SOLVED: Nc380t not working after 2.2 upgrade
-
Here is the dmesg.boot file. It looks like a driver issue as it is showing Reset failed and Controller reset failed and then PCI memory allocation failed. Hope it helps find the issue.
Copyright
1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p4 #0 36d7dec(releng/10.1)-dirty: Thu Jan 22 15:12:35 CST 2
015
root@pfsense-22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_
SMP.10 amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz (2128.05-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Family = 0x6 Model = 0xf Stepping = 6
Features=0xbfebfbff<fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,c<br>MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm>AMD Features=0x20100800 <syscall,nx,lm>AMD Features2=0x1 <lahf>VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4088528896 (3899 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ptltd ="" apic ="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <version 2.0="">irqs 0-23 on motherboard
wlan: mac acl policy registered
random: <software, yarrow="">initialized
kbd1 at kbdmux0
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <ptltd rsdt="">on motherboard
acpi0: Power Button (fixed)
cpu0: <acpi cpu="">on acpi0
cpu1: <acpi cpu="">on acpi0
atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <at timer="">port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
vgapci0: <vga-compatible display="">port 0x30c0-0x30c7 mem 0xd4000000-0xd40fffff,0
xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <intel 946gz="" svga="" controller="">on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
vgapci0: Boot video device
pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0
pcib1: failed to allocate initial memory window: 0xd0000000-0xd3ffffff
pci1: <acpi pci="" bus="">on pcib1
pcib2: <acpi pci-pci="" bridge="">at device 0.0 on pci1
pcib2: failed to allocate initial memory window: 0xd0000000-0xd1ffffff
pci2: <acpi pci="" bus="">on pcib2
bce0: <hp nc380t="" pcie="" dp="" multifunc="" gig="" server="" adapter="" (a2)="">irq 16 at device 4.0
on pci2
bce0: /usr/pfSensesrc/src/sys/dev/bce/if_bce.c(5034): Reset failed!
bce0: /usr/pfSensesrc/src/sys/dev/bce/if_bce.c(1305): Controller reset failed!
device_attach: bce0 attach returned 6
pcib3: <pci-pci bridge="">at device 0.2 on pci1
pcib3: failed to allocate initial memory window: 0xd2000000-0xd3ffffff
pci3: <pci bus="">on pcib3
bce0: <hp nc380t="" pcie="" dp="" multifunc="" gig="" server="" adapter="" (a2)="">irq 17 at device 5.0
on pci3
bce0: 0x2000000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
bce0: /usr/pfSensesrc/src/sys/dev/bce/if_bce.c(1060): PCI memory allocation fail
ed
device_attach: bce0 attach returned 6
pcib4: <acpi pci-pci="" bridge="">irq 16 at device 28.4 on pci0
pci4: <acpi pci="" bus="">on pcib4
em0: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0x4000-0x401f mem 0xd4100
000-0xd411ffff irq 16 at device 0.0 on pci4
em0: Using an MSI interrupt
pcib5: <acpi pci-pci="" bridge="">irq 17 at device 28.5 on pci0
pci5: <acpi pci="" bus="">on pcib5
em1: <intel(r) 1000="" pro="" network="" connection="" 7.4.2="">port 0x5000-0x501f mem 0xd4200
000-0xd421ffff irq 17 at device 0.0 on pci5
em1: Using an MSI interrupt
uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a="">port 0x3000-0x301f irq 16 at d
evice 29.0 on pci0
usbus0 on uhci0
uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b="">port 0x3020-0x303f irq 17 at d
evice 29.1 on pci0
usbus1 on uhci1
uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c="">port 0x3040-0x305f irq 18 at d
evice 29.2 on pci0
usbus2 on uhci2
uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d="">port 0x3060-0x307f irq 19 at d
evice 29.3 on pci0
usbus3 on uhci3
ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xd4500000-0xd45003ff irq
16 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib6: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci6: <acpi pci="" bus="">on pcib6
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel ich7="" sata300="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0x30b0-0x30bf at device 31.2 on pci0
ata0: <ata channel="">at channel 0 on atapci0
ata1: <ata channel="">at channel 1 on atapci0
acpi_button0: <power button="">on acpi0
atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <isa option="" roms="">at iomem 0xc0000-0xcafff,0xcb000-0xcbfff on isa0
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <enhanced speedstep="" frequency="" control="">on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 828082806000828
device_attach: est0 attach returned 6
p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
est1: <enhanced speedstep="" frequency="" control="">on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 828082806000828
device_attach: est1 attach returned 6
p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen2.1: <intel>at usbus2
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
ugen1.1: <intel>at usbus1
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
ugen0.1: <intel>at usbus0
uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen4.1: <intel>at usbus4
uhub3: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
Copyright 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p4 #0 36d7dec(releng/10.1)-dirty: Thu Jan 22 15:12:35 CST 2
015
root@pfsense-22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_
SMP.10 amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz (2128.05-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Family = 0x6 Model = 0xf Stepping = 6
Features=0xbfebfbff<fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,c<br>MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd <sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm>AMD Features=0x20100800 <syscall,nx,lm>AMD Features2=0x1 <lahf>VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4088528896 (3899 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ptltd ="" apic ="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs</ptltd ></lahf></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,c<br></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></generic></system></isa></at></keyboard></power></ata></ata></intel></isa></pci-isa></acpi></acpi></intel></intel></intel></intel></intel></intel(r)></acpi></acpi></intel(r)></acpi></acpi></hp></pci></pci-pci></hp></acpi></acpi></acpi></acpi></intel></vga-compatible></acpi></acpi></at></at></acpi></acpi></ptltd ></software></software,></version></ptltd ></lahf></syscall,nx,lm></sse3,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,c<br> -
Well interesting that your box finds the Intel NICs no problem. Can you change the slot the card is in?
If you look at the logs the OS finds PCI bus 2 and fails to allocate some memory. Then it finds a bce NIC on PCI bus 2 and fails to attach to it. Then it finds PCI bus and again fails to allocate memory before finding another bce NIC on it and failing to attach.Steve
-
It is interesting that it does that. Almost like it is trying to start but can't and tries again. Unfortunately, I cannot change slots as this system has only one PCI Express slot. Maybe something with the driver in Freebsd 10.1 versus 8.3?
-
Should I file a bug report on this one?
-
This is almost certainly a FreeBSD bug rather than a pfSense bug. If you can, try running FreeBSD 10.1. If that does exactly the same thing then file a bug report there.
Steve
-
Looks like you may have hit the same thing as this:
https://forum.pfsense.org/index.php?topic=84909.0
I don't think a solution has been found yet. :(Steve
Edit: Typo
Yes, a workaround solution was found, suggested by John Baldwin:
https://forum.pfsense.org/index.php?topic=84909.msg475793#msg475793 Specifically:hint.agp.0.disabled=1
in loader.conf fixes the problem. :)Interesting, both systems have the same agp0 video device, and the comments in the bug report implicate agp, so maybe that will work here too. If that doesn't work, you could instead try:
debug.acpi.disabled="hostres"
I'm not sure debug.acpi.disabled is still an option on FreeBSD 10.1; it was on 9.0. Even if it doesn't fix the problem, looking at the dmesg difference with and without the debug option set may provide some insight. Oh, and those changes should go into /boot/loader.conf.local rather than /boot/loader.conf (otherwise the change(s) would not survive an upgrade).
-
That was only a few weeks ago. Clearly my memory is failing. ::)
Steve
-
Thanks charliem that did the trick. ;D
Yes, a workaround solution was found, suggested by John Baldwin:
https://forum.pfsense.org/index.php?topic=84909.msg475793#msg475793 Specifically:
Quotehint.agp.0.disabled=1
in loader.conf fixes the problem. :)The card is now found and working just like before. dmesg.boot now shows the card and both interfaces are showing up in pfsense. Thanks to John Baldwin too. My pfsense box is back!!
-
Nice. :)
You should put that in /boot/loader.conf.local, create the file. That gets copied across an update and is intended for custom loader tweaks like this.Steve
-
I originally had it in the loader.conf and then read the entire post and saw that it should be in the .local file (as you mentioned). I created the .local file and added that plus the Intel license ack stuff also. So faro so good. :D
-
This fix does not seem to be working for me with a EXPI9301CT card. Any other ideas?
-
You're seeing the same memory allocation error in the boot log?
Steve
-
Never mind, I think the NIC randomly died on me. It is not being detected in Windows on another PC either now.
Just for future reference, how would you go about getting the dmesg.boot file or edit the loader.conf if you don't have access to the GUI. Can you do this by shell/SSH somehow? I don't have a VLAN capable switch, so I don't think I can get access to pfsense with only 1 NIC installed in it.
-
Yes, if you have ssh access you can use SCP to get the files directly from a connected client.
If you only have local console access you can view the boot files like:
cat /var/log/dmesg.bootOr edit the loader.conf (or better loader.conf.local) like:
ee /boot/loader.conf.localThat will use the built in EasyEditor but you could use vi instead.
Steve
