Quagga OSPF: routing priority does not work
-
Good day
I have a central site and several branch sites that are connected to it via OpenVPN tunnels. Branch sites can only see the central site, not each other. I have set up dynamic routing with Quagga OSPF. The central site has priority = 255, Branch sites = 1 (the default). In the calculation of the routing table, one of the branch sites becomes DR, resulting in the routing table gets only this site. Setting router
s priority = 0 from web interface does not work, it still remains = 1\. Addition of "IP OSPF PRIORITY = 0" to the branch router
s Qagga config solves the problem only until the router reboots or VPN tunnel goes off.
Is there a way to resolve this issue?