Multi wan + specific routes
-
Hi im going to be setting a pfsence box up with multi wan load balancing (VM 152/TT 70) the thing is i have TV with talktalk which has to 100% go over the talktalk internet other wise the IP TV dose not work, The virgin media connection will be modem to WAN 1 and the TT modem or router will be to WAN 2, The question is will i be able to specificity tell PFsence to let the TT TV box only use the TT connection and not both like the rest of the systems EG assign the TVs mac address and thus just having a standard modem to WAN 2, or would i be better off keeping my TT router in place to wan 2 and setting the DMZ port to the PFsence box (so kinda like direct modem) but also leaving my TT IP TV box on the tt router as well or would this be an un-ideal set up.
any advice is much appreciated
Ash
-
If you can match the traffic using firewall rules you can policy route / NAT it however you like.
