Problems with captiveportal after upgrading to 2.2
-
Captive portal databases.
You move to another folder instead of deleting it if you prefer.ok I've copied all files captiveportal***.db and then deleted.
These are the logs:
Jan 31 19:20:05 logportalauth[95869]: Zone: cpzone - Reconfiguring captive portal().
Jan 31 19:20:27 check_reload_status: Reloading filter
Jan 31 19:20:05 check_reload_status: Syncing firewall
and this lighttpd[89587]: (server.c.1558) server stopped by UID = 0 PID = 27770But it seems not working yet…
-
Did you disabled/enabled the service after removing the database files?
-
Did you disabled/enabled the service after removing the database files?
yes done! it doesn't work.
-
Well, I have it working. You need somebody else experience with 2.1 to 2.2 captive portal migration.
Postfix package will have similar issues but I'm writing a guide for package migration when pbi binaries get working…
-
No problems with migration here… (If you cannot get it working, a clean install and config restore takes minutes.)
-
No problems with migration here… (If you cannot get it working, a clean install and config restore takes minutes.)
a clean install of 2.1.5 or 2.2?
-
Up to you, though 2.1 is pretty much a dead end.
-
Up to you, though 2.1 is pretty much a dead end.
I will try a clean install of 2.2 on another machine.
-
No problems with migration here… (If you cannot get it working, a clean install and config restore takes minutes.)
Minutes??? I've tried to reinstall pfsense n times and it doesn't work. After restore I get mismatch error and I've tried but I am not able to set the right interfaces.
I don't understand. Error in the backup file? -
You won't have much luck with restoring 2.2 configuration backup on 2.1.x
-
You won't have much luck with restoring 2.2 configuration backup on 2.1.x
no the backup was of the 2.1.5 and I've tried it on 2.1.5 and also on 2.2.
I will throw out of the window the pc!!! -
Nice rant. Post the exact errors you get and explain what does "I am not able to set the right interfaces" mean.
-
Nice rant. Post the exact errors you get and explain what does "I am not able to set the right interfaces" mean.
It's difficult to explain. If I can arrive to the web gui and I can apply the restore I think I am at a good point…
Anyway I get Network interface mismatch. I've tried to associate the interfaces to the correct wan,lan,...but when I apply and reboot it doesn't work anything and I cannot access to pfsense anymore.
And after the restore, I get login error. It seems password doesn't work! -
How old is that configuration backup? Does it even come from the same machine?
-
How old is that configuration backup? Does it even come from the same machine?
two days ago but it's from my original pfsense. I've tried to use it on another machine that I've reinstalled.
-
Uh? Wondering why it does not match? Sounds like another Layer 8 error.
-
Uh? Wondering why it does not match? Sounds like another Layer 8 error.
very funny :D
ok the problem it could be me…anyway I cannot realize how to solve it!
I try to explain. I have 3 interface wan, lan and opt. In the new machine 3 ethernet cards sge0, re0,re1. I've checked which one it is physically.
I connected the right cable connected to the previous pfsense to the right new interface.
What's more? :-\ -
Why on earth don't you go, reinstall the SAME box the backup came from and restore the configuration backup on the SAME box? Sorry, I don't have time for similar nonsense.
-
Ahhhhh - Now I get you…
-
If you are trying to restore a backup from different hardware machines, you may need to fix interface name changes or configure network again after restore config reboot (via serial I guess on nano/cf installs)
