ZFS - a possible source of some 2.1 whackiness?
-
ZFS is NOT used in 2.1
This is just a message that should not be there AFAIK…Ahhh and link: http://forum.pfsense.org/index.php?topic=62156.0
-
This is a major issue for me. Just upgraded from 2.03 and REGRETTING IT!!!
My first problem (related to this post) is that my router now boots intermittently, it pauses or STOPS boot process while displaying the following (copied from above):
Sep 27 10:52:20 kernel: ZFS filesystem version 5
Sep 27 10:52:20 kernel: ZFS storage pool version 28These messages happen after it finds and loads the driver for the AVRIQ-USB virtual CD-ROM device (my avocent KVM over IP dongle.) Any help in stopping ZFS from trying to instanstiate a storage pool at a boot (which I DID NOT CONFIGURE) would be greatly appreciated.
Thanks.
-
BTW, just tested and the same issue happens when I boot wihtout the AVRIQ-USB dongle, so it's not the driver. ARRGH!!!
-
This is a major issue for me. Just upgraded from 2.03 and REGRETTING IT!!!
My first problem (related to this post) is that my router now boots intermittently, it pauses or STOPS boot process while displaying the following (copied from above):
Sep 27 10:52:20 kernel: ZFS filesystem version 5
Sep 27 10:52:20 kernel: ZFS storage pool version 28These messages happen after it finds and loads the driver for the AVRIQ-USB virtual CD-ROM device (my avocent KVM over IP dongle.) Any help in stopping ZFS from trying to instanstiate a storage pool at a boot (which I DID NOT CONFIGURE) would be greatly appreciated.
Thanks.
Got the same exact problem here. had to waste half a day off blowing out my pfsense and putting all the settings back… really sucks!
-
ZFS isn't used at all, it's simply in the kernel if someone wants to do something with it.
djlax152: what were you attempting, and what happened?
-
Although ZFS is not used I also changed the loader.conf settings just to eliminate the warning message.
512000000 is not 512 MB
512 MB = 512 * 1024^2 = 536870912
#vm.kmem_size="435544320"
#vm.kmem_size_max="535544320"
vm.kmem_size="536870912"
vm.kmem_size_max="536870912" -
so where exactly do you make this change.. I wouldn't mind removing that error on the boot..
-
/boot/loader.conf ;)
-
You should put that in loader.conf.local no?
-
You should put that in loader.conf.local no?
Yes, always put user-defined things in .local so upgrades don't overwrite.