2.01 embedded on 256MB Compact Flash
-
Can it be done and how if it can be done?
For some strange reason my CF-readers will not accept 1 or 4 Gb cards but it will run from a 256MB card.
I know there is a 512MB image out there but i don't have a 512 card and the stores around here doesn't have anything smaller than a 4GB. -
Nope! ;)
Your CF card reader probably doesn't support UDMA correctly and most newer and larger cards are UDMA.
See: http://www.fccps.cz/download/adv/frr/cf.htmlDepending on how your card reader is connected your may be able to disable DMA.
Steve
-
Well that explains why it wont boot but it doesn't explain why i shouldn't be able to put an image on a 256 card :)
On the other hand
Never Mind - IT BOOTED :)The link talked about disabling IDE features so I turned of everything i Could in the Bios Regarding to HDD features and now it boots.
Not fast - not fast at all but it boots and that is what counts ;DThanks Man
-
For anyone else running into the same problem.
My motherboard is a asus P5p800 SE.
Latest bios (803 i think)
One IDE CF card reader with a sandisk ultra 4GB cardWhat i did was to set the primary master (the cf card) in Bios to
Lba:auto
Pio mode: 2
Udma: 0
And to only use single word dma.With that it boots the 2.01 4Gb embedded image without problems.