UniFi or EnGenius setup
-
What does pfsense care for what wifi AP you use?? Pfsense sees traffic, doesn't know if it came from a wifi client or not. Its just another mac that it sends and gets packets from.
-
What does pfsense care for what wifi AP you use?? Pfsense sees traffic, doesn't know if it came from a wifi client or not. Its just another mac that it sends and gets packets from.
At this point any information is apresheated. But it does look like i will be ordering the Ubiquiti UAP-AC UniFi Indoor Dual Band Wireless AC1750 3x3 MIMO Access Point/Bridge 2x Gigabit Port. :)
Any more input for anybody else before i push the buy button?
-
I have it and love it.. push the button ;)
-
At this point any information is apresheated. But it does look like i will be ordering the Ubiquiti UAP-AC UniFi Indoor Dual Band Wireless AC1750 3x3 MIMO Access Point/Bridge 2x Gigabit Port. :)
Any more input for anybody else before i push the buy button?
Not sure if they managed to fix it but it seems that the UAP-AC has somewhat low 5GHz range. As a platform, Unifi is leagues ahead of Engenius.
I used to deploy Engenius APs for customers - mostly EAP-600s, some EAP-300 and EAP-350 as well. The EAP-350 is an odd creature and wasn't at all stable. Plus you'd have better luck asking a brick wall for help than Engenius themselves.
The EAP-300 & EAP-600 are relatively stable but they have some odd issues - I've had them crap out when placed in a network where IGMP broadcasts were active (there is no way to stop the EAPs from listening to IGMP). Also, they tend not to work as well when certain features (enabled by default) were active - notably CTL, Aggregation & Auto 20/40Mhz. In a high traffic environment, enabling these would cause the APs to go into limbo.
The Unifi platform is nice and easy to deploy but there's a caveat - you can't manage them as standalone units using a web gui like other APs. You must use their Unifi 3.0 controller software and the APs once adopted by the controller, will only respond to being configured from that machine (unless you manually port the profiles to another controller).
What the Unifi 3.0 platform does very well is seamless roaming (Zero hand-off), firmware updating (you can update all adopted AP's at once or using rolling update), and also the ability to appoint both site administrators and operators (for vouchering).
They are also exceedingly stable units in so far as I've deployed for customers (UAP-Pro). Couple of my friends in the networking industry have also tried the UAP & UAP-LR and everyone has nothing but praises for the platform.
-
Done. UAP-AC it is :)
Thanks for the help all!
-
Done. UAP-AC it is :)
Thanks for the help all!
Well done, one hint on top from me, if you change your pfSense box to a greater one a one day
and/or your Ubiquiti WiFi networks is growing up, you can install a Linux OS on the old box and install
the Ubiquiti Wireless Controller Software for free an in! So you get a full WiFi Controller and you are
able to manage the WLAN APs much easier. -
@BlueKobold:
…
Well done, one hint on top from me, if you change your pfSense box to a greater one a one day
and/or your Ubiquiti WiFi networks is growing up, you can install a Linux OS on the old box and install
the Ubiquiti Wireless Controller Software for free an in! So you get a full WiFi Controller and you are
able to manage the WLAN APs much easier.^^ this actually :)
I'm currently running pfSense and a Linux machine with Unify controller software in Hyper-V 2012R2 without a sweat.
Unify does need some haggling with Java when you set up the controller, but it works like a charm.
Running 3 cheapest UniFi AP's here, but without a problem.
-
I've been having trouble with coverage at one end of the house, and devices trying to stay with the wrong AP after I added a cheap AP – so I tried the Unifis (the $60 single band) and the zero handoff is working very well.
The software is very nice too and I could see how it would not be hard at all to have dozens of APs.
-
+1 for Ubiquity. Have a couple of them. They just work.
pfSense -> NIC -> VLAN_WAP -> Radius.
-
When you get your Unifi controller set up, dont forget to add DHCP option 43 (string) with a ascii-to-hex converted value of your controller's IP if you want "zero touch" adoption of your WAPs. pfSense makes this easy (put it in additional bootp/dhcp options area). Here's a neat website that does the IP-to-HEX conversion for you:
http://www.miniwebtool.com/ip-address-to-hex-converter/?ip=8.8.8.8:)
