Vlans on lacp lagg
-
Current setup:
2.2 running on a C2758 1U
igb0 = WAN
igb1 = LAN
igb2&igb3 = lagg0 (as lacp)I have a number of vlan's that I have added to parent interface –> lagg0.
Problem is that it's like the vlan traffic doesn't seem to work when configured through lagg0. If however I configure the vlans to parent interface say igb2 and delete lagg0; it works fine. (Obviously only once instance of 1Gb/s...) To me it seems like vlans over lacp laggs are broken in 2.2.
Before upgrading to 2.2 the 2.1.5 in the same configuration as mentioned above on the same hardware worked perfectly...
Is anyone able to confirm similar difficulties? AND / OR is there a log that I can post that would show more detail as to exactly what may be going wrong?
The switch used is a NetGear GS748Tv4 fw:5.0.2.18 (But I do not believe this to be the problem as its configuration has not changed, only the pfsense 2.2 upgrade. And the pfsense 2.1.5 had been working in this configuration.)
Thanks for your help!
-
This might be related?
-
BINGO!
After doing this the connection came up. As well I went snooping in the switch and updated FW / adjusted strict settings. All good in strict mode now.
Thanks MATE!!!!
++REP
