Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    New setup not working

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    4 Posts 3 Posters 1.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S Offline
      skylamon
      last edited by

      So my old setup burned down with PSU failure, else i wouldnt be here asking for help. So the thing is :
      My ISP connects me via GPON and its router : Inteno DG301 which run all of its VOIP and Digital TV stuff but crashes when everyone connects to it. So i went for PfSense two years ago and kinda have forgotten how i set it up. So now due to the burn-out thing i have to re-set whole system again.
      So system runs like this : GPON>Inteno router> Port 1 Cable to Wan of PfSense. Lan of PfSense to Main switch.
      Inteno config : Gateway 192.168.1.254. DHCP 192.168.1.60 to 1.252 (253 for some other stuff, 254 router acces)
      Pfsense config : Gateway 10.0.0.1 DHCP 10.0.0.10 - 10.0.3.254
      PFsense is given IP of 192.168.1.62 from Inteno.

      So problem now is, that i can ping any address on the Console (VGA), but i cant ping anything via connected PC nor WebConsole.
      PFsense connected computers cant ping each other nor the computers on Inteno network
      PFsense computers can ping PFsense router
      PFsense computers cant access any internet atm.
      How to solve this? From my 2 year ago setup i remeber you had to make a rule to allow connetions between two networks but how?
      And why cant they connect to interet ?

      1 Reply Last reply Reply Quote 0
      • D Offline
        divsys
        last edited by

        You don't mention what hardware you're using for the old/new setup.

        If you haven't reformatted the old HD from the burned out pfSense box, you can probably still retrieve the old config.xml file and get most/all of your original setup back.

        -jfp

        1 Reply Last reply Reply Quote 0
        • S Offline
          skylamon
          last edited by

          Old setup was totally destroyed, including the hdd, when switching HDD on, it doesnt power up and burning smell appears.

          New system :
          Cpu : Amd Sempron 3850 X4
          Motherboard : ASUS AM1M-A
          4GB DDR3
          2x D-LINK DGE-560T (1Gbit) network cards
          Kingston SSDNow S200 30GB SATAIII
          Some DVD reader
          Corsair ATX 2.31 VS Series 350W
          And INTER-TECH SY-120 case

          1 Reply Last reply Reply Quote 0
          • KOMK Offline
            KOM
            last edited by

            I would still try hooking the drive up to a different system and see if you can access anything.  Your problem may well be a bad P/S and the drive is fine.

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.