PfSense 2.2: Squid 3.4.10_2 pkg 0.2.6 redirection not working in transparent mode

Steve Evans

Squid logs. I changed the default logging directory some time ago (under 2.1) as all the other pfSense logs are under /var/logs. I'll switch it back in case that makes a difference.

When accessing the proxy direct I see the expected per access entries in access.log.

Steve

Steve Evans

Regardless of logging path, using squid direct I see logging, such as

: tail /var/squid/logs/access.log
1422370314.239     61 10.5.1.144 TCP_MISS/200 681 GET http://stat.flashtalking.com/reportV3/ft.stat? - HIER_DIRECT/172.224.35.210 text/plain
1422370314.284     16 10.5.1.144 TCP_MISS/304 360 GET http://cdn.flashtalking.com/38651/O2UKL0861C_JanSale_samsung_300x250.swf - HIER_DIRECT/172.224.35.210 application/x-shockwave-flash
1422370314.293     16 10.5.1.144 TCP_MISS/304 360 GET http://cdn.flashtalking.com/38651/O2UKL0861C_JanSale_samsung_728x90.swf - HIER_DIRECT/172.224.35.210 application/x-shockwave-flash
1422370314.296    223 10.5.1.144 TCP_MISS/200 1056 GET http://a.dpmsrv.com/dpmpxl/index.php? - HIER_DIRECT/107.23.105.222 text/javascript
1422370314.696     24 10.5.1.144 TCP_MISS/200 631 GET http://pagead2.googlesyndication.com/activeview? - HIER_DIRECT/64.233.167.154 image/gif
1422370315.170     49 10.5.1.144 TCP_MISS/302 939 GET http://ib.adnxs.com/seg? - HIER_DIRECT/37.252.163.24 text/html
1422370315.215     94 10.5.1.144 TCP_MISS/200 971 GET http://a.dpmsrv.com/dpmpxl/index.php? - HIER_DIRECT/107.23.105.222 text/javascript
1422370315.239     64 10.5.1.144 TCP_MISS/302 965 GET http://ib.adnxs.com/bounce? - HIER_DIRECT/37.252.163.24 text/html
1422370315.370    243 10.5.1.144 TCP_MISS/200 674 GET http://rtd.tubemogul.com/upi/? - HIER_DIRECT/107.21.248.242 image/png
1422370316.718     48 10.5.1.144 TCP_MISS/200 358 GET http://dt.adsafeprotected.com/dt? - HIER_DIRECT/69.172.216.111 image/gif

But with transparent mode, nothing.

Thanks,

Steve

Steve Evans

Not sure if it's relevant, but I'd noted the following in cache.log.

2015/01/27 15:17:02 kid1| Starting Squid Cache version 3.4.10 for i386-portbld-freebsd10.1...
2015/01/27 15:17:02| pinger: Initialising ICMP pinger ...
2015/01/27 15:17:02|  icmp_sock: (1) Operation not permitted
2015/01/27 15:17:02| pinger: Unable to start ICMP pinger.
2015/01/27 15:17:02|  icmp_sock: (1) Operation not permitted
2015/01/27 15:17:02| pinger: Unable to start ICMPv6 pinger.
2015/01/27 15:17:02| FATAL: pinger: Unable to open any ICMP sockets.
2015/01/27 15:17:04 kid1| Starting Squid Cache version 3.4.10 for i386-portbld-freebsd10.1...
2015/01/27 15:17:05| pinger: Initialising ICMP pinger ...
2015/01/27 15:17:05|  icmp_sock: (1) Operation not permitted
2015/01/27 15:17:05| pinger: Unable to start ICMP pinger.
2015/01/27 15:17:05|  icmp_sock: (1) Operation not permitted
2015/01/27 15:17:05| pinger: Unable to start ICMPv6 pinger.
2015/01/27 15:17:05| FATAL: pinger: Unable to open any ICMP sockets.

Not sure why this should be so I'd enabled the Disable ICMP option on the General settings tab which then gives a clean start thus.

2015/01/27 15:21:09 kid1| Starting Squid Cache version 3.4.10 for i386-portbld-freebsd10.1...
2015/01/27 15:21:11 kid1| Starting Squid Cache version 3.4.10 for i386-portbld-freebsd10.1...

Steve

Steve Evans

It's not too clear what happening from a browser perspective, but using telnet may be a little more informative.

From my laptop

$ telnet news.bbc.co.uk 80
Trying 212.58.244.56...

and then nothing.

Whereas

$ telnet pfsense 3128
Trying 10.5.1.1...
Connected to pfsense.
Escape character is '^]'.

clearly connects.

Trying the connection locally from the pfSense console

: telnet 127.0.0.1 3128
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.

works.

This suggests that the redirection is not working, or at least squid is not accepting redirected connections.

This is making me think that the redirected request may not even be reaching squid. I've tried adding a pass all rule to the firewall, but this had no effect. As mentioned before I see the firewall logging TCP packets being passed on port 3128 so I'm somewhat confused.

Steve

Steve Evans

I note the following applicable rule even if I disable my explicit rule such that I see the firewall log blocking access to 127.0.0.1:3128.

: pfctl -s rules | grep 3128
pass in quick on msk2 proto tcp from any to ! (msk2) port = 3128 flags S/SA keep state

I this state I see, from my laptop, immediate refused connections thus.

$ telnet news.bbc.co.uk 80
Trying 212.58.244.56...
telnet: connect to address 212.58.244.56: Connection refused
Trying 212.58.244.57...
telnet: connect to address 212.58.244.57: Connection refused
telnet: Unable to connect to remote host

If I re-enable my explicit rule such that the firewall logs the packet being passed, I see the following rules.

: pfctl -s rules | grep 3128
pass in log quick on msk2 inet proto tcp from any to any port = 3128 flags S/SA keep state label "USER_RULE: Squid Proxy"
pass in log quick on msk2 inet6 proto tcp from any to any port = 3128 flags S/SA keep state label "USER_RULE: Squid Proxy"
pass in quick on msk2 proto tcp from any to ! (msk2) port = 3128 flags S/SA keep state

Then the firewall logs a packet passed, but telnet hangs as per my previous post.

If I disable transparency mode I see that the extra rule is no longer there.

: pfctl -s rules | grep 3128
pass in log quick on msk2 inet proto tcp from any to any port = 3128 flags S/SA keep state label "USER_RULE: Squid Proxy"
pass in log quick on msk2 inet6 proto tcp from any to any port = 3128 flags S/SA keep state label "USER_RULE: Squid Proxy"

Is this extra rule somehow broken?

Steve

marcelloc

Did you selected lan on transparent interface?

if you execute grep 3128 /tmp/rules.debug you should see two rules, one for redirect and other to allow traffic.

rdr on em1 proto tcp from any to !(em1) port 80 -> 127.0.0.1 port 3128
pass in quick on em1 proto tcp from any to !(em1) port {80,3128} flags S/SA keep state

Steve Evans

Hi Marcelloc,

Your assistance with this is much appreciated.

Yes, LAN is selected as shown below. Note that SkyPlus is an alias for my Sky+ box which historically has refused to work with VOD services if proxied. It's presence in the config makes no difference.

I see the following

: grep 3128 /tmp/rules.debug
SquidProxy = "{   3128 }"
rdr on msk2 proto tcp from any to !(msk2) port 80 -> 127.0.0.1 port 3128
pass in quick on msk2 proto tcp from any to !(msk2) port {80,3128} flags S/SA keep state

Should I need to define a rule to allow LAN access to port 3128? It looks like the above should cover it, but this alone results in blocked packets.

Thanks,

Steve

ProxySetting.png_thumb

Steve Evans

OK, so I just found the following in /tmp/rules.debug, between my rule for port 3128 and the one added by squid.

block return  in log  quick  on $LAN inet from any to any tracker 1422139962  label "USER_RULE: IPv4 block"

As I block all traffic by default and only allow out what's explicitly permitted, and the squid rule is simply being appended to the ruleset, this makes sense now.

I'll try amending my rule to be an exact match and report back.

Steve

Steve Evans

So, due to my use of aliases my rule did show up with your grep.

: grep SquidProxy /tmp/rules.debug
SquidProxy = "{   3128 }"
pass  in log  quick  on $LAN inet proto tcp  from any to any port $SquidProxy tracker 1422139913 flags S/SA keep state  label "USER_RULE: Squid Proxy"

I realise my rules for proxy access were too weak as they would have allowed somebody on my network to use alternate proxy, so I've modified my rules thus, but this hasn't fixed transparency mode. :(

pass  in log  quick  on $LAN inet proto tcp  from any to $pfSense port $SquidProxy tracker 1422139913 flags S/SA keep state  label "USER_RULE: Squid Proxy"
pass  in log  quick  on $LAN inet proto tcp  from any to (self) port $SquidProxy tracker 1422382055 flags S/SA keep state  label "USER_RULE: Squid Proxy loopback"

Thanks,

Steve

marcelloc

Include 127.0.0.1 on your 3128 rule too.

Steve Evans

Is that not the same as self?

Steve

marcelloc

@Steve:

Is that not the same as self?

I don't know if is lan ip or any local ip (including lo0)

Steve Evans

Changed rules to

: grep SquidProxy /tmp/rules.debug
SquidProxy = "{   3128 }"
pass  in log  quick  on $LAN inet proto tcp  from any to $pfSense port $SquidProxy tracker 1422139913 flags S/SA keep state  label "USER_RULE: Squid Proxy"
pass  in log  quick  on $LAN inet proto tcp  from any to 127.0.0.1 port $SquidProxy tracker 1422382055 flags S/SA keep state  label "USER_RULE: Squid Proxy loopback"

No improvement.

Steve

Steve Evans

To prove the point that the redirected transparent connection is not getting through to squid, I stopped the squid process and then ran the following on the pfSense console.

: nc -l 3128

I then telnetted to pfsense from my laptop and a connection was established and characters passed.

$ telnet 10.5.1.1 3128
Trying 10.5.1.1...
Connected to pfsense.scevans.com.
Escape character is '^]'.
hello

: nc -Dl 3128
hello

I repeated trying to telnet to port 80 on news.bbc.co.uk which should have been directed by the redirect, and no connection was made.

Steve

Steve Evans

I've now turn off transparent mode and then added a NAT rule.

This appears in /tmp/rules.debug thus.

rdr on msk2 proto tcp from any to !10.5.1.0/24 port 80 -> 10.5.1.1 port 3128

I see the resulting packet to port 3128 being passed by the firewall in the logs on an attempt to access an external host on port 80 from LAN.

With squid stopped and running

nc -vl 3128

instead on the pfSense console this connection attempt is not seen.

Contacting pfSense directly from the LAN on port 3128 does get through.

Clearly the HTTP request gets redirected to port 3128, makes it through the firewall, but then gets lost.

I'm stumped.

Steve

redirectNAT.png_thumb

marcelloc

May be not related to the issue but do you have pfsense gui redirect enabled under system -> advanced?

All my testes were on pfsense 2.2 amd64, no cf or nanobsd.

What 2.2 version are you using?

Steve Evans

I have the Disable webConfigurator redirect rule checkbox ticked as I have WPAD running on port 80 using the vHosts web server. Unfortunately iPhones etc don't use WPAD so I need transparency mode, but I've left it turned on for now.

I'm using the recent full 2.2 release.

I've just tried putting a pass all rule at the start of my LAN rules to see if that would fix any firewall issue, but it did no good.

Steve

marcelloc

2.2 amd64?

Steve Evans

: uname -a
FreeBSD pfsense.scevans.com 10.1-RELEASE-p4 FreeBSD 10.1-RELEASE-p4 #0 36d7dec(releng/10.1)-dirty: Thu Jan 22 15:19:32 CST 2015     root@pfsense-22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_wrap.10.i386  i386
: cat /etc/version
2.2-RELEASE

I've just rebooted the firewall with all pf rules reverted to those in /conf.default/config.xml. This should eliminate any firewall rule peculiarities. I'll let you know how that works once it's up.

Thanks,

Steve

marcelloc

I have two users on portuguese forum with same version 2.2-RELEASE-i386 and same issue.

Maybe it's related to squid pbi package compilation under i386 system.