No pfftpproxy parameters in system tunables
-
Hi everyone,
I got a problem with one pfsense box.
I need to disable the FTP proxy, but in the system tunables page, the debug.pfftpproxy parameters does not appear…I paste the availables parameters:
net.inet.tcp.blackhole Drop packets to closed TCP ports without returning a RST default (2)net.inet.udp.blackhole Do not send ICMP port unreachable messages for closed UDP ports default (1)
net.inet.ip.random_id Randomize the ID field in IP packets (default is 0: sequential IP IDs) default (1)
net.inet.tcp.drop_synfin Drop SYN-FIN packets (breaks RFC1379, but nobody uses it anyway) default (1)
net.inet.ip.redirect Sending of IPv4 ICMP redirects default (1)
net.inet6.ip6.redirect Sending of IPv6 ICMP redirects default (1)
net.inet.tcp.syncookies Generate SYN cookies for outbound SYN-ACK packets default (1)
net.inet.tcp.recvspace Maximum incoming TCP datagram size default (65228)
net.inet.tcp.sendspace Maximum outgoing TCP datagram size default (65228)
net.inet.ip.fastforwarding Fastforwarding (see http://lists.freebsd.org/pipermail/freebsd-net/2004-January/002534.html) default (0)
net.inet.tcp.delayed_ack Do not delay ACK to try and piggyback it onto a data packet default (0)
net.inet.udp.maxdgram Maximum outgoing UDP datagram size default (57344)
net.link.bridge.pfil_onlyip Handling of non-IP packets which are not passed to pfil (see if_bridge(4)) default (0)
net.link.tap.user_open Allow unprivileged access to tap(4) device nodes default (1)
kern.randompid Randomize PID's (see src/sys/kern/kern_fork.c: sysctl_kern_randompid()) default (347)
net.inet.tcp.inflight.enable The system will attempt to calculate the bandwidth delay product for each connection and limit the amount of data queued to the network to just the amount required to maintain optimum throughput. default (1)
net.inet.icmp.icmplim Set ICMP Limits default (0)
net.inet.tcp.tso TCP Offload engine default (1)
net.inet.ip.portrange.first Set the ephemeral port range starting port default (1024)
hw.syscons.kbd_reboot Enables ctrl+alt+delete default (0)
kern.ipc.maxsockbuf Maximum socket buffer size default (4262144)
net.link.bridge.pfil_member Set to 0 to disable filtering on the incoming and outgoing member interfaces. 1
net.link.bridge.pfil_bridge Set to 1 to enable filtering on the bridge interface 0
Does anybody know why the pfftpproxy parameter is not available ?
I'm in the 2.1.5 version (i386)Thanks a lot
-
If your config.xml was created before the tunable existed, it won't be listed.
Just click + and add it to the list yourself. It works the same.
-
Thanx a lot !!
It did the trick ;D