Firewall NAT Port Forward Help

johnpoz

When you say router you mean pfsense? I don't even think pfsense supports telnet?? SSH sure, but has to be turned on its not on out of the box.

You would never want to enable telnet to the public internet.. And as mentioned, its not even used internally any more ;)

If you want to admin anything internally on your network, or even pfsense - I would sugggest you vpn in, and then you can admin whatever you want using whatever protocol you want, ssh, telnet, webgui, rdp, etc. etc..

cpatte7372

Hi guys,

Thanks for responding.

I take your point regarding telnet. Therefore, I will go with SSH.

So I need to SSH to a router via pfsense.

I might not be explaining myself well enough, but to be honest I assumed most people on this forum would have worked with Cisco routers, switches etc…

I can't be the first person asking this question.

I would like to remotely connect to a router that is behind my pfSense firewall. The router has the private address 192.168.1.3.

Clearly I can't SSH onto the router from the Internet to the private address. My pfSense firewall has a WAN address, say 74.65.78.12 and the router with the private address 192.168.1.3 sits behind the pfSense with the WAN ip address, 74.65.78.12.

I have configured the firewall:nat as shown in the image, but it doesn't work.

Can someone please help me.

Carlton

asa.PNG_thumb

JoelLinn

ahhhh
so your pfSense is not your router in this case ;D took some time…...

In your screenshot there is no Redirect target port entered. You should enter SSH there to.

But even if you do that there is a possibility that your Router doesn't allow connections from any network(only local or known nets).
If that's the case, you should consult your router documentation.

cpatte7372

Joel

Thanks for responding.

May be the I didn't explain myself well as the other responders didn't come close to understanding what I am trying to achieve.

Anyway, I have added SSH to Redirect target port.

So, when I ssh to 74.65.78.12 should I be directed to 192.168.1.3?

If so, it doesn't work

cpatte7372

Hi,

I have to appreciate that members here aren't too familiar with routers, therefore I'll provide another sample. This time I would like to RDP to a remote Windows Workstation, ip address 192.168.1.2, sitting behind my firewall

The pfSense firewall has an WAN ip address (not real) 74.75.89.1

I have configured the firewall NAT Porward Edit as shown in the image.

Can someone please tell me why this won't work…

asa.PNG_thumb

Derelict

Can someone please tell me why this won't work…

What's the corresponding firewall rule look like?

cpatte7372

Derelict

See image for corresponding firewall

image.jpg_thumb

cpatte7372

Oops

image.jpg_thumb

Derelict

Should work fine. Does 192.168.1.2 default route back to pfSense? Does it allow inbound MSRDP from "unfriendly" networks?

cpatte7372

Hi derelict

192.168.1.2 doesn't default to pfsense. However, I an RDP to from unfriendly networks.

I don't undersatnd - it should work

Derelict

Well, the return traffic is going to go wherever the default route tells it to go. If that's not the router node with the NAT translation it's not going to work.

cpatte7372

The ofsense LAN address is 192.168.1.1, the public address is 74.x.x.x. Are you saying that the default route on the Workstation should be 192.168.1.1?

Derelict

Yes. If you want this to work it has to be.

cpatte7372

Ok,

Going to get out of bed and try now..

Back in 5mins

cpatte7372

Brilliant

That worked

Thanks Derelict