Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    [solved] New errors with WAN (sk0) with upgrade to 2.2.2

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    19 Posts 3 Posters 3.6k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      stefanfa
      last edited by

      This is a few lines from my system.log

      Apr 21 09:17:19 pfSense check_reload_status: Starting packages
      Apr 21 09:17:19 pfSense snmpd[28038]: disk_OS_get_disks: adding device 'ada0' to device list
      Apr 21 09:17:20 pfSense php-fpm[93007]: /rc.start_packages: Restarting/Starting all packages.
      Apr 21 09:34:54 pfSense check_reload_status: Linkup starting sk0
      Apr 21 09:34:54 pfSense kernel: sk0: link state changed to DOWN
      Apr 21 09:34:54 pfSense kernel: sk0: link state changed to UP
      Apr 21 09:34:54 pfSense check_reload_status: Linkup starting sk0
      Apr 21 09:34:55 pfSense php-fpm[45856]: /rc.linkup: DEVD Ethernet detached event for wan
      Apr 21 09:34:56 pfSense php-fpm[53984]: /rc.linkup: DEVD Ethernet attached event for wan
      Apr 21 09:34:56 pfSense php-fpm[53984]: /rc.linkup: HOTPLUG: Configuring interface wan
      Apr 21 09:34:56 pfSense check_reload_status: rc.newwanip starting sk0

      Normally it starts with "check_reload_status: Linkup starting sk0" and then it brings the interface down and up again.
      Sometimes it's just once and sometimes it can repeat itself during the next couple of seconds. up to 4-5 times sometimes.

      Should i check some other log for errors ?

      1 Reply Last reply Reply Quote 0
      • S
        stefanfa
        last edited by

        Replaced old ethernet cable with a brand new one now just to verify it's not the cable.

        Will report back the result.

        1 Reply Last reply Reply Quote 0
        • T
          TieT
          last edited by

          @stefanfa:

          This is a few lines from my system.log

          Apr 21 09:17:19 pfSense check_reload_status: Starting packages
          Apr 21 09:17:19 pfSense snmpd[28038]: disk_OS_get_disks: adding device 'ada0' to device list
          Apr 21 09:17:20 pfSense php-fpm[93007]: /rc.start_packages: Restarting/Starting all packages.
          Apr 21 09:34:54 pfSense check_reload_status: Linkup starting sk0
          Apr 21 09:34:54 pfSense kernel: sk0: link state changed to DOWN
          Apr 21 09:34:54 pfSense kernel: sk0: link state changed to UP
          Apr 21 09:34:54 pfSense check_reload_status: Linkup starting sk0
          Apr 21 09:34:55 pfSense php-fpm[45856]: /rc.linkup: DEVD Ethernet detached event for wan
          Apr 21 09:34:56 pfSense php-fpm[53984]: /rc.linkup: DEVD Ethernet attached event for wan
          Apr 21 09:34:56 pfSense php-fpm[53984]: /rc.linkup: HOTPLUG: Configuring interface wan
          Apr 21 09:34:56 pfSense check_reload_status: rc.newwanip starting sk0

          Normally it starts with "check_reload_status: Linkup starting sk0" and then it brings the interface down and up again.
          Sometimes it's just once and sometimes it can repeat itself during the next couple of seconds. up to 4-5 times sometimes.

          Should i check some other log for errors ?

          Stefan,

          Yes post more lines of the system log (200) and also gateway log and dhcp log

          P.S. i had a similar problem, cable seemed good in the tester, but when bending it a little in a certain way, there was a breach…

          1 Reply Last reply Reply Quote 0
          • S
            stefanfa
            last edited by

            Still getting this problem even with a new cable.

            Here's exactly what's happening in the logs at the time (the other entries in the logs aren't relevant and is atleast 30 minutes before the incident so didn't include them)

            
system.log:
Apr 21 17:33:33 pfSense check_reload_status: Linkup starting sk0
Apr 21 17:33:33 pfSense kernel: sk0: link state changed to DOWN
Apr 21 17:33:33 pfSense kernel: sk0: link state changed to UP
Apr 21 17:33:33 pfSense check_reload_status: Linkup starting sk0
Apr 21 17:33:34 pfSense php-fpm[33475]: /rc.linkup: DEVD Ethernet detached event for wan
Apr 21 17:33:35 pfSense php-fpm[41031]: /rc.linkup: DEVD Ethernet attached event for wan
Apr 21 17:33:35 pfSense kernel: arpresolve: can't allocate llinfo for 80.245.x.x on sk0
Apr 21 17:33:35 pfSense kernel: arpresolve: can't allocate llinfo for 80.245.x.x on sk0
Apr 21 17:33:35 pfSense php-fpm[41031]: /rc.linkup: HOTPLUG: Configuring interface wan
Apr 21 17:33:35 pfSense check_reload_status: rc.newwanip starting sk0
Apr 21 17:33:35 pfSense php-fpm[41031]: /rc.linkup: ROUTING: setting default route to 80.245.x.x
Apr 21 17:33:35 pfSense check_reload_status: Restarting ipsec tunnels
Apr 21 17:33:36 pfSense php-fpm[33475]: /rc.newwanip: rc.newwanip: Info: starting on sk0.
Apr 21 17:33:36 pfSense php-fpm[33475]: /rc.newwanip: rc.newwanip: on (IP address: 80.245.x.x) (interface: WAN[wan]) (real interface: sk0).
Apr 21 17:33:36 pfSense php-fpm[33475]: /rc.newwanip: ROUTING: setting default route to 80.245.x.x
Apr 21 17:33:37 pfSense php-fpm[33475]: /rc.newwanip: The command '/usr/local/sbin/unbound -c /var/unbound/unbound.conf' returned exit code '1', the output was '[1429630417] unbound[57772:0]
error: bind: address already in use [1429630417] unbound[57772:0] fatal error: could not open ports'
Apr 21 17:33:37 pfSense php-fpm[41031]: /rc.linkup: The command '/usr/local/sbin/dhcpd -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpd.conf -pf /var/run/dhcpd.pid em0' returned exi
t code '1', the output was 'Internet Systems Consortium DHCP Server 4.2.6 Copyright 2004-2014 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/soft
ware/dhcp/ Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 4 leases to leases file. Listening on BPF/em0/b4:b5:2f:b4:xx:xx/192.168.10.0/24 Send
ing on   BPF/em0/b4:b5:2f:b4:xx:xx/192.168.10.0/24 Can't bind to dhcp address: Address already in use Please make sure there is no other dhcp server running and that there's no entry for dhcp
 or bootp in /etc/inetd.conf.   Also make sure you are not running HP JetAdmin software, which includes a bootp server.  If you did not get this software from ftp.isc.org, please get the late
st from ftp.isc.org and install that before requesting help.  If you did
Apr 21 17:33:37 pfSense check_reload_status: updating dyndns wan
Apr 21 17:33:38 pfSense php-fpm[33475]: /rc.newwanip: The command '/usr/local/sbin/dhcpd -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpd.conf -pf /var/run/dhcpd.pid em0' returned e
xit code '1', the output was 'Internet Systems Consortium DHCP Server 4.2.6 Copyright 2004-2014 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/so
ftware/dhcp/ Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 4 leases to leases file. Listening on BPF/em0/b4:b5:2f:b4:xx:x/192.168.10.0/24 Se
nding on   BPF/em0/b4:b5:2f:b4:xx:xx/192.168.10.0/24 Can't bind to dhcp address: Address already in use Please make sure there is no other dhcp server running and that there's no entry for dh
cp or bootp in /etc/inetd.conf.   Also make sure you are not running HP JetAdmin software, which includes a bootp server.  If you did not get this software from ftp.isc.org, please get the la
test from ftp.isc.org and install that before requesting help.  If you di
Apr 21 17:33:38 pfSense php-fpm[33475]: /rc.newwanip: phpDynDNS (): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Apr 21 17:33:38 pfSense php-fpm[56955]: /rc.dyndns.update: phpDynDNS (): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Apr 21 17:33:39 pfSense php-fpm[33475]: /rc.newwanip: Resyncing OpenVPN instances for interface WAN.
Apr 21 17:33:39 pfSense php-fpm[33475]: /rc.newwanip: Creating rrd update script
Apr 21 17:33:41 pfSense php-fpm[33475]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 80.245.xx.xx ->  80.245.xx.xx - Restarting packages.
Apr 21 17:33:41 pfSense check_reload_status: Starting packages
Apr 21 17:33:41 pfSense snmpd[80541]: disk_OS_get_disks: adding device 'ada0' to device list
Apr 21 17:33:42 pfSense php-fpm[63488]: /rc.start_packages: Restarting/Starting all packages.

 `gateways.log:
Apr 21 17:33:36 pfSense apinger: SIGHUP received, reloading configuration.` 

 `dhcpd.log
Apr 21 17:33:34 pfSense dhclient[3367]: connection closed
Apr 21 17:33:34 pfSense dhclient[3367]: exiting.
Apr 21 17:33:35 pfSense dhclient: PREINIT
Apr 21 17:33:35 pfSense dhclient[41779]: DHCPREQUEST on sk0 to 255.255.255.255 port 67
Apr 21 17:33:35 pfSense dhclient[41779]: DHCPACK from 80.245.xx.xx
Apr 21 17:33:35 pfSense dhclient: REBOOT
Apr 21 17:33:35 pfSense dhclient: Starting add_new_address()
Apr 21 17:33:35 pfSense dhclient: ifconfig sk0 inet 80.245.xx.xx netmask 255.255.255.0 broadcast 80.245.xx.xx
Apr 21 17:33:35 pfSense dhclient: New IP Address (sk0): 80.245.xx.xx
Apr 21 17:33:35 pfSense dhclient: New Subnet Mask (sk0): 255.255.255.0
Apr 21 17:33:35 pfSense dhclient: New Broadcast Address (sk0): 80.245.xx.xx
Apr 21 17:33:35 pfSense dhclient: New Routers (sk0): 80.245.xx.xx
Apr 21 17:33:35 pfSense dhclient: Adding new routes to interface: sk0
Apr 21 17:33:35 pfSense dhclient: /sbin/route add default 80.245.xx.xx
Apr 21 17:33:35 pfSense dhclient: Creating resolv.conf
Apr 21 17:33:35 pfSense dhclient[41779]: bound to 80.245.xx.xx -- renewal in 7200 seconds.
Apr 21 17:33:37 pfSense dhcpd: Internet Systems Consortium DHCP Server 4.2.6
Apr 21 17:33:37 pfSense dhcpd: Copyright 2004-2014 Internet Systems Consortium.
Apr 21 17:33:37 pfSense dhcpd: All rights reserved.
Apr 21 17:33:37 pfSense dhcpd: For info, please visit https://www.isc.org/software/dhcp/
Apr 21 17:33:37 pfSense dhcpd: Internet Systems Consortium DHCP Server 4.2.6
Apr 21 17:33:37 pfSense dhcpd: Copyright 2004-2014 Internet Systems Consortium.
Apr 21 17:33:37 pfSense dhcpd: All rights reserved.
Apr 21 17:33:37 pfSense dhcpd: For info, please visit https://www.isc.org/software/dhcp/
Apr 21 17:33:37 pfSense dhcpd: Wrote 0 deleted host decls to leases file.
Apr 21 17:33:37 pfSense dhcpd: Wrote 0 new dynamic host decls to leases file.
Apr 21 17:33:37 pfSense dhcpd: Wrote 4 leases to leases file.
Apr 21 17:33:37 pfSense dhcpd: Listening on BPF/em0/b4:b5:2f:b4:xx:xx/192.168.10.0/24
Apr 21 17:33:37 pfSense dhcpd: Sending on   BPF/em0/b4:b5:2f:b4:xx:xx/192.168.10.0/24
Apr 21 17:33:37 pfSense dhcpd: Can't bind to dhcp address: Address already in use
Apr 21 17:33:37 pfSense dhcpd: Please make sure there is no other dhcp server
Apr 21 17:33:37 pfSense dhcpd: running and that there's no entry for dhcp or
Apr 21 17:33:37 pfSense dhcpd: bootp in /etc/inetd.conf.   Also make sure you
Apr 21 17:33:37 pfSense dhcpd: are not running HP JetAdmin software, which
Apr 21 17:33:37 pfSense dhcpd: includes a bootp server.
Apr 21 17:33:37 pfSense dhcpd:
Apr 21 17:33:37 pfSense dhcpd: If you did not get this software from ftp.isc.org, please
Apr 21 17:33:37 pfSense dhcpd: get the latest from ftp.isc.org and install that before
Apr 21 17:33:37 pfSense dhcpd: requesting help.
Apr 21 17:33:37 pfSense dhcpd:
Apr 21 17:33:37 pfSense dhcpd: If you did get this software from ftp.isc.org and have not
Apr 21 17:33:37 pfSense dhcpd: yet read the README, please read it before requesting help.
Apr 21 17:33:37 pfSense dhcpd: If you intend to request help from the dhcp-bugs at isc.org
Apr 21 17:33:37 pfSense dhcpd: mailing list, please read the section on the README about
Apr 21 17:33:37 pfSense dhcpd: submitting bug reports and requests for help.
Apr 21 17:33:37 pfSense dhcpd:
Apr 21 17:33:37 pfSense dhcpd: Please do not under any circumstances send requests for
Apr 21 17:33:37 pfSense dhcpd: help directly to the authors of this software - please
Apr 21 17:33:37 pfSense dhcpd: send them to the appropriate mailing list as described in
Apr 21 17:33:37 pfSense dhcpd: the README file.
Apr 21 17:33:37 pfSense dhcpd:
Apr 21 17:33:37 pfSense dhcpd: exiting.
Apr 21 17:33:38 pfSense dhcpd: Internet Systems Consortium DHCP Server 4.2.6
Apr 21 17:33:38 pfSense dhcpd: Copyright 2004-2014 Internet Systems Consortium.
Apr 21 17:33:38 pfSense dhcpd: All rights reserved.
Apr 21 17:33:38 pfSense dhcpd: For info, please visit https://www.isc.org/software/dhcp/
Apr 21 17:33:38 pfSense dhcpd: Internet Systems Consortium DHCP Server 4.2.6
Apr 21 17:33:38 pfSense dhcpd: Copyright 2004-2014 Internet Systems Consortium.
Apr 21 17:33:38 pfSense dhcpd: All rights reserved.
Apr 21 17:33:38 pfSense dhcpd: For info, please visit https://www.isc.org/software/dhcp/
Apr 21 17:33:38 pfSense dhcpd: Wrote 0 deleted host decls to leases file.
Apr 21 17:33:38 pfSense dhcpd: Wrote 0 new dynamic host decls to leases file.
Apr 21 17:33:38 pfSense dhcpd: Wrote 4 leases to leases file.
Apr 21 17:33:38 pfSense dhcpd: Listening on BPF/em0/b4:b5:2f:b4:xx:xx/192.168.10.0/24
Apr 21 17:33:38 pfSense dhcpd: Sending on   BPF/em0/b4:b5:2f:b4:xx:xx/192.168.10.0/24
Apr 21 17:33:38 pfSense dhcpd: Can't bind to dhcp address: Address already in use
Apr 21 17:33:38 pfSense dhcpd: Please make sure there is no other dhcp server
Apr 21 17:33:38 pfSense dhcpd: running and that there's no entry for dhcp or
Apr 21 17:33:38 pfSense dhcpd: bootp in /etc/inetd.conf.   Also make sure you
Apr 21 17:33:38 pfSense dhcpd: are not running HP JetAdmin software, which
Apr 21 17:33:38 pfSense dhcpd: includes a bootp server.
Apr 21 17:33:38 pfSense dhcpd:
Apr 21 17:33:38 pfSense dhcpd: If you did not get this software from ftp.isc.org, please
Apr 21 17:33:38 pfSense dhcpd: get the latest from ftp.isc.org and install that before
Apr 21 17:33:38 pfSense dhcpd: requesting help.
Apr 21 17:33:38 pfSense dhcpd:
Apr 21 17:33:38 pfSense dhcpd: If you did get this software from ftp.isc.org and have not
Apr 21 17:33:38 pfSense dhcpd: yet read the README, please read it before requesting help.
Apr 21 17:33:38 pfSense dhcpd: If you intend to request help from the dhcp-bugs at isc.org
Apr 21 17:33:38 pfSense dhcpd: mailing list, please read the section on the README about
Apr 21 17:33:38 pfSense dhcpd: submitting bug reports and requests for help.
Apr 21 17:33:38 pfSense dhcpd:
Apr 21 17:33:38 pfSense dhcpd: Please do not under any circumstances send requests for
Apr 21 17:33:38 pfSense dhcpd: help directly to the authors of this software - please
Apr 21 17:33:38 pfSense dhcpd: send them to the appropriate mailing list as described in
Apr 21 17:33:38 pfSense dhcpd: the README file.
Apr 21 17:33:38 pfSense dhcpd:
Apr 21 17:33:38 pfSense dhcpd: exiting.`
            1 Reply Last reply Reply Quote 0
            • S
              stefanfa
              last edited by

              Tried switching the interfaces now to see if there's something with a NIC.

              1 Reply Last reply Reply Quote 0
              • S
                stefanfa
                last edited by

                Yep it's my sk0 interface.

                WAN is ok now and LAN is on static.

                but sk0 still being reset but atleast now it's being ignored cause it's on static ip.

                wonder if it's the driver or the card..

                1 Reply Last reply Reply Quote 0
                • C
                  cmb
                  last edited by

                  Might want to try swapping WAN and LAN assignments, see if it's just that NIC not playing nicely with your modem or whatever you have it plugged into. If the problem goes away, that's probably it. If the problem stays on your WAN, it's probably a modem issue. If the problem moves to LAN, probably a NIC issue.

                  1 Reply Last reply Reply Quote 0
                  • S
                    stefanfa
                    last edited by

                    Ye that's just what i tried.

                    problem moved to LAN when i switched.

                    So question is then if it's a driver issue or a hardware issue.

                    I'm considering getting a intel NIC instead.

                    1 Reply Last reply Reply Quote 0
                    • S
                      stefanfa
                      last edited by

                      Funny story though.

                      It's triggering rc.newwanip on my LAN interface ?

                      Is it supposed to do that ?

                      Apr 22 12:57:30 check_reload_status: rc.newwanip starting sk0
                      Apr 22 12:57:31 php-fpm[87758]: /rc.newwanip: rc.newwanip: Info: starting on sk0.
                      Apr 22 12:57:31 php-fpm[87758]: /rc.newwanip: rc.newwanip: on (IP address: 192.168.10.254) (interface: LAN[lan]) (real interface: sk0).

                      1 Reply Last reply Reply Quote 0
                      • C
                        cmb
                        last edited by

                        @stefanfa:

                        It's triggering rc.newwanip on my LAN interface ?

                        Is it supposed to do that ?

                        Yes, that runs any time any interface gains link. It won't do much of anything when on a static IP LAN interface.

                        1 Reply Last reply Reply Quote 0
                        • S
                          stefanfa
                          last edited by

                          Ah ok =)

                          Anyway. This isn't really a problem anymore for me.

                          I know what caused the issues now.

                          Therefore i would like to take this opportunity to thank everyone who has been helping me out with this issue =)

                          Thanks !

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post
                          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.