SSH, Http issues
-
I removed pfblocker from pfsense. It only used a table to do the blocking, but it didn't work too well . I have been dealing with a failed hard drive on my server, so just now getting back. I'll put the server in question behind the firewall after hours tonight and run some tests.
-
back behind the firewall and nothing seems to get through. This is a Freebsd mail server and all mail services is down, http services to postfixadmin is down and to Roundcube.
Nothing is showing up in the logs, and I ghet Operation Timed out on the ssh operation, and Unable to connect remote host on telnet to mail ports and http -
Nothing seems to get through in what direction? From lan to wan or from wan to lan with a forward?
Your saying its only 1 IP? Can not help you without some details..
-
Start from the basics and work up.
I assume you have some evidence that it is actually connected at all, to anything!, like a connection UP status somewhere? Can you ping the server from the pfSense LAN IP? Can you ping the pfSense box from the server?
Is the server a VM also?Steve
-
Nothing seems to get through in what direction? From lan to wan or from wan to lan with a forward?
Your saying its only 1 IP? Can not help you without some details..
From wan to lan .. But my lan is setup to pass to public IPs .. This was setup and configured with a Pfsense Support call with their Washington DC office.
It's starting to look like it's time to switch to another firewall vendor. They upgrade to 2.2, and tell me after the crash that I should have read the release notes, after 5 years of successful upgrades. $400 later I'm still having problems.
It also looks like the firewall is slowing traffic down compared to how it was behaving with 2.15
-
Nothing seems to get through in what direction? From lan to wan or from wan to lan with a forward?
Your saying its only 1 IP? Can not help you without some details..
From wan to lan .. But my lan is setup to pass to public IPs .. This was setup and configured with a Pfsense Support call with their Washington DC office.
It's starting to look like it's time to switch to another firewall vendor. They upgrade to 2.2, and tell me after the crash that I should have read the release notes, after 5 years of successful upgrades. $400 later I'm still having problems.
It also looks like the firewall is slowing traffic down compared to how it was behaving with 2.15
This is a Xenserver with about 4 VM servers behind the firewall, well 3 now. I'm taking one out from behind today to test the speed issue. Obviously, all the other servers are working fine, most http, but i can ssh to all telnet to ports, etc. Just not to the one when firewall'd
-
Perhaps I've misunderstood this. So you have one particular server that isn't accessible via any method externally (SSH, http or FTP). Other servers are working though and the problem server can get out OK? is accessible internally? This is also a VM in Xen?
Do you see the traffic blocked in the firewall logs? That would be my first suspect.
Steve
-
Perhaps I've misunderstood this. So you have one particular server that isn't accessible via any method externally (SSH, http or FTP). Other servers are working though and the problem server can get out OK? is accessible internally? This is also a VM in Xen?
Do you see the traffic blocked in the firewall logs? That would be my first suspect.
Steve
Yes, one server on a Xenserver. I have access to the machine with XenCenter to the machine and all the VM. Xencenter is a management console for Xenserver. So access internally was over Xencenter. Changing the network interface for this nice from the Pfsense firewall network to an external Nic to the Wan is the only thing that would fix this problem.
Yesterday I installed an external Sonicwall from my hosting provider. Now every server behind the firewall and working as expected. Since this is a rented firewall. I may purchase an Pfsense box and try the same. I'll probably wait on a couple more upgrades and watch problems. Remember that Pfsense was also slowing down traffic, especially for website loading.
Things are normal now, and just hoping Pfsense addresses this. Like I said this box has been running pfsense successfully for 5 years until the 2.2 release.thanks
-
Hmm, well that's odd.
If the other servers were working well but one is not I would first check the firewall logs to see if that traffic is being blocked. If it is then you have some rule blocking traffic that shouldn't be or no rule allowing it where there should be.
If there's nothing in the logs then it's probably a routing issue. I'd check the subnetmasks are correct, check the public IP is being routed to the server correctly.
If it's non of those things then it could be something that's grabbing the traffic before it gets to the firewall like a VPN or a port forward.How much slowing down was there to the servers. There certainly have been issues with Xen going to 2.2, mostly because it automatically updated the interfaces it presents to pfSense which no VM host should do but there you go. They are known issues at least. There is also this: https://forum.pfsense.org/index.php?topic=88467.0
However it doesn't seem like you've hit that because it slows the traffic almost to a crawl.Steve
-
What doesn't sound like the Xen offload issue?
If access TO pfSense from either side seems fine but access THROUGH pfSense is slow, that's what it sounds like to me.
-
Well I guess if it's on a separate virtual interface and only that interface has offloading enabled in the host then maybe. The offloading options in pfSense are global though so I would expect it to affect all servers equally. Also the slowing down described here doesn't sound like the 0.4Kbps described in the known symptoms.
However since this is a known issue I would definitely be disabling off-loading everywhere anyway, that's why I linked to it.
I don't use Xen so I'm completely open to being wrong here. ;)Steve
