How do I Open port 80 and 443 on pfsense ?

branyster

I still cannot get out onto the Internet from my Server. Using IE

Derelict

How about you post the same debugs from the server you're having trouble with?

Looks like everything's fine from that host.

branyster

Whoops !

C:\Users\Administrator>ping 4.2.2.2

Pinging 4.2.2.2 with 32 bytes of data:
Reply from 10.1.1.10: Destination host unreachable.
Reply from 10.1.1.10: Destination host unreachable.
Reply from 10.1.1.10: Destination host unreachable.
Reply from 10.1.1.10: Destination host unreachable.

Ping statistics for 4.2.2.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

C:\Users\Administrator>tracert 4.2.2.2

Tracing route to 4.2.2.2 over a maximum of 30 hops

1 <1 ms <1 ms <1 ms pfSense.localdomain [10.1.1.10]
2 pfSense.localdomain [10.1.1.10] reports: Destination host unreachable.

Trace complete.

Derelict

Looks like pfSense doesn't have a default gateway set.

branyster

Oh Boy ! Now after adding in my gateway 192.168.1.254 and clicking add my Mac Address. Something about Spoof.

Im locked out of pfsense, my ESXi Host and my Lab ! Yikes !

Please No Applause !

riahc3

Can you tell us a bit about your network?

What is the IP address of your Gateway? The server? Subnet mask?

johnpoz

1 <1 ms <1 ms <1 ms pfSense.localdomain [10.1.1.10]
2 pfSense.localdomain [10.1.1.10] reports: Destination host unreachable.

Why is your second hop pfsense itself? Do you not have a gateway on wan? Did you set one on lan.. We see this a LOT where users for some unknown reason when it cleary says not to set a gateway on LAN, point the gateway to pfsense or something out of the blue, etc..

LAN interfaces do not have gateways set!!! If you set them, they become wan interfaces ;)

branyster

Restarted ESXi Host. I was then able to vsphere client back onto Host. Then Disabled pfsense NIC's. Reset to Factory and I went through the Wizard and configured the LAN and WAN DNS everything works on my Server side now too. IE and MS Updates

Thanks Guys. Nick Branson

johnpoz

future ref.. If your running pfsense on vm infrastructure you might want to mention that in your original post ;)

But can not really tell if pfsense is on the esxi host, or your 2k12 client?