Squid3 Crashing frequently
-
Remove 2.1.5 & did fresh full Install pf 2.2 2days ago log is flooding with squid errors as follow… I have to restart every 5 to 10 hrs. Here is my log. Please help...Thanks
2.2-RELEASE (i386)
built on Thu Jan 22 14:04:25 CST 2015
FreeBSD xxxx.xxxx 10.1-RELEASE-p4 FreeBSD 10.1-RELEASE-p4 #0 36d7dec(releng/10.1)-dirty: Thu Jan 22 15:12:38 CST 2015 root@pfsense-22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_SMP.10 i386Installed Pkgs: squid3/sarg/corn/
squid set up:
Transparent HTTP proxy
c-icap & Clamav Antivirus turned off
Hard disk cache size 5000
other are set to default
System Activitiy after restart:
last pid: 89424; load averages: 0.12, 0.10, 0.08 up 0+01:01:13 01:16:31
163 processes: 3 running, 138 sleeping, 22 waitingMem: 161M Active, 76M Inact, 114M Wired, 90M Buf, 1564M Free
Swap: 4096M Total, 4096M FreePID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND
11 root 155 ki31 0K 16K RUN 0 58:05 97.17% [idle{idle: cpu0}]
11 root 155 ki31 0K 16K CPU1 1 58:29 95.36% [idle{idle: cpu1}]
26886 root 25 0 82764K 27220K piperd 1 0:02 1.37% php-fpm: pool lighty (php-fpm)
22893 root 22 0 86764K 32312K accept 0 0:11 1.07% /usr/local/bin/php
85728 proxy 20 0 70292K 33864K kqread 0 0:21 0.39% (squid-1) -f /usr/pbi/squid-i386/local/etc
52063 root 21 0 86764K 35556K accept 0 0:04 0.29% /usr/local/bin/php
32807 unbound 20 0 29784K 14212K kqread 0 0:03 0.20% /usr/local/sbin/unbound -c /var/unbound/un
32807 unbound 20 0 29784K 14212K kqread 0 0:02 0.20% /usr/local/sbin/unbound -c /var/unbound/un
0 root -16 0 0K 104K swapin 1 0:42 0.00% [kernel{swapper}]
12 root -92 - 0K 176K WAIT 0 0:18 0.00% [intr{irq17: bge0 em1}]
0 root -92 0 0K 104K - 0 0:16 0.00% [kernel{dummynet}]
0 root -92 0 0K 104K - 0 0:15 0.00% [kernel{em1 taskq}]
18325 root 20 0 10364K 1972K bpf 1 0:07 0.00% /usr/local/sbin/filterlog -i pflog0 -p /va
4 root -16 - 0K 16K - 0 0:04 0.00% [cam{scanner}]
24872 root 20 0 10300K 2032K select 0 0:03 0.00% /usr/sbin/syslogd -s -c -c -l /var/dhcpd/v
12 root -88 - 0K 176K WAIT 0 0:03 0.00% [intr{irq23: uhci3 ehc}]
12 root -60 - 0K 176K WAIT 1 0:02 0.00% [intr{swi4: clock}]
5 root -16 - 0K 8K pftm 1 0:02 0.00% [pf purge]
Log After Restart:
Feb 7 00:21:04 syslogd: kernel boot file is /boot/kernel/kernel
Feb 7 00:21:04 syslogd: exiting on signal 15
Feb 7 00:21:04 check_reload_status: Syncing firewall
Feb 7 00:18:58 sshlockout[44220]: sshlockout/webConfigurator v3.0 starting up
Feb 7 00:18:58 php-fpm[44110]: /index.php: Successful login for user 'admin' from: x.x.x.87
Feb 7 00:18:58 php-fpm[44110]: /index.php: Successful login for user 'admin' from: x.x.x.87
Feb 7 00:16:18 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:18 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:17 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:17 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:17 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:17 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:17 lighttpd[45883]: (connections.c.137) (warning) close: 12 Connection reset by peer
Feb 7 00:16:17 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:17 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:17 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:17 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:17 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:17 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:17 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Feb 7 00:16:17 squid[85073]: Squid Parent: (squid-1) process 85728 started
Feb 7 00:16:17 squid[85073]: Squid Parent: will start 1 kids
Feb 7 00:16:16 php-fpm[42175]: /rc.start_packages: Starting Squid
Feb 7 00:16:05 php-fpm[42175]: /rc.start_packages: [Squid] - Squid_resync function call pr: bp:1 rpc:no
Feb 7 00:16:05 php-fpm[42175]: /rc.start_packages: Restarting/Starting all packages.
Feb 7 00:16:05 kernel: done.
Feb 7 00:16:05 syslogd: kernel boot file is /boot/kernel/kernel
Feb 7 00:16:05 syslogd: exiting on signal 15
Feb 7 00:16:05 kernel: done.
Feb 7 00:16:05 php: rc.bootup: Creating rrd update script
Feb 7 00:15:59 kernel: load_dn_sched dn_sched PRIO loaded
Feb 7 00:15:59 kernel: load_dn_sched dn_sched WF2Q+ loaded
Feb 7 00:15:59 kernel: load_dn_sched dn_sched RR loaded
Feb 7 00:15:59 kernel: load_dn_sched dn_sched QFQ loaded
Feb 7 00:15:59 kernel: load_dn_sched dn_sched FIFO loaded
Feb 7 00:15:59 kernel: DUMMYNET 0 with IPv6 initialized (100409)
Feb 7 00:15:59 kernel: ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
Feb 7 00:15:59 kernel:
Feb 7 00:15:59 kernel: .done.
Feb 7 00:15:57 php: rc.bootup: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:15:57 kernel: ..
Feb 7 00:15:56 php: rc.bootup: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:15:56 kernel: .
Feb 7 00:15:56 php-fpm[18893]: /rc.dyndns.update: phpDynDNS (x.x..com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:15:55 kernel: .
Feb 7 00:15:55 php: rc.bootup: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:15:55 check_reload_status: Updating all dyndns
Feb 7 00:15:55 kernel: done.
Feb 7 00:15:54 kernel: done.
Feb 7 00:15:54 kernel: done.
Feb 7 00:15:54 php: rc.bootup: ROUTING: setting default route to x.x.x.x.x
Feb 7 00:15:52 kernel: done.
Feb 7 00:15:52 kernel: done.
Feb 7 00:15:50 kernel: done.
Feb 7 00:15:49 kernel: em1: link state changed to UP
Feb 7 00:15:49 check_reload_status: Linkup starting em1
Feb 7 00:15:49 kernel: em0: link state changed to UP
Feb 7 00:15:49 kernel:
Feb 7 00:15:49 check_reload_status: Linkup starting em0
Feb 7 00:15:48 php: rc.bootup: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:15:48 kernel: ..
Feb 7 00:15:47 kernel: .
Feb 7 00:15:47 php: rc.bootup: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:15:46 php-fpm[242]: /rc.newwanip: rc.newwanip: Info: starting on bge0.
Feb 7 00:15:46 php: rc.bootup: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:15:45 kernel: .
Feb 7 00:15:45 kernel: pflog0: promiscuous mode enabled
Feb 7 00:15:45 kernel: done.
Feb 7 00:15:45 php: rc.bootup: Resyncing OpenVPN instances.
Feb 7 00:15:45 php: rc.bootup: Accept router advertisements on interface bge0
Feb 7 00:15:45 check_reload_status: rc.newwanip starting bge0
Feb 7 00:15:44 kernel: bge0: link state changed to UP
Feb 7 00:15:44 check_reload_status: Linkup starting bge0
Feb 7 00:15:42 sshlockout[6983]: sshlockout/webConfigurator v3.0 starting up
Feb 7 00:15:42 sshd[6890]: Server listening on 0.0.0.0 port xxxx.
Feb 7 00:15:42 sshd[6890]: Server listening on :: port xxxx.
Feb 7 00:15:41 check_reload_status: Linkup starting bge0
Feb 7 00:15:41 kernel: bge0: link state changed to DOWN
Feb 7 00:15:41 kernel: coretemp1: <cpu on-die="" thermal="" sensors="">on cpu1
Feb 7 00:15:41 kernel: coretemp0: <cpu on-die="" thermal="" sensors="">on cpu0
Feb 7 00:15:41 kernel: Trying to mount root from ufs:/dev/da0s1a [rw]…
Log Before Restart:
Feb 7 00:14:21 shutdown: reboot by root:
Feb 7 00:14:21 shutdown: reboot by root:
Feb 7 00:14:18 php-fpm[77185]: /reboot.php: The command '/usr/local/etc/rc.d/cron.sh stop' returned exit code '1', the output was ''
Feb 7 00:14:18 php-fpm[77185]: /reboot.php: The command '/usr/local/etc/rc.d/squid.sh stop' returned exit code '1', the output was 'squid: ERROR: Could not send signal 15 to process 76424: (3) No such process'
Feb 7 00:14:18 php-fpm[80701]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:14:17 php-fpm[80701]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:14:16 php-fpm[80701]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:14:15 php-fpm[77192]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:14:14 check_reload_status: Reloading filter
Feb 7 00:14:14 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:14:14 check_reload_status: Restarting ipsec tunnels
Feb 7 00:14:14 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:14:13 php-fpm[77185]: /reboot.php: Stopping all packages.
Feb 7 00:13:45 php-fpm[41968]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:13:44 php-fpm[41968]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:13:43 php-fpm[41968]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:13:42 php-fpm[33707]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:13:41 check_reload_status: Reloading filter
Feb 7 00:13:41 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:13:41 check_reload_status: Restarting ipsec tunnels
Feb 7 00:13:41 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:13:33 php-fpm[30202]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:13:32 php-fpm[30202]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:13:31 php-fpm[30202]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:13:30 php-fpm[23665]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:13:29 check_reload_status: Reloading filter
Feb 7 00:13:29 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:13:29 check_reload_status: Restarting ipsec tunnels
Feb 7 00:13:29 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:11:53 php-fpm[44123]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:11:52 php-fpm[44123]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:11:51 php-fpm[44123]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:11:50 php-fpm[3249]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:11:49 check_reload_status: Reloading filter
Feb 7 00:11:49 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:11:49 check_reload_status: Restarting ipsec tunnels
Feb 7 00:11:49 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:09:49 php-fpm[3249]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:09:48 php-fpm[3249]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:09:47 php-fpm[3249]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:09:45 php-fpm[98427]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:09:43 php-fpm[98427]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:09:43 php-fpm[78412]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:09:42 check_reload_status: Reloading filter
Feb 7 00:09:42 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:09:42 check_reload_status: Restarting ipsec tunnels
Feb 7 00:09:42 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:09:42 php-fpm[98427]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:09:41 php-fpm[78412]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:09:40 check_reload_status: Reloading filter
Feb 7 00:09:40 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:09:40 check_reload_status: Restarting ipsec tunnels
Feb 7 00:09:40 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:09:11 php-fpm[78412]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:09:10 php-fpm[78412]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:09:09 php-fpm[78412]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:09:07 php-fpm[76913]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:09:06 php-fpm[76913]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:09:05 php-fpm[76913]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:09:05 php-fpm[38890]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:09:04 php-fpm[38890]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:09:03 check_reload_status: Reloading filter
Feb 7 00:09:03 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:09:03 check_reload_status: Restarting ipsec tunnels
Feb 7 00:09:03 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:09:03 check_reload_status: Reloading filter
Feb 7 00:09:03 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:09:03 check_reload_status: Restarting ipsec tunnels
Feb 7 00:09:03 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:08:22 php-fpm[35380]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:08:21 php-fpm[35380]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:08:20 php-fpm[35380]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:08:19 php-fpm[30379]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:08:18 check_reload_status: Reloading filter
Feb 7 00:08:18 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:08:18 check_reload_status: Restarting ipsec tunnels
Feb 7 00:08:18 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:07:51 php-fpm[30379]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:07:50 php-fpm[30379]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:07:49 php-fpm[30379]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:07:49 php-fpm[12432]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:07:48 check_reload_status: Reloading filter
Feb 7 00:07:48 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:07:48 check_reload_status: Restarting ipsec tunnels
Feb 7 00:07:48 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:07:43 php-fpm[12432]: /index.php: Successful login for user 'admin' from: x.x.x.x.x
Feb 7 00:07:43 php-fpm[12432]: /index.php: Successful login for user 'admin' from: x.x.x.x.x
Feb 7 00:07:30 php-fpm[12432]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:07:29 php-fpm[12432]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:07:28 php-fpm[12432]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:07:27 php-fpm[8351]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:07:26 check_reload_status: Reloading filter
Feb 7 00:07:26 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:07:26 check_reload_status: Restarting ipsec tunnels
Feb 7 00:07:26 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:07:21 php-fpm[8351]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:07:20 php-fpm[8351]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:07:19 php-fpm[8351]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:07:18 php-fpm[4123]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:07:17 check_reload_status: Reloading filter
Feb 7 00:07:17 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:07:17 check_reload_status: Restarting ipsec tunnels
Feb 7 00:07:17 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:07:08 php-fpm[4123]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:07:07 php-fpm[4123]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:07:06 php-fpm[4123]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:07:05 php-fpm[81578]: /rc.dyndns.update: phpDynDNS (xxx.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 7 00:07:04 check_reload_status: Reloading filter
Feb 7 00:07:04 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:07:04 check_reload_status: Restarting ipsec tunnels
Feb 7 00:07:04 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:07:04 php-fpm[933]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:07:03 php-fpm[933]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "pfearly" rules.
Feb 7 00:07:02 php-fpm[933]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "nat" rules.
Feb 7 00:01:30 check_reload_status: Reloading filter
Feb 7 00:01:30 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 7 00:01:30 check_reload_status: Restarting ipsec tunnels
Feb 7 00:01:30 check_reload_status: updating dyndns WAN_DHCP
Feb 7 00:00:39 php-fpm[99562]: /rc.filter_configure_sync: SQUID is installed but not started. Not installing "filter" rules.
Feb 7 00:00:38 php: swapstate_check.php: Squid cache and/or swap.state exceeded size limits. Removing and rotating. File was 1174768 bytes, 0% of total disk space.
Feb 7 00:00:37 squid[20219]: Squid Parent: (squid-1) process 20640 exited with status 0
Feb 7 00:00:34 check_reload_status: Reloading filter
Feb 7 00:00:33 Squid_Alarm[40179]: Reconfiguring filter…
Feb 7 00:00:30 Squid_Alarm[39124]: Attempting restart…
Feb 7 00:00:30 Squid_Alarm[38926]: Squid has exited. Reconfiguring filter.
Feb 7 00:00:20 squid[75794]: Exiting due to repeated, frequent failures
Feb 7 00:00:20 squid[75794]: Squid Parent: (squid-1) process 36855 will not be restarted due to repeated, frequent failures
Feb 7 00:00:20 squid[75794]: Squid Parent: (squid-1) process 36855 exited with status 1
Feb 7 00:00:20 (squid-1): Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 7 00:00:19 squid[75794]: Squid Parent: (squid-1) process 36855 started
Feb 7 00:00:16 squid[75794]: Squid Parent: (squid-1) process 32780 exited with status 1
Feb 7 00:00:16 (squid-1): Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 7 00:00:16 squid[75794]: Squid Parent: (squid-1) process 32780 started
Feb 7 00:00:13 squid[75794]: Squid Parent: (squid-1) process 21453 exited with status 1
Feb 7 00:00:13 (squid-1): Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 7 00:00:12 squid[75794]: Squid Parent: (squid-1) process 21453 started
Feb 7 00:00:09 squid[75794]: Squid Parent: (squid-1) process 21222 exited with status 1
Feb 7 00:00:09 (squid-1): Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 7 00:00:09 squid[75794]: Squid Parent: (squid-1) process 21222 started
Feb 7 00:00:07 squid[20219]: Squid Parent: (squid-1) process 20640 started
Feb 7 00:00:07 squid[20219]: Squid Parent: will start 1 kids
Feb 7 00:00:07 php: swapstate_check.php: The command '/usr/pbi/squid-i386/sbin/squid -k kill -f /usr/pbi/squid-i386/local/etc/squid/squid.conf' returned exit code '1', the output was 'squid: ERROR: Could not send signal 9 to process 76424: (3) No such process'
Feb 7 00:00:05 squid[75794]: Squid Parent: (squid-1) process 15038 exited with status 1
Feb 7 00:00:05 (squid-1): Failed to verify one of the swap directories, Check cache.log for details. Run 'squid -z' to create swap directories if needed, or if running Squid for the first time.
Feb 7 00:00:05 squid[75794]: Squid Parent: (squid-1) process 15038 started
Feb 7 00:00:02 squid[75794]: Squid Parent: (squid-1) process 76424 exited due to signal 6 with status 0
Feb 7 00:00:02 kernel: pid 76424 (squid), uid 62: exited on signal 6
Feb 7 00:00:01 php: swapstate_check.php: Creating squid cache subdirs in /var/squid/cache
Feb 7 00:00:01 php: swapstate_check.php: Creating Squid cache dir /var/squid/cache
Feb 7 00:00:01 php: sarg.php: Sarg: force refresh now with -ddate +%d/%m/%Y-date +%d/%m/%Yargs, compress(on) and none action after sarg finish.
Feb 7 00:00:01 php: sarg.php: Sarg: force refresh now with -ddate +%d/%m/%Y-date +%d/%m/%Yargs, compress(on) and none action after sarg finish.
Feb 6 23:59:52 php-fpm[95842]: /rc.dyndns.update: phpDynDNS (x.x.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Feb 6 23:59:51 check_reload_status: Reloading filter
Feb 6 23:59:51 check_reload_status: Restarting OpenVPN tunnels/interfaces
Feb 6 23:59:51 check_reload_status: Restarting ipsec tunnels
Feb 6 23:59:51 check_reload_status: updating dyndns WAN_DHCP
Feb 6 23:59:36 php-fpm[89733]: /rc.dyndns.update: phpDynDNS (x.x.com): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.</cpu></cpu> -
install cron package
add squid -z command in the cron
as a temporary solution -
thanks for quick reply…Cron is already installed...How to set squid -z in cron?
-
Better see cache.log and squid -k parse
Squid3 on pfsense 2.2 32 bits still need a package compilation to work in transparent mode. I'll ping Renato again…
-
thanks you for reply…same log again today...I will wait for solution.
-
Same log again & again…Finally I did uninstall squid and sarg today and see what I got...I can log in remotely in to pfbox but on dashboard Version not Obtaining update status...means no internet!!!! but I can log in remotely!!!
Feb 24 14:03:38 unbound: [29527:0] fatal error: failed to setup modules
Feb 24 14:03:38 unbound: [29527:0] error: module init for module validator failed
Feb 24 14:03:38 unbound: [29527:0] error: validator: could not apply configuration settings.
Feb 24 14:03:38 unbound: [29527:0] error: validator: error in trustanchors config
Feb 24 14:03:38 unbound: [29527:0] error: error reading auto-trust-anchor-file: /var/unbound/root.key
Feb 24 14:03:38 unbound: [29527:0] error: failed to read /root.key
Feb 24 14:03:38 unbound: [29527:0] error: failed to load trust anchor from /root.key at line 1, skipping
Feb 24 14:03:38 unbound: [29527:0] error: ldns error while converting string to RR at14: Syntax error, could not parse the RR's type: SQLite format 3
Feb 24 14:03:38 unbound: [29527:0] notice: init module 0: validator
Feb 24 13:51:15 unbound: [53329:0] fatal error: failed to setup modules
Feb 24 13:51:15 unbound: [53329:0] error: module init for module validator failed
Feb 24 13:51:15 unbound: [53329:0] error: validator: could not apply configuration settings.
Feb 24 13:51:15 unbound: [53329:0] error: validator: error in trustanchors config
Feb 24 13:51:15 unbound: [53329:0] error: error reading auto-trust-anchor-file: /var/unbound/root.key
Feb 24 13:51:15 unbound: [53329:0] error: failed to read /root.key
Feb 24 13:51:15 unbound: [53329:0] error: failed to load trust anchor from /root.key at line 1, skipping
Feb 24 13:51:15 unbound: [53329:0] error: ldns error while converting string to RR at14: Syntax error, could not parse the RR's type: SQLite format 3
Feb 24 13:51:15 unbound: [53329:0] notice: init module 0: validator
Feb 24 13:51:12 unbound: [44948:0] fatal error: failed to setup modules
Feb 24 13:51:12 unbound: [44948:0] error: module init for module validator failed
Feb 24 13:51:12 unbound: [44948:0] error: validator: could not apply configuration settings.
Feb 24 13:51:12 unbound: [44948:0] error: validator: error in trustanchors config
Feb 24 13:51:12 unbound: [44948:0] error: error reading auto-trust-anchor-file: /var/unbound/root.key
Feb 24 13:51:12 unbound: [44948:0] error: failed to read /root.key
Feb 24 13:51:12 unbound: [44948:0] error: failed to load trust anchor from /root.key at line 1, skipping
Feb 24 13:51:12 unbound: [44948:0] error: ldns error while converting string to RR at14: Syntax error, could not parse the RR's type: SQLite format 3
Feb 24 13:51:12 unbound: [44948:0] notice: init module 0: validator
Feb 24 13:18:01 unbound: [29687:0] fatal error: failed to setup modules
Feb 24 13:18:01 unbound: [29687:0] error: module init for module validator failed
Feb 24 14:03:39 radvd[36736]: no auto-selected prefix on interface em0, disabling advertisements
Feb 24 14:03:39 radvd[36736]: version 1.9.1 started
Feb 24 14:01:46 radvd[36270]: sendmsg: No buffer space available
Feb 24 14:01:40 radvd[36270]: sendmsg: No buffer space available
Feb 24 14:01:33 radvd[36270]: sendmsg: No buffer space available
Feb 24 14:01:23 radvd[36270]: sendmsg: No buffer space available
Feb 24 14:01:16 radvd[36270]: sendmsg: No buffer space available
Feb 24 14:01:07 radvd[36270]: sendmsg: No buffer space available
Feb 24 14:01:03 radvd[36270]: sendmsg: No buffer space available
Feb 24 14:00:59 radvd[36270]: sendmsg: No buffer space available
Feb 24 14:00:55 radvd[36270]: sendmsg: No buffer space available
Feb 24 14:00:48 radvd[36270]: sendmsg: No buffer space available
–-----------------------------------------------------------------------Feb 24 14:04:50 php-fpm[70424]: /index.php: Successful login for user 'admin' from: xx.xx.xxx.xxx
Feb 24 14:03:46 php-fpm[39874]: /rc.start_packages: Restarting/Starting all packages.
Feb 24 14:03:46 kernel: done.
Feb 24 14:03:46 syslogd: kernel boot file is /boot/kernel/kernel
Feb 24 14:03:46 syslogd: exiting on signal 15
Feb 24 14:03:46 kernel: done.
Feb 24 14:03:46 php: rc.bootup: Creating rrd update script
Feb 24 14:03:40 kernel: load_dn_sched dn_sched PRIO loaded
Feb 24 14:03:40 kernel: load_dn_sched dn_sched WF2Q+ loaded
Feb 24 14:03:40 kernel: load_dn_sched dn_sched RR loaded
Feb 24 14:03:40 kernel: load_dn_sched dn_sched QFQ loaded
Feb 24 14:03:40 kernel: load_dn_sched dn_sched FIFO loaded
Feb 24 14:03:40 kernel: DUMMYNET 0 with IPv6 initialized (100409)
Feb 24 14:03:40 kernel: ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
Feb 24 14:03:40 kernel: .done.
Feb 24 14:03:39 kernel: ..
Feb 24 14:03:39 check_reload_status: Updating all dyndns
Feb 24 14:03:39 kernel: done.
Feb 24 14:03:38 kernel: done.
Feb 24 14:03:38 kernel: done.
Feb 24 14:03:38 kernel: done.
Feb 24 14:03:38 php: rc.bootup: ROUTING: setting default route to xx.xx.xxx.1
Feb 24 14:03:36 kernel: done.
Feb 24 14:03:36 kernel: done.
Feb 24 14:03:34 kernel: .done.
Feb 24 14:03:33 php-fpm[248]: /rc.newwanip: rc.newwanip: Info: starting on bge0.
Feb 24 14:03:33 kernel: …
Feb 24 14:03:32 kernel: .
Feb 24 14:03:32 kernel: pflog0: promiscuous mode enabled
Feb 24 14:03:32 kernel: done.
Feb 24 14:03:32 php: rc.bootup: Resyncing OpenVPN instances.
Feb 24 14:03:32 check_reload_status: rc.newwanip starting bge0
Feb 24 14:03:31 kernel: bge0: link state changed to UP
Feb 24 14:03:31 check_reload_status: Linkup starting bge0
Feb 24 14:03:28 sshlockout[7462]: sshlockout/webConfigurator v3.0 starting up
Feb 24 14:03:28 sshd[7303]: Server listening on 0.0.0.0 port xxxx.
-
Better see cache.log and squid -k parse
Squid3 on pfsense 2.2 32 bits still need a package compilation to work in transparent mode. I'll ping Renato again…
how about 64bit version? non-transparent mode, cpu utilization going to 100% randomly and cache.log contains this:
2015/02/20 09:43:53 kid1| Starting new negotiateauthenticator helpers…
2015/02/20 09:43:53 kid1| Starting new negotiateauthenticator helpers...
2015/02/20 09:57:20 kid1| Starting new negotiateauthenticator helpers...
2015/02/20 09:57:20 kid1| Starting new negotiateauthenticator helpers...
2015/02/20 09:57:20 kid1| Starting new negotiateauthenticator helpers...
2015/02/20 10:03:25 kid1| helperDispatch: Helper memberof #Hlpr0 has crashed
2015/02/20 10:03:28 kid1| helperDispatch: Helper memberof #Hlpr0 has crashed
2015/02/20 10:03:47 kid1| helperDispatch: Helper memberof #Hlpr0 has crashed
2015/02/20 10:04:17 kid1| Starting new memberof helpers...
2015/02/20 10:04:46 kid1| helperDispatch: Helper memberof #Hlpr0 has crashed
2015/02/20 10:04:46 kid1| WARNING: memberof #Hlpr0 exited
2015/02/20 10:04:46 kid1| ERROR: The memberof helpers are crashing too rapidly, need help!
2015/02/20 10:04:47 kid1| WARNING: memberof #Hlpr0 exited
2015/02/20 10:04:47 kid1| ERROR: The memberof helpers are crashing too rapidly, need help!
2015/02/20 10:04:52 kid1| helperDispatch: Helper memberof #Hlpr0 has crashed
2015/02/20 10:04:52 kid1| helperDispatch: Helper memberof #Hlpr0 has crashed
2015/02/20 10:05:07 kid1| WARNING: memberof #Hlpr0 exited
2015/02/20 10:05:07 kid1| ERROR: The memberof helpers are crashing too rapidly, need help!
2015/02/20 10:06:12 kid1| WARNING: memberof #Hlpr0 exited
2015/02/20 10:06:15 kid1| WARNING: memberof #Hlpr0 exited
FATAL: The memberof helpers are crashing too rapidly, need help!Squid Cache (Version 3.4.10): Terminated abnormally.
CPU Usage: 38855.042 seconds = 38840.176 user + 14.866 sys
Maximum Resident Size: 774000 KB
Page faults with physical i/o: 11
2015/02/20 10:06:18 kid1| Starting Squid Cache version 3.4.10 for amd64-portbld-freebsd10.1..."memberof" from squid.conf:
external_acl_type memberof ttl=300 ipv4 %LOGIN /usr/local/libexec/squid/ext_ldap_group_acl -P -K -R -b "dc=,dc=local" -D "squid_k@.local" -W "/usr/local/etc/squid/squid_k.pass" -f "(&(objectclass=person)(sAMAccountName=%v)(memberOf:1.2.840.113556.1.4.1941:=cn=%g,OU=Internet,DC=***,DC=local))" -h 192.168.0.231 192.168.0.239
can i use "ext_ldap_group_acl" helper from squid version 3.3.10 for example, coz it's just an external (to squid) program if i understand correctly, and it working fine on pfsense 2.1.5?
