Need to create a NAT rule for PLEX streaming

johnpoz

you don't have it enabled.. Do you have the disable checkbox.. You can see if the port is open by going to canyouseeme.org and putting in port 80

And you sure don't need UDP…

Why do you want to enable nat reflection? Its pointless and to be honest shouldn't even be an option ;) I would not suggest you do anything with it - if you want to hit his plex server - then go to the 192.168.0.100 address since your on that network already.. Create a dns entry in pfsense for plex.yourwhateverlocal.tld and there you go ;)

TyMac

@johnpoz:

you don't have it enabled.. Do you have the disable checkbox.. You can see if the port is open by going to canyouseeme.org and putting in port 80

And you sure don't need UDP…

Why do you want to enable nat reflection? Its pointless and to be honest shouldn't even be an option ;) I would not suggest you do anything with it - if you want to hit his plex server - then go to the 192.168.0.100 address since your on that network already.. Create a dns entry in pfsense for plex.yourwhateverlocal.tld and there you go ;)

Yeap had the rule disabled - forgot I got scared :)

NAT reflection is what is allowing me to see the admin interface when I type in my pub addr on my lan connected workstation right? I don't like that and I did not enable it. I'd just assume see nothing or what I'm supposed to see form the internet.

canyouseeme.org does not seem to work due to the double nat I have to have set up right now. 192.168.0.100 is actually another router. If I browse locally I can see the XML for plex. Coming in extrenally I still don't see it… but I'm on my iPad so it could be a iOS thing.

johnpoz

"192.168.0.100 is actually another router."

Why?? For what possible point could you have to double nat in your own network? But if your going to forward traffic to another router, then that router would have to forward the traffic to where you want it to go..

Nat reflection is not on by default, you seeing your pfsense admin interface was because your coming from the inside hitting your public IP and you had a forward setup..

Why do you have a double nat?? For what possible reason would anyone want that? Did you need some more ports so you bought another router vs a switch? You don't know how to use a wifi router as just an AP? What?

TyMac

Double NAT is due to transition to the new pfsense router. Mt roomates don't want to have to re do their network and they've used dhcp assigned ips. That is a battle for a different day however.

I still cannot connect externally… Here are the screenshots of the rules I made. Not sure if the webgui listening on port 80 is causing the issue?

plex1.png_thumb

plex2.png_thumb

TyMac

Forgot to add the old router has port 80 open on it forwarded for the PLEX server behind it.

Wolf666

Plex standard/default port is 32400…. each NAT rule should point to Plex_Server_IP:32400.

johnpoz

"Mt roomates don't want to have to re do their network and they've used dhcp assigned ips"

And who says they would have to redo anything??? Dhcp means they would just get the new IP scheme if you changed.. Or you could just use whatever IP scheme they used if you wanted, etc..

You have a block rule saying lan users can not go to NA? Africa, SouthAmerica - where are they coming from?

Here is the thing port forwarding it really drop dead simple - click click, as I showed you.. If you are having problems with it.. Either the traffic is not on the port you think it is, your not even listening on the port where your sending it, your sending it to the wrong place.. Or the traffic is not even getting to you..

You clearly have a double nat - for all I know its a triple nat..

Here - https://doc.pfsense.org/index.php/Port_Forward_Troubleshooting

As mentioned on plex - and by wolf the plex port seems to be 32400

https://support.plex.tv/hc/en-us/articles/200931138-Troubleshooting-Server-Connections

jahonix

@TyMac:

…and surfing to the public IP I could see my pfsense admin page... not good!

Additionally, it could be beneficial to allow access to pfSense on HTTPS only.
This can be set at: System | Advanced | Admin Access
Obviously, this doesn't solve your initial problem for which you got great answers already.

Cino

That is correct, Plex using port TCP 32400. In Plex GUI under Connect (Show Advanced) Check the checkbox for 'Manually specify port' Make sure its 32400.

pfSense UPNP doesn't auto create the rule correctly so you will need to setup a NAT rule as state before. I have my dest and redirect port set to 32400. Works with no issues…
But not sure how this will work being double/tripe NATed...

stanthewizard

I got a strange issue
Everything seems to be fine since I upgraded to 2.2

BUT

for plex

Server is mapped to 32400
I can see the server
I can navigate
But no streaming of video …
With a VPN no issue

Any idea ?

lmartinez073

Hi all

I was trying to do the same. I want to open 80 or 443 and when I check on canyiuseeme.org the port is close. Any advice?

I followed the how to and I still not able to open a port.

johnpoz

For starters are you behind a NAT? Did you tread the port forwarding troubleshooting guide? Did you go through the steps there?

https://doc.pfsense.org/index.php/Port_Forward_Troubleshooting

Does your ISP even allow inbound traffic to 80 or 443.. Many of them may block this because your not allow to run servers on their service - check with your ISP. Per the troubleshooting guide.. Sniff on your wan in pfsense packet capture, go to canyouseeme.org and generate traffic - do you see it in your sniff.. If not then your behind a nat that is not forwarding to you, or you isp is blocking, etc.