Multi LAN and Multi WAN

[jaymin]

Hey guys,

I have install two LAN and two WAN in pfsense.

LAN1(192.168.0.250/24) and WAN1is selected during installation then I install LAN2(192.168.200.1/24) and wan2 as opt1 and opt2.

in LAN1 when default gateway is wan1 i can ping lan1 to lan2.

like
client 192.168.0.180  (default gaterway WAN1) can ping 192.168.200.1 and 192.168.200.2

but same setup if i change default gateway wan2 in same lan1 ip it cannot pind lan2 ip

like
client 192.168.0.180  (default gaterway WAN2) can ping 192.168.200.1 but cannot ping 192.168.200.2

in rules….
i have allow all traffic with all ports in LAN1 and LAN2...

please help to resolve issue...

[tim.mcmanus]

Can you post screen shots of your firewall rules.  That might help with troubleshooting.

I created a specific rule on both my LAN and LAN2 networks to pass traffic between them.  See the attached screen shot.  It's above the gateway rule so that internal traffic hits that rule first.