2.2 until pbi builds are ok is using pkg add (very similar the way pfsense 2.0 works)

At least with pkg, all squid functions(including captive portal integration) are working.

Cino

Thanks Marcelloc!

Would it be possible for you to provide the steps your doing to install it correctly?

I'm assuming you install squid3.4 via pfSense Packages.. Once its installed, you then run pkg_add from the cmdline

I dont have access to my 2.2 test box at the moment but I looked at http://ftp.freebsd.org/pub/FreeBSD/ports/amd64/packages/All/ and only see squid-2.7.9_4.tbz, squid32-3.2.13.tbz, squid33-3.3.11.tbz.. I'm probably looking at the wrong repository since the file dates for those packages at almost a year ago and https://www.freebsd.org/cgi/ports.cgi?query=squid&stype=all shows squid-3.4.10_2 and squid33-3.3.13_2 only; no Squid2.

Have you ran into any issues with perl5-5.18.4_11 being installed? This would probably temporary fix the issues with lightsquid not being able to call perl

marcelloc

This is a workaround to get squid 3.4 working o pfsense 2.2(amd64) until pbi build are ok for this package.

This is not supported by core team! Use at your own risk!

First install squid package from pfsense gui
Next, we need to install pkg on pfsense 2.2, this can be done via console with

pkg install axel

when it asks to proceed(proceed with this action?), you can cancel it if you do not need axel on your system

kill and uninstall any running squid daemon

killall squid
pbi delete squid-3.4.10_2-amd64
rm -rf /usr/pbi/squid-amd64

if you have applied any patch or symlink while trying to run pbi squid version

rm -f /usr/lib/libmd5.so.0
rm -f /usr/lib/libecap.so.2
rm -rf /usr/local/etc/squid
rm -rf /usr/local/libexec/squid

create a folder to download squid3.4 package

mkdir /root/squid34
cd /root/squid34
fetch http://e-sac.siteseguro.ws/packages/10/All/squid34_pfsense22.tar
tar -xvf squid34_pfsense22.tar
pkg add squid-3.4.10_2.txz
pkg add squidclamav-6.10_2.txz
pkg add clamav-0.98.5_1.txz

Save config on gui again and test squid.

samham

I'm getting "Signature for pkg not available" after the pkg command

marcelloc

@samham:

I'm getting "Signature for pkg not available" after the pkg command

Finish the pkg install axel cmd

mhab12

Will the same procedure work on 2.1.5?

Cino

@mhab12:

Will the same procedure work on 2.1.5?

It wont work on 2.1.5. The files that marcelloc complied are for freebsd10 amd64. 2.1.5 was built on 8.3.. Squid3-dev works on 2.1.5

mrancier

Transparent proxy still does not work :(

marcelloc

@mhab12:

Will the same procedure work on 2.1.5?

On 2.1.5, install squid3-dev package. I uses squid 3.3.10

marcelloc

@mrancier:

Transparent proxy still does not work :(

Maybe related to some 2.2 RC issues, not squid itself.

Check if you don't have this error on your system logs

php: rc.filter_configure: PHP ERROR: Type: 2, File: /etc/inc/util.inc, Line: 184, Message: fsockopen(): unable to connect to unix:///var/run/check_reload_status:-1 (No such file or directory)

tracking this issue I've found this:

ldd /usr/local/sbin/check_reload_status
/usr/local/sbin/check_reload_status:
        libsbuf.so.6 => /lib/libsbuf.so.6 (0x80084c000)
        libevent-2.0.so.5 => not found (0)
        libc.so.7 => /lib/libc.so.7 (0x800a4f000)

trying a manual fix:

ln -s /usr/local/lib/libevent-2.0.so.5 /lib/libevent-2.0.so.5

and check_reload_status seems to be ok again

ldd /usr/local/sbin/check_reload_status
/usr/local/sbin/check_reload_status:
        libsbuf.so.6 => /lib/libsbuf.so.6 (0x80084c000)
        libevent-2.0.so.5 => /lib/libevent-2.0.so.5 (0x800a4f000)
        libc.so.7 => /lib/libc.so.7 (0x800c91000)
        libthr.so.3 => /lib/libthr.so.3 (0x801023000)

and also transparent proxy

grep 3128 /tmp/rules.debug
rdr on em1 proto tcp from any to !(em1) port 80 -> 127.0.0.1 port 3128
pass in quick on em1 proto tcp from any to !(em1) port {80,443,3128,3127} flags S/SA keep state

I've opened a redmine for it, so core team can check this issue

mrancier

I can confirm that error. It was also accompanied by sshd being unable to start. Reverting changes didn't help, but reinstalling the snapshot fixed sshd. I will try the fix you described sometime tomorrow. Thank you!

@marcelloc:

@mrancier:

Transparent proxy still does not work :(

Maybe related to some 2.2 RC issues, not squid itself.

Check if you don't have this error on your system logs

php: rc.filter_configure: PHP ERROR: Type: 2, File: /etc/inc/util.inc, Line: 184, Message: fsockopen(): unable to connect to unix:///var/run/check_reload_status:-1 (No such file or directory)

tracking this issue I've found this:

ldd /usr/local/sbin/check_reload_status
/usr/local/sbin/check_reload_status:
        libsbuf.so.6 => /lib/libsbuf.so.6 (0x80084c000)
        libevent-2.0.so.5 => not found (0)
        libc.so.7 => /lib/libc.so.7 (0x800a4f000)

trying a manual fix:

ln -s /usr/local/lib/libevent-2.0.so.5 /lib/libevent-2.0.so.5

and check_reload_status seems to be ok again

ldd /usr/local/sbin/check_reload_status
/usr/local/sbin/check_reload_status:
        libsbuf.so.6 => /lib/libsbuf.so.6 (0x80084c000)
        libevent-2.0.so.5 => /lib/libevent-2.0.so.5 (0x800a4f000)
        libc.so.7 => /lib/libc.so.7 (0x800c91000)
        libthr.so.3 => /lib/libthr.so.3 (0x801023000)

and also transparent proxy

grep 3128 /tmp/rules.debug
rdr on em1 proto tcp from any to !(em1) port 80 -> 127.0.0.1 port 3128
pass in quick on em1 proto tcp from any to !(em1) port {80,443,3128,3127} flags S/SA keep state

I've opened a redmine for it, so core team can check this issue