WAN link going down
-
I'll check this when i get home, i also see inthe gateway logs that apinger couldn't get the gateway.
But that is probably cause and effect, if the link is down then the gateway can't be located.Thank in advance steve !
-
Nope, i can't see any problems in the boot log.
I'm also not using the modified sk(4) drivers, it's just a default installationCopyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-RELEASE-p4 #0 36d7dec(releng/10.1)-dirty: Thu Jan 22 15:12:38 CST 2015 root@pfsense-22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_SMP.10 i386 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Pentium(R) M processor 2.00GHz (2000.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Family = 0x6 Model = 0xd Stepping = 8 Features=0xafe9fbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,tm,pbe>Features2=0x180 <est,tm2>AMD Features=0x100000 <nx>real memory = 2139029504 (2039 MB) avail memory = 2064244736 (1968 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <intelr awrdacpi="">ioapic0 <version 2.0="">irqs 0-23 on motherboard wlan: mac acl policy registered kbd1 at kbdmux0 random: <software, yarrow="">initialized cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. acpi0: <intelr awrdacpi="">on motherboard acpi0: Power Button (fixed) acpi0: reservation of a2, 1e (4) failed acpi0: reservation of e0, 10 (4) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7f6f0000 (3) failed cpu0: <acpi cpu="">on acpi0 attimer0: <at timer="">port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <at realtime="" clock="">port 0x70-0x73 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: <power button="">on acpi0 pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus="">on pcib0 vgapci0: <vga-compatible display="">port 0xea00-0xea07 mem 0xd0500000-0xd057ffff,0xc0000000-0xcfffffff,0xd0580000-0xd05bffff irq 16 at device 2.0 on pci0 agp0: <intel 82915gm="" (915gm="" gmch)="" svga="" controller="">on vgapci0 agp0: aperture size is 256M, detected 7932k stolen memory vgapci0: Boot video device pcib1: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0 pci1: <acpi pci="" bus="">on pcib1 mskc0: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x8000-0x80ff mem 0xd0020000-0xd0023fff irq 16 at device 0.0 on pci1 msk0: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc0 miibus0: <mii bus="">on msk0 e1000phy0: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow pcib2: <acpi pci-pci="" bridge="">irq 17 at device 28.1 on pci0 pci2: <acpi pci="" bus="">on pcib2 mskc1: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x9000-0x90ff mem 0xd0120000-0xd0123fff irq 17 at device 0.0 on pci2 msk1: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc1 miibus1: <mii bus="">on msk1 e1000phy1: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus1 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow pcib3: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0 pci3: <acpi pci="" bus="">on pcib3 mskc2: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0xa000-0xa0ff mem 0xd0220000-0xd0223fff irq 18 at device 0.0 on pci3 msk2: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc2 miibus2: <mii bus="">on msk2 e1000phy2: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus2 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow pcib4: <acpi pci-pci="" bridge="">irq 19 at device 28.3 on pci0 pci4: <acpi pci="" bus="">on pcib4 mskc3: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0xb000-0xb0ff mem 0xd0320000-0xd0323fff irq 19 at device 0.0 on pci4 msk3: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc3 miibus3: <mii bus="">on msk3 e1000phy3: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus3 e1000phy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow uhci0: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-a="">port 0xeb00-0xeb1f irq 23 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-b="">port 0xed00-0xed1f irq 19 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-c="">port 0xe800-0xe81f irq 18 at device 29.2 on pci0 usbus2 on uhci2 uhci3: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-d="">port 0xe900-0xe91f irq 16 at device 29.3 on pci0 usbus3 on uhci3 ehci0: <intel 82801fb="" (ich6)="" usb="" 2.0="" controller="">mem 0xd05c0000-0xd05c03ff irq 23 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 pcib5: <acpi pci-pci="" bridge="">at device 30.0 on pci0 pci5: <acpi pci="" bus="">on pcib5 skc0: <marvell gigabit="" ethernet="">port 0xc000-0xc0ff mem 0xd042c000-0xd042ffff irq 16 at device 0.0 on pci5 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <marvell semiconductor,="" inc.="" yukon="">on skc0 miibus4: <mii bus="">on sk0 e1000phy4: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus4 e1000phy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc1: <marvell gigabit="" ethernet="">port 0xc400-0xc4ff mem 0xd0420000-0xd0423fff irq 17 at device 1.0 on pci5 skc1: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk1: <marvell semiconductor,="" inc.="" yukon="">on skc1 miibus5: <mii bus="">on sk1 e1000phy5: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus5 e1000phy5: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc2: <marvell gigabit="" ethernet="">port 0xc800-0xc8ff mem 0xd0424000-0xd0427fff irq 18 at device 2.0 on pci5 skc2: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk2: <marvell semiconductor,="" inc.="" yukon="">on skc2 miibus6: <mii bus="">on sk2 e1000phy6: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus6 e1000phy6: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto skc3: <marvell gigabit="" ethernet="">port 0xcc00-0xccff mem 0xd0428000-0xd042bfff irq 19 at device 3.0 on pci5 skc3: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk3: <marvell semiconductor,="" inc.="" yukon="">on skc3 miibus7: <mii bus="">on sk3 e1000phy7: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus7 e1000phy7: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto pci5: <encrypt decrypt,="" network="" computer="" crypto="">at device 4.0 (no driver attached) isab0: <pci-isa bridge="">at device 31.0 on pci0 isa0: <isa bus="">on isab0 atapci0: <intel ich6="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0 ata0: <ata channel="">at channel 0 on atapci0 ata1: <ata channel="">at channel 1 on atapci0 acpi_tz0: <thermal zone="">on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77b irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <parallel port="" bus="">on ppc0 lpt0: <printer>on ppbus0 lpt0: Interrupt-driven port ppi0: <parallel i="" o="">on ppbus0 pmtimer0 on isa0 orm0: <isa option="" rom="">at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0 sc0: <system console="">at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] est0: <enhanced speedstep="" frequency="" control="">on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6120f2906000f29 device_attach: est0 attach returned 6 p4tcc0: <cpu frequency="" thermal="" control="">on cpu0 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 ugen0.1: <intel>at usbus0 uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0 ugen1.1: <intel>at usbus1 uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1 ugen2.1: <intel>at usbus2 uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2 ugen3.1: <intel>at usbus3 uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3 usbus4: 480Mbps High Speed USB v2.0 ugen4.1: <intel>at usbus4 uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4 ata0: DMA limited to UDMA33, controller found non-ATA66 cable ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <wdc wd800beve-00uyt0="" 01.04a01="">ATA-7 device ada0: Serial Number WD-WXEX08TJ6328 ada0: 33.300MB/s transfers (UDMA2, PIO 8192bytes) ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 Timecounter "TSC" frequency 2000113799 Hz quality 800 Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered Root mount waiting for: usbus4 Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/ad0s1a [rw]...</wdc></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></at></keyboard></generic></system></isa></parallel></printer></parallel></parallel></thermal></ata></ata></intel></isa></pci-isa></encrypt></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></acpi></acpi></intel></intel></intel></intel></intel></marvell></mii></marvell></marvell></acpi></acpi></marvell></mii></marvell></marvell></acpi></acpi></marvell></mii></marvell></marvell></acpi></acpi></marvell></mii></marvell></marvell></acpi></acpi></intel></vga-compatible></acpi></acpi></power></at></at></acpi></intelr></software></software,></version></intelr></nx></est,tm2></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,tm,pbe> -
That's good because I'm not sure there's much we can do with the drivers! ;)
Try disabling apinger for the gateway in System > Routing, edit gateway.
In 2.2 there is an option to get more info from apinger by enabling 'gateway monitoring debug logging' in System > Advanced, Miscellaneous tab. Try that if disabling apinger makes any difference.
Steve
-
That's good because I'm not sure there's much we can do with the drivers! ;)
Try disabling apinger for the gateway in System > Routing, edit gateway.
In 2.2 there is an option to get more info from apinger by enabling 'gateway monitoring debug logging' in System > Advanced, Miscellaneous tab. Try that if disabling apinger makes any difference.
Steve
Ok ;D
I'll try disabling apinger first and see how it goes the next days.
Its happens always after the Firewall is online for 2 days.Greetz
Tim -
Ow yeah, I'm also getting these messages…
On a disabled interface and no cable plugged in.They are on the same interface card though (sk..)
I only use sk0 and sk1 for now.Feb 3 18:02:08 php-fpm[61051]: /rc.linkup: Linkup detected on disabled interface...Ignoring Feb 3 18:02:08 php-fpm[61051]: /rc.linkup: Linkup detected on disabled interface...Ignoring Feb 3 18:02:07 check_reload_status: Linkup starting sk3 Feb 3 18:02:07 kernel: sk3: link state changed to DOWN Feb 3 18:02:07 kernel: sk2: link state changed to DOWN Feb 3 18:02:07 check_reload_status: Linkup starting sk2 -
Is that at any time or just at boot?
-
Is that at any time or just at boot?
At the end of the boot cycle :)
I also see that WOL isn't working anymore.. strange -
WOL is a known x86 issue with a patch on Redmine, completely unrelated.
-
I also see that WOL isn't working anymore.. strange
I guess you are using 32-bit pfSense 2.2 - that is effected by the gen_subnetv4_max issue, fixed by:
https://github.com/pfsense/pfsense/commit/7094c303b7d46c9f7b24c3f1bd4432187832e85cThings that try to calculate the max IP address of a subnet are effected - WOL is one of them.
You can apply that small fix and WOL should work again.
-
I also see that WOL isn't working anymore.. strange
I guess you are using 32-bit pfSense 2.2 - that is effected by the gen_subnetv4_max issue, fixed by:
https://github.com/pfsense/pfsense/commit/7094c303b7d46c9f7b24c3f1bd4432187832e85cThings that try to calculate the max IP address of a subnet are effected - WOL is one of them.
You can apply that small fix and WOL should work again.
Thank you !
I was guessing in that direction, because when using WOL in the terminal it worked :) -
Spoke too soon.
The WAN link is still losing its connection.
Feb 4 13:37:17 kernel: arpresolve: can't allocate llinfo for 84.192.192.1 on sk0 Feb 4 13:37:17 kernel: arpresolve: can't allocate llinfo for 84.192.192.1 on sk0 Feb 4 13:37:13 kernel: arpresolve: can't allocate llinfo for 84.192.192.1 on sk0 Feb 4 13:37:06 php-fpm[5814]: /rc.linkup: DEVD Ethernet detached event for wan Feb 4 13:37:05 kernel: sk0: link state changed to DOWN Feb 4 13:37:05 check_reload_status: Linkup starting sk0 Feb 4 13:36:10 php-fpm[26356]: /rc.filter_configure_sync: Could not find IPv6 gateway for interface (wan). Feb 4 13:36:08 check_reload_status: Reloading filter Feb 4 13:36:08 php-fpm[26356]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.1.254) (interface: LAN[lan]) (real interface: sk1). Feb 4 13:36:08 php-fpm[26356]: /rc.newwanip: rc.newwanip: Info: starting on sk1. Feb 4 13:36:07 check_reload_status: rc.newwanip starting sk1 Feb 4 13:36:07 php-fpm[26356]: /rc.linkup: Hotplug event detected for LAN(lan) but ignoring since interface is configured with static IP (192.168.1.254 ) Feb 4 13:36:06 kernel: sk1: link state changed to UP Feb 4 13:36:06 check_reload_status: Linkup starting sk1 Feb 4 13:36:01 php-fpm[26356]: /rc.linkup: Hotplug event detected for LAN(lan) but ignoring since interface is configured with static IP (192.168.1.254 ) Feb 4 13:36:00 kernel: sk1: link state changed to DOWNFirewall Logs
block/1000000104 Feb 4 13:40:18 Direction=OUT lo0 Default deny rule IPv4 (1000000104) Icon Reverse Resolve with DNS Icon Easy Rule: Add to Block List 74.125.24.139:80 Icon Reverse Resolve with DNS Icon Easy Rule: Pass this traffic 84.192.215.xxx:46001 TCP:FA block/1000000104 Feb 4 13:40:18 Direction=OUT lo0 Default deny rule IPv4 (1000000104) Icon Reverse Resolve with DNS Icon Easy Rule: Add to Block List 74.125.24.139:80 Icon Reverse Resolve with DNS Icon Easy Rule: Pass this traffic 84.192.215.xxx:46001 TCP:FA block/1000000104 Feb 4 13:40:17 Direction=OUT lo0 Default deny rule IPv4 (1000000104) Icon Reverse Resolve with DNS Icon Easy Rule: Add to Block List 74.125.24.139:80 Icon Reverse Resolve with DNS Icon Easy Rule: Pass this traffic 84.192.215.xxx:46001 TCP:FA pass/1422181121 Feb 4 13:24:22 ovpns1 USER_RULE OpenVPN OpenVPN Server wizard (1422181121) Icon Reverse Resolve with DNS Icon Easy Rule: Add to Block List 192.168.10.10 Icon Reverse Resolve with DNS Icon Easy Rule: Pass this traffic 192.168.1.120 ICMP pass/1422181121 Feb 4 13:24:11 ovpns1 USER_RULE OpenVPN OpenVPN Server wizard (1422181121) Icon Reverse Resolve with DNS Icon Easy Rule: Add to Block List 192.168.10.10:55720 Icon Reverse Resolve with DNS Icon Easy Rule: Pass this traffic 192.168.1.254:443 TCP:S -
I don't know if there is a relation , but tonight i noticed something strange in the logs.
My WAN ip changed to a private range… (twice)
I'm also seeing openvpn and LCDProc errors...wtf !
Feb 11 01:10:30 fw1 snort[39066]: invalid appid in appStatRecord (186) Feb 11 01:28:21 fw1 check_reload_status: updating dyndns WAN_DHCP Feb 11 01:28:21 fw1 check_reload_status: Restarting ipsec tunnels Feb 11 01:28:21 fw1 check_reload_status: Restarting OpenVPN tunnels/interfaces Feb 11 01:28:21 fw1 check_reload_status: Reloading filter Feb 11 01:28:22 fw1 php-fpm[89141]: /rc.dyndns.update: phpDynDNS (***-ip.biz): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry. Feb 11 01:28:22 fw1 php-fpm[76014]: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use WAN_DHCP. Feb 11 01:28:22 fw1 php-fpm[76014]: /rc.openvpn: OpenVPN: Resync server1 OpenVPN Server Feb 11 01:28:22 fw1 kernel: ovpns1: link state changed to DOWN Feb 11 01:28:22 fw1 check_reload_status: Reloading filter Feb 11 01:28:23 fw1 kernel: ovpns1: link state changed to UP Feb 11 01:28:23 fw1 check_reload_status: rc.newwanip starting ovpns1 Feb 11 01:28:24 fw1 php-fpm[89141]: /rc.newwanip: rc.newwanip: Info: starting on ovpns1. Feb 11 01:28:24 fw1 php-fpm[89141]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: []) (real interface: ovpns1). Feb 11 01:28:24 fw1 check_reload_status: Reloading filter Feb 11 01:28:24 fw1 php-fpm[89141]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - -> 192.168.10.1 - Restarting packages. Feb 11 01:28:24 fw1 check_reload_status: Starting packages Feb 11 01:28:24 fw1 php-fpm[76014]: /rc.filter_configure_sync: Could not find IPv6 gateway for interface (wan). Feb 11 01:28:25 fw1 php-fpm[89141]: /rc.start_packages: Restarting/Starting all packages. Feb 11 01:28:25 fw1 php-fpm[89141]: /rc.start_packages: Reloading Squid for configuration sync Feb 11 01:28:26 fw1 check_reload_status: Syncing firewall Feb 11 01:28:26 fw1 check_reload_status: Syncing firewall Feb 11 01:28:27 fw1 php-fpm[79907]: /rc.filter_configure_sync: Could not find IPv6 gateway for interface (wan). Feb 11 01:28:28 fw1 php: lcdproc: Start client procedure. Error counter: (0) Feb 11 01:28:39 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 01:28:39 fw1 php: lcdproc: Start client procedure. Error counter: (1) Feb 11 01:28:50 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 01:28:50 fw1 php: lcdproc: Start client procedure. Error counter: (2) Feb 11 01:29:01 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 01:29:01 fw1 php: lcdproc: Start client procedure. Error counter: (3) Feb 11 01:29:12 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 01:29:12 fw1 php: lcdproc: Too many errors, the client ends. Feb 11 01:33:20 fw1 kernel: pid 71053 (ntpd), uid 0: exited on signal 11 (core dumped) Feb 11 01:55:12 fw1 snort[39066]: invalid appid in appStatRecord (498) Feb 11 02:00:31 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30622 milliseconds Feb 11 02:00:31 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:01:17 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30630 milliseconds Feb 11 02:01:17 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:02:03 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30797 milliseconds Feb 11 02:02:03 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:02:49 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30628 milliseconds Feb 11 02:02:49 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:03:04 fw1 php: snort_check_for_rule_updates.php: File 'snortrules-snapshot-2970.tar.gz.md5' download attempts: 4 ... Feb 11 02:03:04 fw1 php: snort_check_for_rule_updates.php: [Snort] Snort VRT rules md5 download failed... Feb 11 02:03:04 fw1 php: snort_check_for_rule_updates.php: [Snort] Server returned error code 0... Feb 11 02:03:34 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30759 milliseconds Feb 11 02:03:34 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:04:20 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30773 milliseconds Feb 11 02:04:20 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:05:06 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30740 milliseconds Feb 11 02:05:06 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:05:52 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30696 milliseconds Feb 11 02:05:52 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:06:07 fw1 php: snort_check_for_rule_updates.php: File 'snort-openappid.tar.gz.md5' download attempts: 4 ... Feb 11 02:06:07 fw1 php: snort_check_for_rule_updates.php: [Snort] Snort OpenAppID detectors md5 download failed... Feb 11 02:06:07 fw1 php: snort_check_for_rule_updates.php: [Snort] Server returned error code 0... Feb 11 02:06:37 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30597 milliseconds Feb 11 02:06:37 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:07:23 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30771 milliseconds Feb 11 02:07:23 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:08:09 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30889 milliseconds Feb 11 02:08:09 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:08:54 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30633 milliseconds Feb 11 02:08:54 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:09:09 fw1 php: snort_check_for_rule_updates.php: File 'community-rules.tar.gz.md5' download attempts: 4 ... Feb 11 02:09:09 fw1 php: snort_check_for_rule_updates.php: [Snort] Snort GPLv2 Community Rules md5 download failed... Feb 11 02:09:09 fw1 php: snort_check_for_rule_updates.php: [Snort] Server returned error code 0... Feb 11 02:09:40 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30721 milliseconds Feb 11 02:09:40 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:10:26 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30805 milliseconds Feb 11 02:10:26 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:11:12 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30806 milliseconds Feb 11 02:11:12 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:11:58 fw1 php: snort_check_for_rule_updates.php: [Snort] Rules download error: Resolving timed out after 30717 milliseconds Feb 11 02:11:58 fw1 php: snort_check_for_rule_updates.php: [Snort] Will retry in 15 seconds... Feb 11 02:12:13 fw1 php: snort_check_for_rule_updates.php: File 'emerging.rules.tar.gz.md5' download attempts: 4 ... Feb 11 02:12:13 fw1 php: snort_check_for_rule_updates.php: [Snort] Emerging Threats Open rules md5 download failed... Feb 11 02:12:13 fw1 php: snort_check_for_rule_updates.php: [Snort] Server returned error code 0... Feb 11 02:12:13 fw1 php: snort_check_for_rule_updates.php: [Snort] The Rules update has finished. Feb 11 02:12:13 fw1 check_reload_status: Syncing firewall Feb 11 02:12:14 fw1 kernel: pid 65763 (php), uid 0: exited on signal 11 (core dumped) Feb 11 02:13:09 fw1 check_reload_status: rc.newwanip starting sk0 Feb 11 02:13:10 fw1 php-fpm[87333]: /rc.newwanip: rc.newwanip: Info: starting on sk0. Feb 11 02:13:10 fw1 php-fpm[87333]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.100.10) (interface: WAN[wan]) (real interface: sk0). Feb 11 02:13:10 fw1 php-fpm[87333]: /rc.newwanip: IP has changed, killing states on former IP 84.192.***.***. Feb 11 02:13:11 fw1 php-fpm[87333]: /rc.newwanip: Could not find IPv6 gateway for interface (wan). Feb 11 02:13:12 fw1 php-fpm[87333]: /rc.newwanip: ROUTING: setting default route to 192.168.100.1 Feb 11 02:13:12 fw1 php-fpm[87333]: /rc.newwanip: Removing static route for monitor 84.192.***.***and adding a new route through 192.168.100.1 Feb 11 02:13:32 fw1 check_reload_status: updating dyndns WAN_DHCP Feb 11 02:13:32 fw1 check_reload_status: Restarting ipsec tunnels Feb 11 02:13:32 fw1 check_reload_status: Restarting OpenVPN tunnels/interfaces Feb 11 02:13:32 fw1 check_reload_status: Reloading filter Feb 11 02:13:33 fw1 php-fpm[15216]: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use WAN_DHCP. Feb 11 02:13:33 fw1 php-fpm[15216]: /rc.openvpn: OpenVPN: Resync server1 OpenVPN Server Feb 11 02:13:33 fw1 kernel: ovpns1: link state changed to DOWN Feb 11 02:13:33 fw1 check_reload_status: Reloading filter Feb 11 02:13:34 fw1 kernel: ovpns1: link state changed to UP Feb 11 02:13:34 fw1 check_reload_status: rc.newwanip starting ovpns1 Feb 11 02:13:35 fw1 php-fpm[15216]: /rc.filter_configure_sync: Could not find IPv6 Feb 11 02:13:39 fw1 check_reload_status: Syncing firewall Feb 11 02:13:39 fw1 php-fpm[19772]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: []) (real interface: ovpns1). Feb 11 02:13:39 fw1 check_reload_status: Reloading filter Feb 11 02:13:39 fw1 php-fpm[19772]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - -> 192.168.10.1 - Restarting packages. Feb 11 02:13:39 fw1 check_reload_status: Starting packages Feb 11 02:13:39 fw1 check_reload_status: Syncing firewall Feb 11 02:13:39 fw1 php-fpm[87333]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 84.192.***.***-> 192.168.100.10 - Restarting packages. Feb 11 02:13:40 fw1 php-fpm[70546]: /rc.start_packages: Restarting/Starting all packages. Feb 11 02:13:40 fw1 php-fpm[70546]: /rc.start_packages: Reloading Squid for configuration sync Feb 11 02:13:41 fw1 check_reload_status: Reloading filter Feb 11 02:13:41 fw1 php: lcdproc: Start client procedure. Error counter: (0) Feb 11 02:13:41 fw1 check_reload_status: Syncing firewall Feb 11 02:13:42 fw1 php-fpm[19772]: /rc.filter_configure_sync: Could not find IPv6 gateway for interface (wan). Feb 11 02:13:44 fw1 php-fpm[87333]: /rc.filter_configure_sync: Could not find IPv6 gateway for interface (wan). Feb 11 02:13:44 fw1 php: lcdproc: Start client procedure. Error counter: (0) Feb 11 02:13:55 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 02:13:55 fw1 php: lcdproc: Start client procedure. Error counter: (1) Feb 11 02:14:06 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 02:14:06 fw1 php: lcdproc: Start client procedure. Error counter: (2) Feb 11 02:14:11 fw1 kernel: arpresolve: can't allocate llinfo for 192.168.100.1 on sk0 Feb 11 02:14:12 fw1 kernel: arpresolve: can't allocate llinfo for 192.168.100.1 on sk0 Feb 11 02:14:13 fw1 check_reload_status: rc.newwanip starting sk0 Feb 11 02:14:14 fw1 php-fpm[80275]: /rc.newwanip: rc.newwanip: Info: starting on sk0. Feb 11 02:14:14 fw1 php-fpm[80275]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.100.10) (interface: WAN[wan]) (real interface: sk0). Feb 11 02:14:15 fw1 php-fpm[80275]: /rc.newwanip: Could not find IPv6 gateway for interface (wan). Feb 11 02:14:16 fw1 php-fpm[80275]: /rc.newwanip: ROUTING: setting default route to 192.168.100.1 Feb 11 02:14:16 fw1 php-fpm[80275]: /rc.newwanip: Removing static route for monitor 84.192.***.*** and adding a new route through 192.168.100.1 Feb 11 02:14:17 fw1 php-fpm[80275]: /rc.newwanip: Dyndns debug information (tiet.no-ip.biz): Could not resolve checkip.dyndns.org to IP using interface IP 192.168.100.10. Feb 11 02:14:17 fw1 php-fpm[80275]: /rc.newwanip: DynDNS (*****-ip.biz) There was an error trying to determine the public IP for interface - wan(sk0). Probably interface is not a WAN interface. Feb 11 02:14:17 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 02:14:17 fw1 php: lcdproc: Start client procedure. Error counter: (3) Feb 11 02:14:18 fw1 php-fpm[80275]: /rc.newwanip: Resyncing OpenVPN instances for interface WAN. Feb 11 02:14:18 fw1 kernel: ovpns1: link state changed to DOWN Feb 11 02:14:18 fw1 check_reload_status: Reloading filter Feb 11 02:14:18 fw1 check_reload_status: Reloading filter Feb 11 02:14:18 fw1 php-fpm[80275]: /rc.newwanip: Creating rrd update script Feb 11 02:14:18 fw1 kernel: ovpns1: link state changed to UP Feb 11 02:14:18 fw1 check_reload_status: rc.newwanip starting ovpns1 Feb 11 02:14:20 fw1 php-fpm[35317]: /rc.filter_configure_sync: Could not find IPv6 gateway for interface (wan). Feb 11 02:14:20 fw1 php-fpm[80275]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 192.168.100.10 -> 192.168.100.10 - Restarting packages. Feb 11 02:14:20 fw1 check_reload_status: Starting packages Feb 11 02:14:20 fw1 php-fpm[80275]: /rc.newwanip: rc.newwanip: Info: starting on ovpns1. Feb 11 02:14:20 fw1 php-fpm[80275]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: []) (real interface: ovpns1). Feb 11 02:14:20 fw1 check_reload_status: Reloading filter Feb 11 02:14:20 fw1 php-fpm[80275]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - -> 192.168.10.1 - Restarting packages. Feb 11 02:14:20 fw1 check_reload_status: Starting packages Feb 11 02:14:22 fw1 php-fpm[80275]: /rc.start_packages: Restarting/Starting all packages. Feb 11 02:14:22 fw1 php-fpm[35317]: /rc.start_packages: Skipping STARTing packages process because previous/another instance is already running Feb 11 02:14:22 fw1 php-fpm[80275]: /rc.start_packages: Reloading Squid for configuration sync Feb 11 02:14:23 fw1 php-fpm[67206]: /rc.filter_configure_sync: Could not find IPv6 gateway for interface (wan). Feb 11 02:14:23 fw1 check_reload_status: Syncing firewall Feb 11 02:14:23 fw1 check_reload_status: Syncing firewall Feb 11 02:14:25 fw1 php: lcdproc: Start client procedure. Error counter: (0) Feb 11 02:14:36 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 02:14:36 fw1 php: lcdproc: Start client procedure. Error counter: (1) Feb 11 02:14:47 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 02:14:47 fw1 php: lcdproc: Start client procedure. Error counter: (2) Feb 11 02:14:58 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 02:14:58 fw1 php: lcdproc: Start client procedure. Error counter: (3) Feb 11 02:15:09 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 02:15:09 fw1 php: lcdproc: Too many errors, the client ends. Feb 11 02:15:14 fw1 kernel: arpresolve: can't allocate llinfo for 192.168.100.1 on sk0 Feb 11 02:15:15 fw1 kernel: arpresolve: can't allocate llinfo for 192.168.100.1 on sk0 Feb 11 02:15:16 fw1 kernel: arpresolve: can't allocate llinfo for 192.168.100.1 on sk0 Feb 11 02:15:17 fw1 kernel: arpresolve: can't allocate llinfo for 192.168.100.1 on sk0 Feb 11 02:15:18 fw1 kernel: arpresolve: can't allocate llinfo for 192.168.100.1 on sk0 Feb 11 02:15:19 fw1 kernel: arpresolve: can't allocate llinfo for 192.168.100.1 on sk0 Feb 11 02:15:20 fw1 kernel: arpresolve: can't allocate llinfo for 192.168.100.1 on sk0 Feb 11 02:15:20 fw1 check_reload_status: rc.newwanip starting sk0 Feb 11 02:15:21 fw1 kernel: arpresolve: can't allocate llinfo for 192.168.100.1 on sk0 Feb 11 02:15:21 fw1 php-fpm[67206]: /rc.newwanip: rc.newwanip: Info: starting on sk0. Feb 11 02:15:21 fw1 php-fpm[67206]: /rc.newwanip: rc.newwanip: on (IP address: 84.192.***.***) (interface: WAN[wan]) (real interface: sk0). Feb 11 02:15:21 fw1 php-fpm[67206]: /rc.newwanip: IP has changed, killing states on former IP 192.168.100.10. Feb 11 02:15:23 fw1 php-fpm[67206]: /rc.newwanip: Could not find IPv6 gateway for interface (wan). Feb 11 02:15:23 fw1 php-fpm[67206]: /rc.newwanip: ROUTING: setting default route to 84.192.***.*** Feb 11 02:15:25 fw1 php-fpm[67206]: /rc.newwanip: phpDynDNS (*****-ip.biz): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry. Feb 11 02:15:26 fw1 php-fpm[67206]: /rc.newwanip: Resyncing OpenVPN instances for interface WAN. Feb 11 02:15:26 fw1 kernel: ovpns1: link state changed to DOWN Feb 11 02:15:26 fw1 check_reload_status: Reloading filter Feb 11 02:15:26 fw1 check_reload_status: Reloading filter Feb 11 02:15:26 fw1 php-fpm[67206]: /rc.newwanip: Creating rrd update script Feb 11 02:15:26 fw1 kernel: ovpns1: link state changed to UP Feb 11 02:15:26 fw1 check_reload_status: rc.newwanip starting ovpns1 Feb 11 02:15:28 fw1 php-fpm[56235]: /rc.filter_configure_sync: Could not find IPv6 gateway for interface (wan). Feb 11 02:15:28 fw1 php-fpm[67206]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 192.168.100.10 -> 84.192.***.*** - Restarting packages. Feb 11 02:15:28 fw1 check_reload_status: Starting packages Feb 11 02:15:28 fw1 php-fpm[67206]: /rc.newwanip: rc.newwanip: Info: starting on ovpns1. Feb 11 02:15:28 fw1 php-fpm[67206]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.1) (interface: []) (real interface: ovpns1). Feb 11 02:15:28 fw1 check_reload_status: Reloading filter Feb 11 02:15:28 fw1 php-fpm[67206]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - -> 192.168.10.1 - Restarting packages. Feb 11 02:15:28 fw1 check_reload_status: Starting packages Feb 11 02:15:29 fw1 php-fpm[67206]: /rc.start_packages: Restarting/Starting all packages. Feb 11 02:15:29 fw1 php-fpm[56235]: /rc.start_packages: Skipping STARTing packages process because previous/another instance is already running Feb 11 02:15:30 fw1 php-fpm[67206]: /rc.start_packages: Reloading Squid for configuration sync Feb 11 02:15:30 fw1 php-fpm[86166]: /rc.filter_configure_sync: Could not find IPv6 gateway for interface (wan). Feb 11 02:15:31 fw1 check_reload_status: Syncing firewall Feb 11 02:15:31 fw1 check_reload_status: Syncing firewall Feb 11 02:15:32 fw1 php: lcdproc: Start client procedure. Error counter: (0) Feb 11 02:15:43 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 02:15:43 fw1 php: lcdproc: Start client procedure. Error counter: (1) Feb 11 02:15:54 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 02:15:54 fw1 php: lcdproc: Start client procedure. Error counter: (2) Feb 11 02:16:05 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 02:16:05 fw1 php: lcdproc: Start client procedure. Error counter: (3) Feb 11 02:16:16 fw1 php: lcdproc: Failed to connect to LCDd process Operation timed out (60) Feb 11 02:16:16 fw1 php: lcdproc: Too many errors, the client ends. Feb 11 07:04:06 fw1 php-fpm[73586]: /index.php: Session timed out for user 'admin' -
A private IP on your WAN is usually caused by a cable modem that's lost its upstream connection. Could that be happening here. Is the private address being assigned in any of your internal subnets?
Steve
-
Is your modem rebooting? That might explain both symptoms.
-
Don't know , but that makes sense in a way… :)
On the other hand it's giving me 2 different IP's. -
You mean 192.168.10.1 and 192.168.100.10?
You aren't using either of those subnets (/24) internally?Steve
-
Nope :-)
The 192.168.10.0/24 range is used by openvpn for vpn access
-
Ok, so you could have something handing out address in that subnet. The 100.1 address is totally spurious, not used as a tunnel address etc?
Steve
-
Nope not used.
But the WAN link seems stable for now.
I made some changes in the System general settings and they seem to work. -
What did you change?
Steve
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.