What Squid version and SquidGuard or DansGuardian?
-
Can your ping database.clamav.net from your box?
-
Yes
PING db.other.clamav.net (193.1.193.64): 56 data bytes 64 bytes from 193.1.193.64: icmp_seq=0 ttl=51 time=35.980 ms 64 bytes from 193.1.193.64: icmp_seq=1 ttl=51 time=40.412 ms 64 bytes from 193.1.193.64: icmp_seq=2 ttl=51 time=35.124 ms --- db.other.clamav.net ping statistics --- 3 packets transmitted, 3 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 35.124/37.172/40.412/2.318 ms -
And now?
-
reinstall squid3 and see if that resolves the issue. i'm wondering if a folder wasn't created to store the av db
-
That did not help.
$ freshclam ClamAV update process started at Fri Jan 30 23:32:23 2015 WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.98.5 Recommended version: 0.98.6 DON'T PANIC! Read http://www.clamav.net/support/faq ERROR: Can't download main.cvd from database.clamav.net Giving up on database.clamav.net... Update failed. Your network may be down or none of the mirrors listed in /usr/local/etc/freshclam.conf is working. -
Check first if there is another freshclam process running before trying to execute another one.
Look foe other squid 3 threads on 2.2. I've posted a really step by step guide to get it working on 64bits version.
-
I already saw that other threads.
Now i had this:
/var: write failed, filesystem is full getfile: Can't write 8192 bytes to /var/db/clamav/clamav-2786ca6469a9b9aafef1622f0f0f13be.tmp/clamav-f58a45f6084309de3a81938d410d397b.tmp WARNING: Can't download main.cvd from database.clamav.netAfter i saw the FULL i disabled "Use RAM Disks" and ClamAV works now.
But the squidGuard service still does not start. -
why were you using a ram disk? I can see using it if your using pfSense without any packages… Once you add packages, you need /var to not disappear
anything in the log for squidguard? Which version did you install?
/var/squid/logs/cache.log
/var/squidGuard/log -
-
why were you using a ram disk?
RAM is faster and takes stress away from the disk.
I increased the ram disk and thought after the virus definitions are now there i can turn ram disk
on again. But when i do that clamd does not start.anything in the log for squidguard? Which version did you install?
squidGuard-squid3 1.4_7 pkg v.1.9.6
squidGuard/log is empty.
Here is some stuff from squid/logs/cache.log:
Shared object "libldap-2.4.so.2" not found, required by "squidGuard" 2015/01/31 13:50:37 kid1| WARNING: redirector #Hlpr0 exited Shared object "libldap-2.4.so.2" not found, required by "squidGuard" 2015/01/31 13:50:37 kid1| Warning: empty ACL: acl throttle_exts urlpath_regex -i "/var/squid/acl/throttle_exts.acl" Shared object "libldap-2.4.so.2" not found, required by "squidGuard" Shared object "libldap-2.4.so.2" not found, required by "squidGuard" 2015/01/31 13:50:37| pinger: Initialising ICMP pinger ... 2015/01/31 13:50:37| icmp_sock: (1) Operation not permitted 2015/01/31 13:50:37| pinger: Unable to start ICMP pinger. 2015/01/31 13:50:37| icmp_sock: (1) Operation not permitted 2015/01/31 13:50:37| pinger: Unable to start ICMPv6 pinger. 2015/01/31 13:50:37| FATAL: pinger: Unable to open any ICMP sockets. Shared object "libldap-2.4.so.2" not found, required by "squidGuard" Shared object "libldap-2.4.so.2" not found, required by "squidGuard" 2015/01/31 13:50:40 kid1| Warning: empty ACL: acl throttle_exts urlpath_regex -i "/var/squid/acl/throttle_exts.acl" 2015/01/31 13:50:40| pinger: Initialising ICMP pinger ... 2015/01/31 13:50:40| icmp_sock: (1) Operation not permitted 2015/01/31 13:50:40| pinger: Unable to start ICMP pinger. 2015/01/31 13:50:40| icmp_sock: (1) Operation not permitted 2015/01/31 13:50:40| pinger: Unable to start ICMPv6 pinger. 2015/01/31 13:50:40| FATAL: pinger: Unable to open any ICMP sockets. 2015/01/31 13:50:47 kid1| Warning: empty ACL: acl throttle_exts urlpath_regex -i "/var/squid/acl/throttle_exts.acl" 2015/01/31 13:50:47| pinger: Initialising ICMP pinger ... 2015/01/31 13:50:47| icmp_sock: (1) Operation not permitted 2015/01/31 13:50:47| pinger: Unable to start ICMP pinger. 2015/01/31 13:50:47| icmp_sock: (1) Operation not permitted 2015/01/31 13:50:47| pinger: Unable to start ICMPv6 pinger. 2015/01/31 13:50:47| FATAL: pinger: Unable to open any ICMP sockets. FATAL: Received Segment Violation...dying. CPU Usage: 659.029 seconds = 69.054 user + 589.975 sys Maximum Resident Size: 154112 KB Page faults with physical i/o: 12 2015/01/31 14:01:45 kid1| Starting Squid Cache version 3.4.10 for amd64-portbld-freebsd10.1... 2015/01/31 14:01:45| pinger: Initialising ICMP pinger ... 2015/01/31 14:01:45| icmp_sock: (1) Operation not permitted 2015/01/31 14:01:45| pinger: Unable to start ICMP pinger. 2015/01/31 14:01:45| icmp_sock: (1) Operation not permitted 2015/01/31 14:01:45| pinger: Unable to start ICMPv6 pinger. 2015/01/31 14:01:45| FATAL: pinger: Unable to open any ICMP sockets. 2015/01/31 16:38:35 kid1| Starting Squid Cache version 3.4.10 for amd64-portbld-freebsd10.1... 2015/01/31 16:38:36| pinger: Initialising ICMP pinger ... 2015/01/31 16:38:36| icmp_sock: (1) Operation not permitted 2015/01/31 16:38:36| pinger: Unable to start ICMP pinger. 2015/01/31 16:38:36| icmp_sock: (1) Operation not permitted 2015/01/31 16:38:36| pinger: Unable to start ICMPv6 pinger. 2015/01/31 16:38:36| FATAL: pinger: Unable to open any ICMP sockets. 2015/01/31 16:10:32 kid1| Warning: empty ACL: acl throttle_exts urlpath_regex -i "/var/squid/acl/throttle_exts.acl" 2015/01/31 16:10:32| pinger: Initialising ICMP pinger ... 2015/01/31 16:10:32| icmp_sock: (1) Operation not permitted -
I increased the ram disk and thought after the virus definitions are now there i can turn ram disk
on again. But when i do that clamd does not start.They are NOT there any more. Guess why. ::) ::) ::)
Sigh. Someone make the package bail out on install when people configure similar BS.
-
why were you using a ram disk?
RAM is faster and takes stress away from the disk.
I increased the ram disk and thought after the virus definitions are now there i can turn ram disk
on again. But when i do that clamd does not start.If your going to use squid or any package that writes persistent data to /var, dont use ramdisk. It will wipe /var every time you reboot and will make the packages fail to start. You will then have to re-install the packages again every reboot…
For the other issues. If you have searched the forum; you would have found solutions.
In the Squid config page. check 'Disable ICMP' to get rid of the 'FATAL: pinger: Unable to open any ICMP sockets' errors
for squidGuard run the following commands for amd64... (make sure path /usr/pbi/squidguard-squid3-amd64 exist first)
ln -s /usr/pbi/squidguard-squid3-amd64/local/lib/libldap-2.4.so.8 /usr/local/lib/libldap-2.4.so.8 ln -s /usr/pbi/squidguard-squid3-amd64/local/lib/libldap-2.4.so.8 /lib/libldap-2.4.so.8 ln -s /usr/pbi/squidguard-squid3-amd64/local/lib/libdb-4.6.so.0 /usr/local/lib/libdb-4.6.so.0 ln -s /usr/pbi/squidguard-squid3l-amd64/local/lib/libdb-4.6.so.0 /usr/lib/libdb-4.6.so.0After you disable ramdisk, UN-install the packages. Reboot, install the packages.. Run the links for squidguard
-
A search for libldap-2.4.so.2 did return nothing.
After a squid restart and trying to start squidGuart:
FATAL: Received Segment Violation...dying. CPU Usage: 0.163 seconds = 0.112 user + 0.052 sys Maximum Resident Size: 101712 KB Page faults with physical i/o: 0 2015/01/31 17:24:29 kid1| Starting Squid Cache version 3.4.10 for amd64-portbld-freebsd10.1... 2015/01/31 17:24:31 kid1| Starting Squid Cache version 3.4.10 for amd64-portbld-freebsd10.1... 2015/01/31 17:25:47 kid1| Warning: empty ACL: acl throttle_exts urlpath_regex -i "/var/squid/acl/throttle_exts.acl" 2015/01/31 17:25:49 kid1| Warning: empty ACL: acl throttle_exts urlpath_regex -i "/var/squid/acl/throttle_exts.acl" 2015/01/31 17:26:02 kid1| Warning: empty ACL: acl throttle_exts urlpath_regex -i "/var/squid/acl/throttle_exts.acl" 2015/01/31 17:26:06 kid1| Warning: empty ACL: acl throttle_exts urlpath_regex -i "/var/squid/acl/throttle_exts.acl" FATAL: Received Segment Violation...dying. CPU Usage: 0.250 seconds = 0.194 user + 0.057 sys Maximum Resident Size: 103280 KB Page faults with physical i/o: 0 2015/01/31 17:26:31 kid1| Starting Squid Cache version 3.4.10 for amd64-portbld-freebsd10.1... 2015/01/31 17:26:33 kid1| Starting Squid Cache version 3.4.10 for amd64-portbld-freebsd10.1...But squidGuard service status is still stopped.
-
What error you get in your browser?
-
Error in the browser?
I did not setup a blacklist yet cause the service is not running.
I can surf the web normally if i point the browser to wpad.mydomain.net/wpad.dat -
It's not running because it segfaults…
FATAL: Received Segment Violation...dying.Are you still running this from ramdisk?
-
Are you still running this from ramdisk?
No
I thought thats the normal message if you restart squid -
Ok, after subscription to squidblacklist.org and this tutorial http://www.legoclan.com/tutorials/#squidblacklist squidGuard is running.
Reason for Squid and SquidGuard for me was:
1. That i thought i can speed up websites if i block ads before they reach the clients.
But it seems that Adblock Plus works better.2. Block ads and tracking for devices like phones, TVs, consoles…
3. Virus protection for phones, TVs, consoles...
But ClamAV really makes websites slow.I run pfSense in Hyper-V 2012 R2 Core on a 3.6GHz Core i3-4160 and assigned 2GB to pfSense.
I did set:
Squid Memory cache size: 512
Squid Maximum object size in RAM: 128Hard disk cache is off cause i was reading it does not help if you have fast internet and not much clients (5-10).
I have a 120 MBit/s internet connection and maybe upgrade to 200.
It would be nice to block:
Virus, Botnet, Malware, Adware, APT, Drive-By Download, Infectious, Espionage, hosts that perform IP tracking for media companies and associations like RIAA/MPAAAd the moment i use Malicious, Proxies and the USG Blacklist from squidblacklist.org
Would be nice to to experience how other handle that stuff.
-
Did you tried any changes on clamav/icap configuration, like improving exclusion, etc?
-
Ok, step by step.
I have the problems with the clwarn.cgi.
First i changed redirect to:https://192.168.0.1/clwarn.cgias it was suggested. But it's https so i need to accept the non trusted side in Firefox.
Can i use http?Then my clwarn.cgi is just an empty side?
Next thing is that i get a Squid error site if a URL does not longer exist.
Is it possible to show the defaults browser page?
Or does it have advantages to see a Squid site in such a case?Read Error The system returned: (54) Connection reset by peer
