Alix 2d13 upgrade 2.2.0 ERROR 19
-
I've been running on 2.1 since a year now and yesterday after the automatic upgrade to 2.2.0 I got error 19. Bios 0.99h.
Is my CF dead?thank you for your help!
VT: running with driver "vga".
CPU: Geode(TM) Integrated Processor by AMD PCS (498.06-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x5a2 Family = 0x5 Model = 0xa Stepping = 2
Features=0x88a93d <fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx>AMD Features=0xc0400000 <mmx+,3dnow!+,3dnow!>real memory = 268435456 (256 MB)
avail memory = 226222080 (215 MB)
pnpbios: Bad PnP BIOS data checksum
random device not loaded; using insecure entropy
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc080eb70, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc080ec20, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc080ecd0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xc0837300, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc08373b0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc0837460, 0) error 1
wlan: mac acl policy registered
kbd0 at kbdmux0
K6-family MTRR support enabled (2 registers)
random: <software, yarrow="">initialized
ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223)
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
pcib0 pcibus 0 on motherboard
pci0: <pci bus="">on pcib0
Geode LX: PC Engines ALIX.2 v0.99h tinyBIOS V1.4a (C)1997-2007
pci0: <encrypt decrypt,="" entertainment="" crypto="">at device 1.2 (no driver attached)
vr0: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1000-0x10ff mem 0xe0000000-0xe00000ff irq 10 at device 9.0 on pci0
vr0: Quirks: 0x2
vr0: Revision: 0x96
miibus0: <mii bus="">on vr0
ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr1: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1400-0x14ff mem 0xe0040000-0xe00400ff irq 11 at device 10.0 on pci0
vr1: Quirks: 0x2
vr1: Revision: 0x96
miibus1: <mii bus="">on vr1
ukphy1: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus1
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr2: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1800-0x18ff mem 0xe0080000-0xe00800ff irq 15 at device 11.0 on pci0
vr2: Quirks: 0x2
vr2: Revision: 0x96
miibus2: <mii bus="">on vr2
ukphy2: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus2
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
isab0: <pci-isa bridge="">port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x9d7f,0x9c00-0x9c3f at device 15.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <amd cs5536="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 15.2 on pci0
ata0: <ata channel="">at channel 0 on atapci0
ata1: <ata channel="">at channel 1 on atapci0
ohci0: <ohci (generic)="" usb="" controller="">mem 0xefffe000-0xefffefff irq 12 at device 15.4 on pci0
usbus0 on ohci0
ehci0: <amd cs5536="" (geode)="" usb="" 2.0="" controller="">mem 0xefffd000-0xefffdfff irq 12 at device 15.5 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
cpu0 on motherboard
pmtimer0 on isa0
orm0: <isa option="" rom="">at iomem 0xe0000-0xea7ff pnpid ORM0000 on isa0
atrtc0: <at realtime="" clock="">at port 0x70 irq 8 on isa0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <at timer="">at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
ppc0: parallel port not found.
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <amd>at usbus0
uhub0: <amd 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen1.1: <amd>at usbus1
uhub1: <amd 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <sandisk sdcfh-004g="" hdx="" 6.02="">CFA-0 device
ada0: Serial Number AIZ061311235105
ada0: 16.700MB/s transfers (PIO4, PIO 512bytes)
ada0: 3815MB (7813120 512 byte sectors: 16H 63S/T 7751C)
ada0: Previously was known as ad0
GEOM_PART: integrity check failed (ada0, MBR)
random: unblocking device.
Timecounter "TSC" frequency 498061278 Hz quality 800
GEOM_PART: integrity check failed (diskid/DISK-AIZ061311235105, MBR)
Root mount waiting for: usbus1 usbus0
uhub0: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1
uhub1: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ufs/pfsense0 [ro,sync,noatime]…
mountroot: waiting for device /dev/ufs/pfsense0 ...
Mounting from ufs:/dev/ufs/pfsense0 failed with error 19.Loader variables:
vfs.root.mountfrom=ufs:/dev/ufs/pfsense0
vfs.root.mountfrom.options=ro,sync,noatimeManual root filesystem specification:
<fstype>: <device>[options]
Mount <device>using filesystem <fstype>and with the specified (optional) option list.eg. ufs:/dev/da0s1a
zfs:tank
cd9660:/dev/acd0 ro
(which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line="">Abort manual input</empty></fstype></device></device></fstype></sandisk></amd></amd></amd></amd></at></at></isa></amd></ohci></ata></ata></amd></isa></pci-isa></generic></mii></via></generic></mii></via></generic></mii></via></encrypt></pci></software></software,></mmx+,3dnow!+,3dnow!></fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx> -
You can try to go back to your previous pfSense version: You will need a working serial connection when booting, then choose the alternate NanoBSD Boot Slice (it should contain your previous pfSense install) when you see the option.
I had to troubleshoot a non-working config-xml: deleting the /conf/config.xml from the command prompt (loader prompt) restored the previous working config on the next boot.
-
https://doc.pfsense.org/index.php/Upgrade_Guide#Disk_Driver_Changes