[SOLVED] IPv6 PPPoe and track interface

[snowyrain]

Hallo,

@hda:

Why is your WAN PPPoE MTU 1300 ?… Try 1492.

thanks for your reply. That was only a test. I have set the MTU to 1492, but nothing changed.  :(

Snowyrain

[hda]

@snowyrain:

…
I have set the MTU to 1492, but nothing changed.
...

And including rebooting pfSense ?…

[snowyrain]

Yes, I have restarted pfsense. But it doesn't work. :(

[hda]

Are you using DTv130 pass-tru ? Show your pfSense WAN & LAN webconfig setup.

[snowyrain]

Hello,

I have made screenshots.

01-07 DrayTek Modem

Thank You


[hda]

It is important you know or find-out the Telekom protocol to communicate with.
We can only guess and suggest.

Set DT-MoDem on PPPoE-protocol values & pass-through (yourscreen-2), not MPoA. No VLAN settings.
First achieve "bridging" and if there is an IPv4 on the pfSense-WAN.

Next is IPv6. You could read at another thread, i.e.:
https://forum.pfsense.org/index.php?topic=89674.msg496564#msg496564

[razzfazz]

It looks like you have "Internet Access >> IPv6 connection type" set to "offline" on the modem?!

In addition to that, I think if for DHCP-PD to work through PPPoE, you need to check "Request a IPv6 prefix/information through the IPv4 connectivity link", and possibly "Only request a IPv6 prefix, do not request a IPv6 address" as well.

Really, though, the best way to figure out what's going on is to actually look at the logs.

[snowyrain]

Hello,

I've done a complete reinstall. I've tried many settings and reboot the system after every change. PFsense gets an IPv4 and IPv6 Address. PFsense can ping ipv6.google.com and other ipv4 hosts.

But  "Track Interface" didn't work.

I've a second DSL-Connection with an Fritzbox as Router. This setting works fine. But I don't like double NAT. So I don't want use the Fritzbox.

Which log files are relevant?

Snowyrain

[2.2-RELEASE][root@pfSense.localdomain]/root: ifconfig
em0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        options=9b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum>ether 00:0c:  :  :  :c2
        inet6 fe80::20c:   ff:fe   :f c2%em0 prefixlen 64 scopeid 0x1
        inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
        nd6 options=23 <performnud,accept_rtadv,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
em1: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1492
        options=9b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum>ether 00:0c:  :  :  :cc
        inet 192.168.3.14 netmask 0xffffff00 broadcast 192.168.3.255
        inet6 2003:56:ca3c:     :20c:  ff:fe  :   cc prefixlen 64
        inet6 fe80::1:1%em1 prefixlen 64 scopeid 0x2
        nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
pflog0: flags=100 <promisc>metric 0 mtu 33144
pfsync0: flags=0<> metric 0 mtu 1500
        syncpeer: 224.0.0.240 maxupd: 128 defer: on
        syncok: 1
lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
        options=600003 <rxcsum,txcsum,rxcsum_ipv6,txcsum_ipv6>inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        nd6 options=21 <performnud,auto_linklocal>enc0: flags=0<> metric 0 mtu 1536
        nd6 options=21 <performnud,auto_linklocal>pppoe0: flags=88d1 <up,pointopoint,running,noarp,simplex,multicast>metric 0 mtu 1492
        inet6 fe80::20c:  ff:f    :  c2%pppoe0 prefixlen 64 scopeid 0x7
        inet6 2003:56:ca7f:     :20c:   ff:fe   :  c2 prefixlen 64 autoconf
        inet 217.227.255.     --> 217.0.117.     netmask 0xffffffff
        nd6 options=23 <performnud,accept_rtadv,auto_linklocal></performnud,accept_rtadv,auto_linklocal></up,pointopoint,running,noarp,simplex,multicast></performnud,auto_linklocal></performnud,auto_linklocal></rxcsum,txcsum,rxcsum_ipv6,txcsum_ipv6></up,loopback,running,multicast></promisc></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum></up,broadcast,running,simplex,multicast></full-duplex></performnud,accept_rtadv,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum></up,broadcast,running,simplex,multicast> 


[hda]

You did not get the IPv6 address (yet) :-
Your Interfaces should show an "IPv6 Address" entry for PPPoE. And Dashboard-Interfaces should show at least a WAN IPv6 number entry.

You have: pppoe0 as 2003:56:ca7f:–---; em1 as 2003:56:ca3c:-----; and  em0 as fe80::20c:----.
What is all this ? Can you make a sensible explanation for it ? Devise a proper setup ?

Your problem must/can be fixed with the corrrect pfSense-WAN config. This is Telekom/ISP specific...

[snowyrain]

Hello,

I don't know why. But it works at the moment. I think it was a short disorder from my ISP. But I'm not sure.

Thank you very much vor your help.

Have I nice day.

Snowyrain

[hda]

@snowyrain:

I don't know why…

As a pfSense manager yourself, that is not a very satisfying position.  :P