MultiWAN with less physical interfaces
-
Hi guys, I have the following situation:
LAN <pfsense>MultiWAN Load Balancinginterface configuration in pfSense is structured as follows:
eth0 - LAN 10.0.0.0 / 8
eth1 - WAN 1 192.168.0.1/24 GW
eth2 - WAN2 192.168.1.1/24 GW
eth3 - WAN3 192.168.2.1/24 GWThe problem is this the server has no other physical network interfaces and I need to add two more WAN interfaces.
I tried to put all the GW on WAN1 class 192.168.0.1-2-3 / 24 but pfsense could not do load balancing.
What should do in this situation?
Virtual interfaces? VLANs? and how to configure it?</pfsense>
-
you'd need a manageable switch that supports vlan tagging.
-create a seperate vlan for each wan-connection
-add all "modems" on untagged ports on the switch / but on a diff vlan for each connection
-create a trunk port that includes all vlans and connect it to your pfsense machine. -
I've this switch
http://www.tp-link.us/resources/software/200796024748.pdfBut I never set up this type of equipment, can you give me an hand? in the manual that I have attached see page 58.
I think I need to enable Tag VLAN but then I do not know what to do.
Thank you!!!
-
Here you have an example, is in Spanish…... is from a 2109WEB, Port 1 is the "Trunk port" (taged), ports 2 to 8 are the "Access ports" (untaged)
http://forum.pfsense.org/index.php/topic,47388.msg249100.html#msg249100